I have a GT5000 that starts choke out but when I push the choke in it dies. I'm draining the gas and replacing the fuel filter today. Any advice will help
I seen an ad in our local paper in my hometown of a 03 craftsman 17 HP Kohler 42 inch deck I may be going to look at it they are asking 550 but the lady said they would take 500
I have a Kohler Command 20 (horizontal shaft) and when it gets really hot it starts sputtering and eventually dies and will not run unless it sits for a while - do you know what would cause that
@BMAN294 usually when the ignition coils go bad they will do that. When they get hot they start to sputter and eventually stall, let it sit for a while to cool off, then it starts up again and does the same thing.
Great video. I have the same engine in the same tractor. Bought it approx. 5 years ago and the motor started blowing oil. I have the motor out and i haven't pulled it apart yet but you video gives me hope that I can get it running again. I wish you had video'd the rebuild. Thanks though. I bought that motor because I understood that the Kohler was the way to go. Payed an extra $300 dollars to get the Kohler instead of the Briggs. I learned this Kohler has had problems.
that's an awesome engine right there! runs smoothly and i love how tough it sounds. that's great you guys got it rebuilt and put it back on the gt5000 where it belongs as opposed to the Briggs ELS. Kohlers are a great engine. nice job.
Kohlers are built like a fucking tank, i took one apart in shop class and it was a bitch to do. I've got an opposed twin 18 horse command series i think. its really torkey to.
Great Job on your Re-Build. That Kohler sounds smooth and tight. It's a little heavier that the Briggs, but a far better engine. Definitly yank out that Briggs and slip the Kohler back in........oh yeah...keep oil in it this time!! LOL!
Oh yeah we put it back in later that day in fact. We also got rid of that easy-drain oil plug which was only finger tight when we got the engine, blown, with no oil in it. I wonder why...
I have the GT5000 Series also with this motor... its an awesome motor except for the 1 issue I have had with it... about 8 months after I bought it... while mowing teh lawn (4" Tall Grass) full throttle the engine just started to hamper down and have trouble keeping RPMs at full throttle... turns out I pushed the rod while mowing.. ;-s Needless to say Craftsman came out and fixed it.. but my gosh... that was weird.
kohler's are my favorite small engines, we have 2 and all i have personally done on either of them is clean the points on the one that was made in 1980-ish. The other is a fuel injected v-twin on a Dixie chopper
Nice- the motor that used to be on my 85 craftsman(14.5HP OHV briggs) would smoke horrible- the valve cover gasket leaks and dripped all over the muffler.
Good thing y caught the leak before it lost all its oil-
I have a GT5000 that starts choke out but when I push the choke in it dies. I'm draining the gas and replacing the fuel filter today. Any advice will help
Caneone420 1 week ago
Nice sounding Kohler my dream one day is to own a newer used ridier with some V-Twin Kohler
schindlerman96 5 months ago
lovely job well done guys
pnutsnz 7 months ago
Do you still have your Zero Turn?
thevidiodude177 9 months ago
Want this on my horse
DMJR13 9 months ago
Briggs are the beat engines money can bay
05fordgtx1 10 months ago
I seen an ad in our local paper in my hometown of a 03 craftsman 17 HP Kohler 42 inch deck I may be going to look at it they are asking 550 but the lady said they would take 500
schindlerman96 11 months ago
That engine looks pretty new to have blowed up. :(
DasMidnightDrifter 1 year ago
how much would yall charge for a motor???
i need one for my rideing mower
tonychall3000 1 year ago
bye bye briggs hello Kohler!
1337bman 1 year ago
I'm not crazy about vertical's but this is a sweet motor.
mrwiggles2 1 year ago
I have a Kohler Command 20 (horizontal shaft) and when it gets really hot it starts sputtering and eventually dies and will not run unless it sits for a while - do you know what would cause that
BMAN294 1 year ago
@BMAN294 usually when the ignition coils go bad they will do that. When they get hot they start to sputter and eventually stall, let it sit for a while to cool off, then it starts up again and does the same thing.
MrShawn305 1 year ago
That's what bench tests are for.
condo630 1 year ago
Great video. I have the same engine in the same tractor. Bought it approx. 5 years ago and the motor started blowing oil. I have the motor out and i haven't pulled it apart yet but you video gives me hope that I can get it running again. I wish you had video'd the rebuild. Thanks though. I bought that motor because I understood that the Kohler was the way to go. Payed an extra $300 dollars to get the Kohler instead of the Briggs. I learned this Kohler has had problems.
ImKnotSane 1 year ago
Where can I buy block like this?, mine is cracked so I need to replace it. It's just like this Kolker Pro 25 hp V twin. Thanks.
marbeer17 1 year ago
those kohlers are quiet right, im looking at a roper gt 22 horse kohler with the 50'deck, advice?
mikeluscher159 1 year ago
im about to buy a honda 25 hp engine can u tell me if that works for a dun buggy ?
lalo41388 1 year ago
i looove the sound of a kohler!!!
Nicko617 1 year ago
@Nicko617 and the reliability!
Motorfordtoyota 1 year ago
that's an awesome engine right there! runs smoothly and i love how tough it sounds. that's great you guys got it rebuilt and put it back on the gt5000 where it belongs as opposed to the Briggs ELS. Kohlers are a great engine. nice job.
mhtube01 1 year ago
Kohlers are built like a fucking tank, i took one apart in shop class and it was a bitch to do. I've got an opposed twin 18 horse command series i think. its really torkey to.
offroadingmachine007 2 years ago
This has been flagged as spam show
u wanna sell it
johnmartinez95 2 years ago
Great Job on your Re-Build. That Kohler sounds smooth and tight. It's a little heavier that the Briggs, but a far better engine. Definitly yank out that Briggs and slip the Kohler back in........oh yeah...keep oil in it this time!! LOL!
Agian, good job.
lmr839 2 years ago
Oh yeah we put it back in later that day in fact. We also got rid of that easy-drain oil plug which was only finger tight when we got the engine, blown, with no oil in it. I wonder why...
LynolsOffice 2 years ago
@LynolsOffice the plastic casing around the engine kinda looks like one of a bmw, chunky black plastic and chrome stripes?
mikeluscher159 10 months ago
@lmr839 why?
Gatewayuser200 6 months ago
ive got a gt5000 had it for eight years somethin like that and its by far the biggest pos ive ever owned
67ovette 2 years ago
how much?
foortiz619 2 years ago
well it is a crapsman
GarrettJDB 2 years ago 2
Good thing you got that rebuilt; that's one expensive engine.
douro20 2 years ago
Would this work horizontally for a go kart?
B04rD3r4LiFe 2 years ago
No. Besides there being no way to mount it horizontally, the carb is different for verticals.
LynolsOffice 2 years ago
not to mention youll seize the pistons to the cylinders
adb140275 2 years ago
Whats the most powerfull you have?
killer454 2 years ago
I guess that would be the Briggs & Stratton 26hp V-twin on the Wizard.
LynolsOffice 2 years ago
@LynolsOffice i guess its all prefrance but id rather have a 10 hp honda than a 15 hp briggs
tyler1234040 1 year ago
that song starting at 0:13 thats from sonic the hedgehog
BlueBirdTC2000RE 3 years ago
Yeah, lol. It's Dave's ringtone.
LynolsOffice 3 years ago
I like the test stand. Where did you get the frame?
biggray94 3 years ago
Its a steel frame salvaged from an old table actually.
LynolsOffice 3 years ago
I have the GT5000 Series also with this motor... its an awesome motor except for the 1 issue I have had with it... about 8 months after I bought it... while mowing teh lawn (4" Tall Grass) full throttle the engine just started to hamper down and have trouble keeping RPMs at full throttle... turns out I pushed the rod while mowing.. ;-s Needless to say Craftsman came out and fixed it.. but my gosh... that was weird.
Flyordie209 3 years ago
Please do the honda mower !!
Smallgasengine1 3 years ago
its amazing how many of theese kohlers end up like that with thrown rods.
pat12047 3 years ago
that wasnt leaking oil... it was pouring oil...xD but nice motor... go check out my mower on my page... i have a 25hp B&S motor
FlyKeithFly 3 years ago
cool. what are you gonna put the motor on
powerbandthriller495 3 years ago
what is the most powerful lawnmower you have?
kyl75 3 years ago
In terms of HP? I guess that'd be the Wizard with the 26hp B&S ELS v-tiwn. This motor is on the GT5000 now, making it the 2nd most powerfull.
LynolsOffice 3 years ago
cool
kyl75 3 years ago
really
thermalnose 3 years ago 2
Ahh, you shoulda left the muffler off man, them things sound great with straight pipes!
82agwayldt11 3 years ago
Yeah, cool they are, affordable they are not. They're almost $1,000 over the cost of a carburetter equipped version of the same Kohler.
LynolsOffice 3 years ago
Yeah it's going back on the Craftsman GT5000
LynolsOffice 3 years ago
You can hear it idle at 4:40, it's pretty quiet at idle too.
LynolsOffice 3 years ago
Wow that is kick ass! great rebuild! kohler huh...gotta mean tone to them as well...
NRP1991 3 years ago
kohler's are my favorite small engines, we have 2 and all i have personally done on either of them is clean the points on the one that was made in 1980-ish. The other is a fuel injected v-twin on a Dixie chopper
wassahilden 3 years ago
I've seen those fuel injected ones online, totaly awesome. They're just like a car with a fuel injector for each cylinder!
LynolsOffice 3 years ago
too bad its goin back in i would have bought it for my cube tractor if 1 i had enough money 2 if it wasnt going to get put into the crapsman
2000F350powerstroke 3 years ago 2
Sweet! That thing runs awesome with a good block! So, with this different block, will this engine still make 25 HP?
Hehe, when Dave said that the muffler probably had gas in it, I prepared by turning the volume down. lol! No bang, though.
themaritimeman 3 years ago
Yeah, the block we bought is from the exact same model engine, and all the parts on it are off the original 25hp motor.
LynolsOffice 3 years ago
Nice!!!!
smokey65662 3 years ago
Do you think that loose bolt may have been the cause of the engine to lose oil and blow in the first place?
MAG315 3 years ago
its another block so its not the blown one but they said that the guy did not put oil or maintain the oil level his engine so it blew
30GB 3 years ago
nice job. runs nice and smooth. should be able to put down plenty of power for that craftsman.
gasman7777 3 years ago
Gotta love Kohler, or at least love them when they work and have oil in them :P
justin3zelda 3 years ago
Sounds really smooth! You can tell it's got some power by the way it tourqued when ya revved it up.
chevykid94 3 years ago
Nice- the motor that used to be on my 85 craftsman(14.5HP OHV briggs) would smoke horrible- the valve cover gasket leaks and dripped all over the muffler.
Good thing y caught the leak before it lost all its oil-
dangeroustoys56 3 years ago
Yeah it lost about 1 quart in those few seconds.
LynolsOffice 3 years ago