WARNING: ARMSCOR 1911A1 G.I. It's not mil-spec. Parts from Military supplied 1911A1's won't fit. Aesthetically cool but soft metal parts and would easily worn out. Replace ARMSCOR EXTRACTOR. IT BREAKS EASILY.
Mr. Ernie Claudio (President of my gun club, CPPSA; and gunsmith) kindly did it for free.
You can actually do it yourself if you have a grinding wheel. Grind the back part of the hammer (rounded shape) until short enough. Then, cover the grinded part with Perma Blue to give it a finished look. I trusted Mr. Ernie Claudio since he's way more experienced than I am and he knew what he was doing.
For the resale value, it's a 1911. You won't lose too much money unless you really abuse the gun. Resale value will also depend on how clever you customize and add value to the gun. For this part, you have to get more technical and innovative.
Now the important question, would I recommend this as your first pistol? The first thing I have to know before making any recommendation is, what will be the purpose of your first pistol (defense, competition, collection, fun, or something else)?
@TheAgeOfExploration As for the purpose....all of the above hehe...but my budget is really small because I am just a fresh grad.
I think whats most important to me is that the pistol will allow me to learn the basics of marksmanship without some form of design flaw thats going mess up my fundamentals
If learning the basics and a historical design that influenced most of the modern pistols we see today are some things you'd appreciate, I think the Armscor 1911 fits your purpose and budget. Please note that there are other reasons/purposes that people would consider in buying their first pistol (ex. concealed carry -- please be aware of gun laws and gun culture in your country/area). There are other reasons.
Please watch my update videos to get a better idea of the gun as well.
If you are really serious about guns, I think you would appreciate the 1911.
If you have a different frame of mind, my best recommendation would be to check out similar brands in the same price range (ex. Norinco, Taurus, local gun manufacturers in your country, etc.) and try them out. Your personal "feel" of the gun is actually a very important factor. It will determine if you like the gun or not. It will determine how motivated you will be to use it or even pick it up.
@TheAgeOfExploration Makes sense....is there a shooting range in the Metro Manila area that has a wide selection of hand guns for renting? Only one I have tried so far is the one in MCS and they don't have a lot of pistols
Based on my experience, most shooting ranges in Metro Manila (or in general, here in our country) do not have a wide selection of guns for rent. Most rentals range from pistols (9mm, .45 ACP, sometimes .38 Super and .40 S&W), revolvers (.38 Special) and the occasional shotgun (12 gauge).
If you have friends or know of friendly people who are willing to lend you their guns, that would be my best recommendation. I also have this "dilemma". I wish I could try out more guns. :(
If you won't be able to pass by Manila in July or November for the gun show (it's usually in SM Megamall in Pasig), I think that seems like an okay buy. The normal retail for the Armscor 1911 GI goes for 16,500 pesos. Your license cost is pretty good since it can go as high as 7,000 pesos in Manila. If you are aware of other gun stores or promos that occasionally come by and you see better prices, I would advise that.
I got the unit for 14,000 pesos (that's around 320 US dollars) in the last gun show (November 2010). Total cost (all fees: unit price + license fee) was 18,500 pesos (that's around 425 US dollars). *Calculated US dollar equivalent using current foreign exchange rates
For home defense, it would serve well since it has the knockdown power of the .45 ACP. I would strongly advise that you shoot and practice with your gun in order to gain the necessary confidence and familiarity to operate it in the event (which I hope never happens) you ever have to use it. I have found that factory (not reloaded) FMJ (Full Metal Jacket) feeds and functions the most reliably with the Armscor 1911 GI.
For speed shooting, you may use it as well. It's a 1911 and it has an amazing trigger. You can have the trigger lightened and improved if you wish to get even faster shots. Ergonomics (feel and operation) of the gun is very good and natural in my opinion.
Take note for practical competitions, this is a single-stack pistol. It holds only 8 rounds per magazine when used in competitions. Be prepared to equip yourself with around 6 magazines if you will be seriously competing.
@TheAgeOfExploration@TheAgeOfExploration Thanks a lot again. I find also the good use of an airsoft on basic speed shooting (doing simulations in the backyard), and I found youtube or channels like yours helps "a lot".
hi. i experienced hammer bites too when i used my piece in a shooting range back in our homeland... very nice and informative video.... mabuhay po kayo....
my GI all stock armscor .45 acp has amazed most shooters ive met. the trigger pull is just so smooth those 1st time shooters can put holes in alpha area of a target board in 10-15 yards.
That's true. One reason why the 1911 design is so good is because of its trigger. It's very light and short (the length of the trigger pull) compared to most modern semi-automatic pistols that we see out there nowadays.
@TheAgeOfExploration the only problem i notice on my chamber is that it takes time for it to smoothly acccept a hollow point ammo. some owners i know take it to a gunsmith and "throat" the chamber.
I'm sorry but I do not have access to a trigger scale. :( According to the Armscor website, the 1911 GI's trigger pull weighs from 1.81 - 2.27 kgs (that's around 4 - 5 lbs). It feels relatively heavy (compared to other 1911s that I've tried) plus the inconvenient design (as seen in the video) does not help either.
WARNING: ARMSCOR 1911A1 G.I. It's not mil-spec. Parts from Military supplied 1911A1's won't fit. Aesthetically cool but soft metal parts and would easily worn out. Replace ARMSCOR EXTRACTOR. IT BREAKS EASILY.
filipinashooter 7 months ago
i can see ur cam by the relection... hahahaha
jarvisarena 10 months ago
hey bro. martin
how much did you pay the GS on trimming down your standard hammer? by 2mm? am I correct?
thanks.
gregmr7171 10 months ago
@gregmr7171
Mr. Ernie Claudio (President of my gun club, CPPSA; and gunsmith) kindly did it for free.
You can actually do it yourself if you have a grinding wheel. Grind the back part of the hammer (rounded shape) until short enough. Then, cover the grinded part with Perma Blue to give it a finished look. I trusted Mr. Ernie Claudio since he's way more experienced than I am and he knew what he was doing.
TheAgeOfExploration 10 months ago
Would you recommend this as my first pistol? How is the resale value?
juki009 11 months ago
@juki009
For the resale value, it's a 1911. You won't lose too much money unless you really abuse the gun. Resale value will also depend on how clever you customize and add value to the gun. For this part, you have to get more technical and innovative.
Now the important question, would I recommend this as your first pistol? The first thing I have to know before making any recommendation is, what will be the purpose of your first pistol (defense, competition, collection, fun, or something else)?
TheAgeOfExploration 11 months ago
@TheAgeOfExploration As for the purpose....all of the above hehe...but my budget is really small because I am just a fresh grad.
I think whats most important to me is that the pistol will allow me to learn the basics of marksmanship without some form of design flaw thats going mess up my fundamentals
juki009 10 months ago
@juki009
If learning the basics and a historical design that influenced most of the modern pistols we see today are some things you'd appreciate, I think the Armscor 1911 fits your purpose and budget. Please note that there are other reasons/purposes that people would consider in buying their first pistol (ex. concealed carry -- please be aware of gun laws and gun culture in your country/area). There are other reasons.
Please watch my update videos to get a better idea of the gun as well.
TheAgeOfExploration 10 months ago
@juki009
If you are really serious about guns, I think you would appreciate the 1911.
If you have a different frame of mind, my best recommendation would be to check out similar brands in the same price range (ex. Norinco, Taurus, local gun manufacturers in your country, etc.) and try them out. Your personal "feel" of the gun is actually a very important factor. It will determine if you like the gun or not. It will determine how motivated you will be to use it or even pick it up.
TheAgeOfExploration 10 months ago
@TheAgeOfExploration Makes sense....is there a shooting range in the Metro Manila area that has a wide selection of hand guns for renting? Only one I have tried so far is the one in MCS and they don't have a lot of pistols
juki009 10 months ago
@juki009
Based on my experience, most shooting ranges in Metro Manila (or in general, here in our country) do not have a wide selection of guns for rent. Most rentals range from pistols (9mm, .45 ACP, sometimes .38 Super and .40 S&W), revolvers (.38 Special) and the occasional shotgun (12 gauge).
If you have friends or know of friendly people who are willing to lend you their guns, that would be my best recommendation. I also have this "dilemma". I wish I could try out more guns. :(
TheAgeOfExploration 10 months ago
gud day! Sir.
i find your post very informative. im from CDO, Phil.
i plan to buy an ArmsCor 1911 A1 FS GI @ WSC here in our place this month.
that FA cost 19th here + 5th license. i got a discount because i work in the Government. all in all it is 26th. is this a good buy?
thanks Bro.
hope to hear from you soon.
gregmr7171 1 year ago
@gregmr7171
Thank you for the kind words. :)
If you won't be able to pass by Manila in July or November for the gun show (it's usually in SM Megamall in Pasig), I think that seems like an okay buy. The normal retail for the Armscor 1911 GI goes for 16,500 pesos. Your license cost is pretty good since it can go as high as 7,000 pesos in Manila. If you are aware of other gun stores or promos that occasionally come by and you see better prices, I would advise that.
I hope this helps. :)
TheAgeOfExploration 1 year ago
@TheAgeOfExploration
well then . . . thanks for the info.
i'll get mine next week.
GodBless :)
keep up your good post.
gregmr7171 1 year ago
how much?
putademuerde2 1 year ago
@putademuerde2
I got the unit for 14,000 pesos (that's around 320 US dollars) in the last gun show (November 2010). Total cost (all fees: unit price + license fee) was 18,500 pesos (that's around 425 US dollars). *Calculated US dollar equivalent using current foreign exchange rates
I hope this helps!
TheAgeOfExploration 1 year ago
@TheAgeOfExploration thanks a lot. is this gun is advisable for home defense or speed shooting?
putademuerde2 1 year ago
@putademuerde2
No problem! :)
For home defense, it would serve well since it has the knockdown power of the .45 ACP. I would strongly advise that you shoot and practice with your gun in order to gain the necessary confidence and familiarity to operate it in the event (which I hope never happens) you ever have to use it. I have found that factory (not reloaded) FMJ (Full Metal Jacket) feeds and functions the most reliably with the Armscor 1911 GI.
TheAgeOfExploration 1 year ago
@TheAgeOfExploration Thanks, I will do that.
putademuerde2 1 year ago
@putademuerde2
For speed shooting, you may use it as well. It's a 1911 and it has an amazing trigger. You can have the trigger lightened and improved if you wish to get even faster shots. Ergonomics (feel and operation) of the gun is very good and natural in my opinion.
Take note for practical competitions, this is a single-stack pistol. It holds only 8 rounds per magazine when used in competitions. Be prepared to equip yourself with around 6 magazines if you will be seriously competing.
TheAgeOfExploration 1 year ago
@TheAgeOfExploration @TheAgeOfExploration Thanks a lot again. I find also the good use of an airsoft on basic speed shooting (doing simulations in the backyard), and I found youtube or channels like yours helps "a lot".
putademuerde2 1 year ago
hi. i experienced hammer bites too when i used my piece in a shooting range back in our homeland... very nice and informative video.... mabuhay po kayo....
wainwright74 1 year ago 2
@wainwright74
Thanks for sharing! I guess I'm not alone when it comes to the hammer bite issue with the 1911 in the GI configuration.
Salamat! Thank you for the kind words! :)
TheAgeOfExploration 1 year ago
my GI all stock armscor .45 acp has amazed most shooters ive met. the trigger pull is just so smooth those 1st time shooters can put holes in alpha area of a target board in 10-15 yards.
lisolangka 1 year ago
@lisolangka
That's true. One reason why the 1911 design is so good is because of its trigger. It's very light and short (the length of the trigger pull) compared to most modern semi-automatic pistols that we see out there nowadays.
TheAgeOfExploration 1 year ago
@TheAgeOfExploration the only problem i notice on my chamber is that it takes time for it to smoothly acccept a hollow point ammo. some owners i know take it to a gunsmith and "throat" the chamber.
lisolangka 1 year ago
Do you have access to a trigger scale?
lafayette512 1 year ago
@lafayette512
I'm sorry but I do not have access to a trigger scale. :( According to the Armscor website, the 1911 GI's trigger pull weighs from 1.81 - 2.27 kgs (that's around 4 - 5 lbs). It feels relatively heavy (compared to other 1911s that I've tried) plus the inconvenient design (as seen in the video) does not help either.
I hope this helps. :)
TheAgeOfExploration 1 year ago