can any one tell me that how much minimum signal strength in db is required for a tp link WA501G in station or client mode to sucessfully connect to a A.P to make a sucessful link with A.P
@saad199551 thanks buddy the issue is slved now,, the problem was faulty adapter,,
i bought new one its working nice ever since,,
also the original adapter had no circuitry inside it i wonder how it worked it just had a transformer ,, it was shooting 12 volts at secondary,, and the wire was directly connected to it,,
poray adapter ma srf transformer tha,,, no circuit board nothing,, wonder how it worked for almost a year,,
hi i hve the same tp link router .. it has a problem all the 4 wan ports blink simultaneously even there is no connection on these ports.. i cant reset it .. i tried pressing the reset hole for 5 seconds. nothing .. happens...
also when i concect a cable to it and pc the pc shows as the cable unpluged i however the cable is 100 percent ok.. please help me.. thanks.. i tried connecting cable to all the possible ports at the back but none worked.. thanks. for any help..
This has been flagged as spam show
if 192.168.1.1 does not work for u then try with 192.168.0.1
silentmutilator 6 days ago
Brother can you tell me how to change the name of my tp link wifi modam
plz tell me i need you are help
ZALONEk1 2 weeks ago
Thanks u so much
rehmankhan888 3 weeks ago
good yar i configure it easily.
thanks
Khyberafridi1 4 weeks ago
This has been flagged as spam show
can any one tell me that how much minimum signal strength in db is required for a tp link WA501G in station or client mode to sucessfully connect to a A.P to make a sucessful link with A.P
theSharu999 1 month ago
This Router can't even port forward
Raytious20 1 month ago
@Raytious20 a noob certainly can't
but it DOES
dadvoc666 3 weeks ago
@saad199551 thanks buddy the issue is slved now,, the problem was faulty adapter,,
i bought new one its working nice ever since,,
also the original adapter had no circuitry inside it i wonder how it worked it just had a transformer ,, it was shooting 12 volts at secondary,, and the wire was directly connected to it,,
poray adapter ma srf transformer tha,,, no circuit board nothing,, wonder how it worked for almost a year,,
Ahsan0Ullah0Burki 2 months ago
bro is there anyway to change router's mac?
guyzepo123 3 months ago
@guyzepo123 MAC cannot be changed of any device
licensed2rock 2 months ago
thanks man ur owsem
najamrazvi1 3 months ago
Brother I have TP-Link 3420 but i am unable to to connect it to PTCL Echolife HG 510a.Kindly guide me
alambkr 4 months ago
ahan its really worked thx :-)
Sahibzadax 5 months ago
my web page of this configuration is chinese!
xiakol666 6 months ago
May be hardware problem brother
azaannetwork 7 months ago
hi i hve the same tp link router .. it has a problem all the 4 wan ports blink simultaneously even there is no connection on these ports.. i cant reset it .. i tried pressing the reset hole for 5 seconds. nothing .. happens...
also when i concect a cable to it and pc the pc shows as the cable unpluged i however the cable is 100 percent ok.. please help me.. thanks.. i tried connecting cable to all the possible ports at the back but none worked.. thanks. for any help..
Ahsan0Ullah0Burki 7 months ago