Painted interior panels 95 s10

[TheJohnnymofo]

looks good bro but u worked too hard on it to mess it up putting it bak in i got a 97 s10 i painted mine up too i even took the vents apart and painted them but i left the inside part of the vent the original color and the part u use to change the direction of the inside vent it looks sweet plus i did the pillar covers i plan on doing my door parts soon maybe ill get a video up but all i did was clean the parts and spray em

[psyfertech]

@TheJohnnymofo Thanks man and I know right, I mean its barely noticable but I was sooo mad lol. That sounds awesome though man, I want to do my doors too I only did the little part that pops off

[7Aldinho4]

Hey bro this looks nice as hell I want to do it on my car .. you should post a video on how to do it that would be awesome bro thanks

[lundyfan30]

tastfully done :) nice!

[supersanchez1991]

what type of paint did you use i want to do the same on my s10 but yellow please tell me the brand and the paint please

[FelixE96]

Trim



[monkeyguys55]

is it possible to paint it with the leathery look and it still look good?.

[jtc7233]

ugly as shit



[dudemanbrok]

Wow man, good job. So after you clear coated, you wet sand again? Then.. re paint, and apply more clear coat?

[vfIskullangel]

Very nice man I did mine to my camaro recently and they came out great. Did you use Duplicolor?

[ryanbret1993]

hey man heres a lil tip for ya. i did the same thing to my 94 s10 on in red. with the vents being melted in, all u gotta do to get them out is take a screw driver (flathead) and pry off the melted plastic, after painting what u wanna paint just hotglue them back in. mines been holdin up for 2 years perfectly. still a snug fit too. just a pointer. btw, thats a nice candy paint look u got goin on. wish i woulda wet sanded mine now haha.

[kevin8935]

how do you get a glossy finish?

[psyfertech]

@kevin8935 wet sanding and buffing

[CTCCustoms]

you can fix the chips by taking a paper plate and spray it then take a paint brush and paint it with that. Just a little tip.

[psyfertech]

@CTCCustoms wow thats actually a great tip, its bublin quite a bit now and chipping so i might do that soon rather than having to repaint the whole thing

[CTCCustoms]

@psyfertech Yeah. I have done that on alot and it works really good. If you have any more questions please let me know. I paint cars so I can help you with any questions you might have.

[psyfertech]

@CTCCustoms hell yea, i really apreciate it man ill hit ya up

[bassline123456789]

man thats turned out sweet, ive been paintin stuff in my cars interior aswel, ill be doin a update video soon to show the dif

[patriotsdynastyku]

wut type of paint and color did u use ??????

[bartelz1]

do the heater/ a/c knobs bro, that'd be sick

[psyfertech]

@bartelz1 good idea man, the next thing i do to it will be converting all of my dash lighting to blue leds or white

[brankovergara]

get a new car nigga hahahaha i smoke that pice of shit with my integra

[jordan22828]

where are all of the screws or bolt that hold it ? show a vid if possible

[psyfertech]

@jordan22828 they r just where the tac and all that r theres 2 bolts and the rest pops off

[tiro00]

hey bro its coming out clean... i wana do the same to mine, i pretty much have the same dash as yours.. i have a gmc jimmy 1996. is it hard fiberglassing ? can u tell me the materials that u have to use n post up a video step by step how u do it ?

[psyfertech]

@tiro00 i could do a video next time i fiberglass somethign like my roll pan or whatever but be careful taking off that dash trim cuz u can break the hazard button so easily, i have a vid of that up and when they break they stay stuck on

and i appreciate it man

basically to fiberglass stuff u need the fiberglass itself, resin, body filler, primer, paint, clear coat all that lol

[tiro00]

@psyfertech yea bro i would really appriciate it, if you show me step by step n what material to use i really want fiberglass my dash .. but i want to start simple like my arm rest like the one u did on one of your videos..and question how did u take off the panel of your doors and the sides vents ? u should check out my car on my profile!

[jakec1223]

i'm in the prcess of painting my interior of my blazer maybe i'll put up a vid soon

[psyfertech]

@jakec1223 dude hell yea

definatly puta vid in response to this lol

ill be more than happy to check it out bro

[mclasidewindersdrift]

I would do a custom console and paint it that color so you carn draw the attention all through the truck and not just the dash board. Looks good though. : )

[psyfertech]

@mclasidewindersdrift i agree with you, i plan on glassing the door panels and the rear panels for speaker pods

and yea ill probably go get a console thats in better shape and glass it so i can get a smooth shiney appearance but thanks bro

[brianwillis1984]

you can pop those vents out. take a small flat head screw driver and pry by the hinge of the vent thats how i did mine

[psyfertech]

@brianwillis1984 when i took them off i looked at it a couple of times and there are like plastic tabs that are melted together holding it in there so i just taped it off but oh well cant go back now

lol, it looks good for now

[psyfertech]

@brianwillis1984 actually now that i think about it your talking about the vents themselves, i did take those out but what i meant in the vid is the trim around them

[FxOxC]

the vents on the glove box look good just like that dont paint the glove box, you did alot of work on painting those parts they look very nice!!! =D

[psyfertech]

@FxOxC thanks man i appreciate it and yea the glove box would look pretty dumb but your rite i spent like 2 or 3 days working on just this one bezel and it turned out pretty good, i mean not the best but for my first time ever doing this it looks pro as fuck

[FxOxC]

@psyfertech yup keep up the hardwork!!! =D

[ghfanatic3]

definately the trim bro. shit looks hot man. keep it up!

[psyfertech]

@ghfanatic3 hell yea, so far 3 ppl suggested the trim so im definatly doing it, all i have to do is get a new passenger side one cuz its snapped at one spot but its all good nothing a junkyard wont have lol

[Lukethebeast101]

I think you should do the trim...would look dope...good work bro!

[psyfertech]

@Lukethebeast101 hell yea man i think i will and thanks, im possibly getting a job here soon that pays 11.25 starting out so ill be baggin this bitch asap lol well i gotta throw some 22's on it first though lol

[Lukethebeast101]

@psyfertech YEEEE lol....sounds tight I can't wait to see it. Before buying your your 22's make a vid of all the ones your thinking of so we can give you some input.

[psyfertech]

@Lukethebeast101 hell yea dude i will, im thinking of getting the escalade 22's and then getting the adapters so it will fit my 5 lug pattern but i dunno just an idea, but ill definatly upload a vid, it should be soon

im also gonna get a street bike to have for some secondary transportation while im workin on tha sdime lol