Thanks for the vid, saved me a ton of time. This is identical to my 1995 Ram 2500HD (diesel) Has the same 10mm bolts and everything. Took 15 minutes to swap out thanks to your video.
My left headlight on my 97 dodge ram points down and to the right and shines about 10 feet in front of my truck so it doesnt do me much good. How do i adjust it to point straight? Do i have to remove my headlight completely or is there some way i can adjust it without removing the headlight?
@creepindead You can leave the headlight in your truck. There are two adjusting screws on the backside of the main beam. There should be one on the top and one on the bottom of the lens. You adjust the headlight position by turning these screws. It's easier to adjust them at dusk or at night on a flat surface so that you can see where the beam is aiming as you adjust it. Hope this helps out.
excuse me i have a 2000 dodge ram and i replaced the headlights because they were getting more opaque, and the new lights do not go as far and they are brand new, any advice??
@213mfredy The light should shine just as far as the OE ones. We do recommend replacing the bulbs if your headlights came with them, because they are a test bulb and may not be as strong as the ones you previously had.Hope this helps.
Oh yeah, would it be easier to disassemble and re-assemble the headlights by removing the front bumper? I know it may be extra work, but it would make the installation a whole lot better.
hey man thanks alot, the non sport headlights 94-98 arent the same as this. Just to let you know that headlight you worked on is a 99-02 not 98-02. And FYI only the diesel was available in that body style for 02.
@YouraN1993R ----FALSE-------If you want to straighten someone out on some facts,get 'em right...In '02, the 2500 sport model came equiped with 3 engine options. 5.9 V-8 magnum,8.0 V-10 and the cummins diesel...note: FYI, your corrected.
Thanks for the vid, saved me a ton of time. This is identical to my 1995 Ram 2500HD (diesel) Has the same 10mm bolts and everything. Took 15 minutes to swap out thanks to your video.
Appreciated /salute
NorcalHaley 1 month ago
Oh you have too remove the gasket. (doh) I going too remove it to try figure out why a new bulb won't go back in. Thanks or the video. :)
Tallerico500 1 month ago
FYI, This process is much more difficult when your bumper is tweaked lol. Near impossible to remove the lower bolt closest to primary lamp
dodgekid83 2 months ago
My left headlight on my 97 dodge ram points down and to the right and shines about 10 feet in front of my truck so it doesnt do me much good. How do i adjust it to point straight? Do i have to remove my headlight completely or is there some way i can adjust it without removing the headlight?
creepindead 2 months ago
@creepindead You can leave the headlight in your truck. There are two adjusting screws on the backside of the main beam. There should be one on the top and one on the bottom of the lens. You adjust the headlight position by turning these screws. It's easier to adjust them at dusk or at night on a flat surface so that you can see where the beam is aiming as you adjust it. Hope this helps out.
1aauto 2 months ago
excuse me i have a 2000 dodge ram and i replaced the headlights because they were getting more opaque, and the new lights do not go as far and they are brand new, any advice??
213mfredy 3 months ago
@213mfredy The light should shine just as far as the OE ones. We do recommend replacing the bulbs if your headlights came with them, because they are a test bulb and may not be as strong as the ones you previously had.Hope this helps.
1aauto 3 months ago
you did not show how to remove the lower bolt. that one seems to be a
wildmaninmt 4 months ago
@wildmaninmt The headlight should come out just like the headlight shows.
1aauto 4 months ago
where can I buy a a head light for a 2000 dodge ram sport 4x4?thanks for the video wa sa big help!
SuperD104 4 months ago
@SuperD104 We carry some great headlights for your vehicle located on our website here.
1aauto.com/1A/HeadLights/Dodge/Ram-1500-Truck/-/-/2000
1aauto 4 months ago
will sport model headlights fit NON sport models?
M40kc 5 months ago
Oh yeah, would it be easier to disassemble and re-assemble the headlights by removing the front bumper? I know it may be extra work, but it would make the installation a whole lot better.
mstblue 6 months ago
Bit quite but awesome and helpful
maskedsmily 8 months ago
gret vid it helps alot, thanx...
1987lx 9 months ago
the exact video i needed thanks alot man
fallingzeppelin69 9 months ago
Great video. Were could I get those type of headlights for my 98 ram?
Sickram916 10 months ago
@Sickram916 1A Auto dot com
1aauto 10 months ago
Is it basically the same set up for a 94 cause I did see all the same bolts and the gasket is the same
GrizzlyAdam34 1 year ago
does anyone know how 19.5's ride on a 1998-2001 3/4 dodge?
Patrick3024 1 year ago
hey man thanks alot, the non sport headlights 94-98 arent the same as this. Just to let you know that headlight you worked on is a 99-02 not 98-02. And FYI only the diesel was available in that body style for 02.
YouraN1993R 1 year ago
@YouraN1993R ----FALSE-------If you want to straighten someone out on some facts,get 'em right...In '02, the 2500 sport model came equiped with 3 engine options. 5.9 V-8 magnum,8.0 V-10 and the cummins diesel...note: FYI, your corrected.
tjbohmier46 5 months ago
alot of help thanks!
underarmourfball 1 year ago
@underarmourfball Glad to help!! Please check out our website or youtube channel next time you need parts or information.
1aauto 1 year ago
Comment removed
RoGQuizzno 1 year ago
Great video awesome info. Thanks!
fredneck4x4 2 years ago