This is interesting. Still sifting through the test. I know one thing. Make a few of these generation plates attach them to switches which are regulated by the engines RPM. The switches turn on and off as the RPM of the engine increases and decreases. Directly purportional which produces hydrogen in appropriate amounts to vaccum of the engine. Just a far fetched though? or not:) You hydrogen enthusiasts got me thinking hahah
I am using "Lye" and "distilled water". I was using "TAP" water but found that it was the cause of the muck that was forming in the cells. The tap water is cheep and the lye is also cheep and easy to use....The water does turn yellow ... after time but that is all.John. AArons
Maybe its time to cap the chamber and begin some quantitative studies using a bubbler system. That way you can chart your progress and map out what increases volumn per time, and what does not. This would stop you from gasing yourself as well.
I understand your statement... I have had a number of people asking that I measure the output but to me at this point ... the difference (out of output compared to the amount last) is all I need. I have to quantify this first.... (I do understand) John AArons
When I came across this configuration... all my ideas went down the tube... This cell is putting out so much Hydrogen gas that I can't even conduct a long enough test to satisfy my questions... John AArons
I was so into the test ... (and other projects) that I did not use a meter.... I know it was bad science but this AAron's Cell" with this configuration is so interesting that I was more in to seeing what was going on than setting up the meters... John AArons
That is so interesting.... I have noted that each time like you and haven't had time to investigate it. I would be interested in any ideas.... John AArons
- at the cathode (negatively charged electrode), hydrogen ions accept electrons in a reduction reaction that forms hydrogen gas.
- At the anode (positively charged electrode), hydroxide ions undergo an oxidation reaction and give up electrons to the anode to complete the circuit and form oxygen gas.
What if you disconnect the four negative and left the the row of them would it make produce less? and also what if you put the four positive in the middle and connect the negative around them? would that make a difference?
Your questions reflect all the new ideas that come into play with this new finding.... the problem is one man can not conduct all these tests by himself... and that is all there is here.... John AArons
Mr. Aarons, I appreciate your hard work. I watch your channel and progress daily. Please leave your fan running, or increase your ventilation. You are suffocating yourself. Keep up the great work! Thanks
Thanks... the "AAron's Cell" in this configuration puts out so much Hydrogen gas that I will have to figure out some new method of venting the gas. That is why the tests are so short...... John AArons
What would happen if you completely surrounded the positive plates with negative plates on all sides I wonder? That way you are still using 1/3 but under a different configuration. I wonder if that would effect the output?
I did a test ... close to that (one or two back) where I had two side plates... check it out.. I was thinking the same as you... I will make up a cell like that ... keep watching... John AArons
This is interesting. Still sifting through the test. I know one thing. Make a few of these generation plates attach them to switches which are regulated by the engines RPM. The switches turn on and off as the RPM of the engine increases and decreases. Directly purportional which produces hydrogen in appropriate amounts to vaccum of the engine. Just a far fetched though? or not:) You hydrogen enthusiasts got me thinking hahah
MMadmike 3 years ago
hey john i think i am ordering 15 plates tomorrow of you
pitbike2006 4 years ago
Welcome to my world... John AArons
johnaarons 4 years ago
lol sorry not today but i am geting the money today and i am puting it im my bank so it might be tomorrow
pitbike2006 4 years ago
Take your time.... enjoy life... John AArons
johnaarons 4 years ago
do the stainless steel plates on your site have all the holes and notches in them?
rewindyourpants 4 years ago
They are just plates... (no holes, no Notches)
John AArons
johnaarons 4 years ago
John.. an old question I'm sure... are you using electrolyte and why is the water staying so clean? Thanks... Mike/H2OD
AirGoMotor 4 years ago
I am using "Lye" and "distilled water". I was using "TAP" water but found that it was the cause of the muck that was forming in the cells. The tap water is cheep and the lye is also cheep and easy to use....The water does turn yellow ... after time but that is all.John. AArons
johnaarons 4 years ago
John Be careful, tape a nap. We would be crushed if you blew yourself up or got sick...
kevinfettig 4 years ago
Life is to short... John AArons
johnaarons 4 years ago
Maybe its time to cap the chamber and begin some quantitative studies using a bubbler system. That way you can chart your progress and map out what increases volumn per time, and what does not. This would stop you from gasing yourself as well.
Isbadd 4 years ago
I understand your statement... I have had a number of people asking that I measure the output but to me at this point ... the difference (out of output compared to the amount last) is all I need. I have to quantify this first.... (I do understand) John AArons
johnaarons 4 years ago
wat if you put the same config on the other side of the hydrogen producing plates
rewindyourpants 4 years ago
That is a great idea.... John AArons
johnaarons 4 years ago
Like you I can't get this off of my mind. I would like to bounce a couple thoughts off of you, please bear with me as I walk through it.
The ultimate goal is a strong reaction at neutral amps right?
The AAron cell operates similar to a lead acid battery replacing the lead with stainless steel and the acid with water correct?
If you can develope a 12V charge on the AAron cell the theory is this creates a neutral feild with the 12V battery. Am I on the right track?
Isbadd 4 years ago
When I came across this configuration... all my ideas went down the tube... This cell is putting out so much Hydrogen gas that I can't even conduct a long enough test to satisfy my questions... John AArons
johnaarons 4 years ago
John, is there a amp draw between the two differerant ways you hook it up?
im1vestr 4 years ago
I was so into the test ... (and other projects) that I did not use a meter.... I know it was bad science but this AAron's Cell" with this configuration is so interesting that I was more in to seeing what was going on than setting up the meters... John AArons
johnaarons 4 years ago
Good morning John,
Do you have a theory why only the 5 plates produce gas no matter which polarity they are?
Isbadd 4 years ago
That is so interesting.... I have noted that each time like you and haven't had time to investigate it. I would be interested in any ideas.... John AArons
johnaarons 4 years ago
Hi John,
I think I have the answear to this one...
- at the cathode (negatively charged electrode), hydrogen ions accept electrons in a reduction reaction that forms hydrogen gas.
- At the anode (positively charged electrode), hydroxide ions undergo an oxidation reaction and give up electrons to the anode to complete the circuit and form oxygen gas.
Good Work! Keep them coming.
pascal26in 4 years ago
Thanks ... John AArons
johnaarons 4 years ago
What if you disconnect the four negative and left the the row of them would it make produce less? and also what if you put the four positive in the middle and connect the negative around them? would that make a difference?
intwes 4 years ago
Your questions reflect all the new ideas that come into play with this new finding.... the problem is one man can not conduct all these tests by himself... and that is all there is here.... John AArons
johnaarons 4 years ago
Mr. Aarons, I appreciate your hard work. I watch your channel and progress daily. Please leave your fan running, or increase your ventilation. You are suffocating yourself. Keep up the great work! Thanks
AuntSue 4 years ago
Thanks... the "AAron's Cell" in this configuration puts out so much Hydrogen gas that I will have to figure out some new method of venting the gas. That is why the tests are so short...... John AArons
johnaarons 4 years ago
What would happen if you completely surrounded the positive plates with negative plates on all sides I wonder? That way you are still using 1/3 but under a different configuration. I wonder if that would effect the output?
Givy55 4 years ago
I did a test ... close to that (one or two back) where I had two side plates... check it out.. I was thinking the same as you... I will make up a cell like that ... keep watching... John AArons
johnaarons 4 years ago
Have you tried this same test without the neutral plate in place?
jameshamel 4 years ago
I will have to ....John AArons
johnaarons 4 years ago