i no nothing about these planes and about all the techinal talk but i really love this plane nd it would be my first since its allready made 90% complete do u think it will be ok for me to do
anybody have any issues with the glue they provide with the model? it doesnt seem nearly strong enough. My plane has been drying for hours now and there is still play in the glued joints.
Great flying for 1st time, i know nothing about these but the look like great fun, what's the flying time for a full charge on that one? Whats the max airspeed? And honestly, how hard are they to fly??
hmmm... i will consider this. The only thing really attracting me to the eurofighter is it comes with a functional rudder, ive never modded a plane before so im a bit nervous to do it
thats my point, to fly better you need a rudder. why cant you have another servo plugged into the same channel, so both the rudder and wheel is functional? Its only maybe $5 worth of equipment, its only logical to do that.
Hells are not bad airplanes are the best
MrAfghan02 2 months ago
I cant wait to get flying now! Im new to the RC world and have been watching so many of these videos. Cant wait to finish my A10! ^w^
Ho88e5 4 months ago
Damn man! All these F-16's look soo twitchy compared other models!
TrixXxtaR 6 months ago
I would love to take this thing to afghanistan and do circles around some terorist
Lamb00FGoD 1 year ago
Real F16 has an unstable air frame, most likely this one will be tough to land.
Warrantofficer13 2 years ago
How hard is it to fly it for the first time.
AryanAcepilot36 2 years ago
ooooooooooooooooooooooooooooooooooo!!
elbosketube24 2 years ago
what did s cost???
95hendrik 2 years ago
$139
icool247 2 years ago
cool here in germany its cost ca. 250 € ca.190$
95hendrik 2 years ago
i thinks it too much because theres no landing gear
icool247 2 years ago
yes it s right !!! but the rc plane is really cool XD
95hendrik 2 years ago
dang... u would need very good vision to fly any planes... and how is this guy flying it w/ suglasses on too?
hjlee6192 2 years ago
does this really go 70 mph
protegejustin1999 2 years ago
Hey Dave, what's a better unit: this or the Exceed F-35?
Thanks!
thechoosendude 2 years ago
exceed f-35
RcUniverseGuy 2 years ago
the air in take looka a lot bigger than a real f 16
AiRforCEbrat161 2 years ago
Comment removed
KillerGX 2 years ago
that was bitchin
YEE941 2 years ago
Hi Dave have you had the chance to review the L39 Albatros 64mm duct fan jet from G&C Hobby.
I recently got one and I'm wondering how to balance it .
very little info on the net for this model
one site says the C of G is at 48mm from the L.E. or 1.000 in and 15/16" is that close to what it should be?
Thanks for your appreciated reply
Jake
lesnake001 2 years ago
is this good for beginners
Raymanz 2 years ago
No not at all, you'd better get something like a multiplex easystar or glider. Also, bigger models are always better for beginners.
jxdigital 2 years ago
i no nothing about these planes and about all the techinal talk but i really love this plane nd it would be my first since its allready made 90% complete do u think it will be ok for me to do
batistaanimalbomb 2 years ago
anybody have any issues with the glue they provide with the model? it doesnt seem nearly strong enough. My plane has been drying for hours now and there is still play in the glued joints.
avi8tir 2 years ago
I use Kwik bond 2 part epoxy on my jets. It dries in about 5 minutes but I usually let it sit an hour before flying just to be safe.
2000S10V6 2 years ago
Great flying for 1st time, i know nothing about these but the look like great fun, what's the flying time for a full charge on that one? Whats the max airspeed? And honestly, how hard are they to fly??
Looks like great fun!!
noodles70 2 years ago
Comment removed
thechoosendude 2 years ago
but then the front wheel wont turn, or will it? I havnt thought the concept through very well yet
frederic470 2 years ago
well i wish you luck :)
If i actually get enough courage to cut into my plane. i want to mod it with retracts.
frederic470 2 years ago
hmmm... i will consider this. The only thing really attracting me to the eurofighter is it comes with a functional rudder, ive never modded a plane before so im a bit nervous to do it
frederic470 2 years ago
yeah im going to do the same thing when i get my jet, i didnt decide on which one yet, leaning toward the eurofighter
frederic470 2 years ago
thats my point, to fly better you need a rudder. why cant you have another servo plugged into the same channel, so both the rudder and wheel is functional? Its only maybe $5 worth of equipment, its only logical to do that.
frederic470 2 years ago
thats such a waste of a channel.... planes are meant to fly not to drive
frederic470 2 years ago
if theres no rudder, how is it 4 channel? I count 3: throttle, elevator, aileron
frederic470 2 years ago
no rudder control?
LTF85199 3 years ago
All these ducted fan foamies fly fast, but any fly nice and slow comfortably also?
Ispintechno1 3 years ago
These Jets are made to fly fast. It is possible to fly it slow, but it won't be as comfortable as flying in high speeds
nitroplanes 3 years ago
Is there no FOD worries on the ducted fans?
Nice fly'n by the way.
revmkell 3 years ago
very nice, which fly's better; the f-35, or this model?
longerino 3 years ago
nice plane. to bad it has no wheels??
jediknight73 3 years ago 2
4TH
airsoftboi909 3 years ago
This comment has received too many negative votes show
second!
rcplaneguy1 3 years ago
This comment has received too many negative votes show
First!
superfrogbos 3 years ago