pretty good time, i ran a little bit slower than yours but mine was a coupe instead of a hatch. plus mine was chipped to hit about 8,000 without the knock sensor
yes its infenion.. yes its bracket racing. i came in 2nd out of 66 cars that day..to re state everything its a 94 cx hatch with a 95 d16z6. only mods is a aem intake, chikara header, and a reflashed ecu with a 7500 redline
yes preludes are very heavy you take the h22 out and put it in a hatch or civic coupe its fast my boy has a semi built h22 in his hatch and last run he didi was 13.50
That Down hill track help it a ton....I usually do pulls on down hills because its like woah!! race it on a flat track hed run a slower time...all for all i love it stock....mines only made it into the 15's stock same things with out a chip because the D16z6 already has a redline of 7500
That track looks like Infineon, its not downhill, if anything its a little uphill. I used to run this track and Sacramento, Sac would be .2-.3 faster and 2-3mph faster.
Who cares? I would hope it would beat him! Its guys like you that have a Civic and hate on another guy with the same ride beacause he does'ent have a K swap! Get a life and quit Honda hateing!Runing a 14.7" is pretty good with a DD that's pretty much stock!you're a looser and probaly drive a Hyndai and wishes he had a K20 swapped EK!
And there is such a thing as a JDM Z6, its called a ZC sohc vtec. It is the exact same engine as the Z6. The D15b has the same head as a Z6 but not the same bottom end, so tjat makes them differemt.
You can all so get a ZC non-vtec sohc, it is the exact same thing as the A6, escept it is OBD1 and has 10 more hp stock. I have one in my EG.
Yes it is possible for a sohc to hit those times!BISI form Bisimotto industries, holds te world record for fastest SOHC Honda all motor record at 9.45" @ 145 mph. He designs and makes most of his parts, which tyou can buy from him. He's the best, I have a D16 nonvtec all motor with Bisi parts running in the 12's on sreet tires.
it had no lsd.. i was using falken azenis. 15x6.5 in the front. the back were my old 16inch heavy ass rims. i now have motegi tracklites. like i said before. THE ONLY mods done were intake, header, ecu chipped to a 7500rpm redline..other then that it had some cheap ass coilovers with stock shocks and those rims. the interior was all there except back seats.
anyone know if their is a all motor d16-15 that runs 11 secs or is that not possible for a d, and if it is can it do it on pump gas, and street legal, plz help me out
anyone that knows honda motors knows that the d16z6 is the 92 to 95 civic ex vtec motor for only us the d15b is the jdm version and the d15b is a all around better motor is puts out better hp and tourqe than the us version
its just aem cai, chikara 50 dollar header, and my ecu was chipped but only thing done to the ecu was upped the redline to 7500 so when i shifted it would bring the rpms higher in the next gear. i now just got done swappin in a H2B. (jdm H22a motor with a JDM B16 lsd tranny. we will see how that goes. vids up soon
How much does your hatch weigh? Is it gut or you still running full interior? That's quick for just I/H/E, nice run.
D16guy 3 months ago
prettie nice. i did 15.5 at 89mph with 2.4 60ft on street tires with just i/h/e stock ecu...
joshkx 1 year ago
LONG LIVE THE SOHC!!!
Great numbers, clean hatchy bro
calcatchem 1 year ago
pretty good time, i ran a little bit slower than yours but mine was a coupe instead of a hatch. plus mine was chipped to hit about 8,000 without the knock sensor
changyd18 1 year ago
Lol, good times.
420witchdoctor 1 year ago
this looks like infineon raceway.
MacJeezyFBaby 1 year ago
Damn thats quick.
vtecsux85 2 years ago 2
impressive time with those mods man!
i got the same engine, same mods n was curious myself lol PROPS
Beejltd 2 years ago
yes its infenion.. yes its bracket racing. i came in 2nd out of 66 cars that day..to re state everything its a 94 cx hatch with a 95 d16z6. only mods is a aem intake, chikara header, and a reflashed ecu with a 7500 redline
skunk2eg 2 years ago
i cant wait to get a skunk2 cam and intake and see what my d16z6 will do at the track!
iknowcarsalot4444 3 years ago
dam 14.71.. that sounds good because my friend's prelude ran 15.9 or something like that. jeez, it means preludes are heavy as fuck.
RedlineXD 3 years ago
yes preludes are very heavy you take the h22 out and put it in a hatch or civic coupe its fast my boy has a semi built h22 in his hatch and last run he didi was 13.50
esco231 2 years ago
My Accord ran 15.9 with 130 whp and 3000 lbs even with me in it, was his prelude an auto?
jaxmarine85 2 years ago
@jaxmarine85 her prelude is manual, she is pretty light too, lol
RedlineXD 2 years ago
I would be so mad if this was my car. Ive learned from NA single cam builds. Most ive ever seen was 170hp.
koa420 3 years ago
this is just i/h/e
IAmMrFlippers 2 years ago
yea its best to boost them, cheaper too
panoulis20 2 years ago
brkt racing? or just slow off the line? shits fast for sohc nice car bud
Stevo91gs 3 years ago
man that thing screams, i hope mine sounds like that after i finish my p29 z6 build.
Cervan 3 years ago
haha
this is infineon raceway
SubwayGUY48 3 years ago
Good time for the mods man.
braderunnah 3 years ago
looks like a flat track with a hill at the end 2 me
rebel0706 3 years ago
That Down hill track help it a ton....I usually do pulls on down hills because its like woah!! race it on a flat track hed run a slower time...all for all i love it stock....mines only made it into the 15's stock same things with out a chip because the D16z6 already has a redline of 7500
ChiNOoOoOo 4 years ago
That track looks like Infineon, its not downhill, if anything its a little uphill. I used to run this track and Sacramento, Sac would be .2-.3 faster and 2-3mph faster.
de4725 4 years ago
looks pretty down hill to me with the up hill thats at the end of the track for braking purposes.
ChiNOoOoOo 4 years ago
7200
authmaax 3 years ago
This comment has received too many negative votes show
my ek has a k20 with a itb setup man, i will eat that p.o.s. for din-din like a Clam on my TUMMMMAY`
duischooldunce 4 years ago
Who cares? I would hope it would beat him! Its guys like you that have a Civic and hate on another guy with the same ride beacause he does'ent have a K swap! Get a life and quit Honda hateing!Runing a 14.7" is pretty good with a DD that's pretty much stock!you're a looser and probaly drive a Hyndai and wishes he had a K20 swapped EK!
GSR187 4 years ago 11
lol I agree
ChiNOoOoOo 4 years ago
And there is such a thing as a JDM Z6, its called a ZC sohc vtec. It is the exact same engine as the Z6. The D15b has the same head as a Z6 but not the same bottom end, so tjat makes them differemt.
You can all so get a ZC non-vtec sohc, it is the exact same thing as the A6, escept it is OBD1 and has 10 more hp stock. I have one in my EG.
GSR187 4 years ago
thought the ZC was Dohc non vtec?
b00stedrust 3 years ago
There is more then one. Dohc and Sohc!Either vtec or non!
GSR187 3 years ago
Yes it is possible for a sohc to hit those times!BISI form Bisimotto industries, holds te world record for fastest SOHC Honda all motor record at 9.45" @ 145 mph. He designs and makes most of his parts, which tyou can buy from him. He's the best, I have a D16 nonvtec all motor with Bisi parts running in the 12's on sreet tires.
GSR187 4 years ago
it had no lsd.. i was using falken azenis. 15x6.5 in the front. the back were my old 16inch heavy ass rims. i now have motegi tracklites. like i said before. THE ONLY mods done were intake, header, ecu chipped to a 7500rpm redline..other then that it had some cheap ass coilovers with stock shocks and those rims. the interior was all there except back seats.
skunk2eg 4 years ago
anyone know if their is a all motor d16-15 that runs 11 secs or is that not possible for a d, and if it is can it do it on pump gas, and street legal, plz help me out
taimoor006 4 years ago
anyone that knows honda motors knows that the d16z6 is the 92 to 95 civic ex vtec motor for only us the d15b is the jdm version and the d15b is a all around better motor is puts out better hp and tourqe than the us version
bigmothermudder 4 years ago
did your d16z6 have the jdm d16z6 lsd tranny?
blackjackwabam 4 years ago
There is no such thing as a JDM D16Z6. I think you're talking about the JDM D15B.
ACRxJommel 4 years ago
how the hell your car is faster than mines
TurboD16z6 4 years ago
wow..how much does your car weighs??
ixeckoxi 4 years ago
Pretty good for only bolt-ons.
ksaechao97 4 years ago
nice car man..what tires are you using?
HsamehH 4 years ago
sweet!when u get that video done comment me back.thaxz
TaLoCc 4 years ago
Fuccin loud n Fast for a sohc.u make me wanna go sohc on my eg!Tell me more about ur car n wat u did to it!!!
TaLoCc 4 years ago
its just aem cai, chikara 50 dollar header, and my ecu was chipped but only thing done to the ecu was upped the redline to 7500 so when i shifted it would bring the rpms higher in the next gear. i now just got done swappin in a H2B. (jdm H22a motor with a JDM B16 lsd tranny. we will see how that goes. vids up soon
skunk2eg 4 years ago
Props! I have always loved the SOHC all motor Hondas. You have a dyno on this?
canyonbeater 4 years ago
Nice. What's the weight of the car and chip?
dvang066 4 years ago
nice launch. 0-60 must have been around 2.1-2.2? very impressive for an sohc
tommieboi707 4 years ago
60' esd 2.2 i ran it with a 55 shot after that and hit a 13.6 but i dont have a video for it!
skunk2eg 4 years ago
Dam thats quick for a d16z6 with basics. Thumbs up!
eightysixpanda 4 years ago
dam dat d16 got some power
filipinoak47 5 years ago
wat was the time?
XIONGSTARBOI 5 years ago
wat r running under the hood
maimoua 5 years ago
d16z6 with intake,header,exhuast
skunk2eg 5 years ago
nice run
racingkid 5 years ago