How to fix a broken air compressor

[jeffssmart]

Another way to loosen a stuck bolt is to try to tighten it a little the loosen up...

[jeffssmart]

Was it the bearing or the brushes... Those are cheap... Like $25, and a new motor  $200+... You look like you have enough tools to take apart that old motor, nuggets be a good idea to open it up and look inside to see what the issue might have been so next time you save some green backs lol

[wb5mgr]

Very nice motor, much better than the one that came on it! I always replace motors I have to with ones that are rated for continuous duty cycle, which it appears you do too from the tag I saw. Its worth the extra cost IMHO

[ewtrone]

Looking forward to your air hose routing video you referred to in this vid. Interested in what you are using as that is my next garage project. Keep them coming. Best wishes.

[haymaker1776]

Your brain is your safety cage! Love It! A long time ago I had a customer buy a electric dryer from me. He said he'd take care of the install. No problem we loaded him up. Well, he forgot to unplug the pigtail before disconnecting it from the old dryer. Epic 'Safety Cage Failure.' It was lights out for him and a lawyer probably got a new warning label to come up with!

[kamatsupc200]

you should do some new vids with your hoe

[chevyvictor]

Cody. wen we put pulley& keyway back on shaft we use anti-seize compound paste. Makes it a breeze egtting back off again. You must trust Baldor motors, we have them here in NZ too on all our American Ward RDC Printing Machines so im familiar with them

[jgwoodworking]

OK so you goal is ti survive the rapture?

[wyattoneable]

Always a pleasure to stop by Cody. Thanks for taking the time to post.

[autobahn101driversed]

The small details do matter, that's for sure!

[lioctober]

cooooooool bro



[flhtcui2000]

Cool story of, Jesus Heals Jairus' Daughter (Mark 5:35-43) At church tonight the same story was talked about. Then I come home and watch you video and you are speaking of the same thing. I like the my brain is my safety cage, I am going to steal that one form you. :-)

Ed

[chevyvictor]

great storey yes. inspirational

[wingman115]

Great job! I'm glad it worked out.. Love the channel.

[scooter17568]

Very nice.

[SCJMO]

I love it when a plan comes together! I'm stoked to see your air line install and setup!

[CampfireTalk]

"my brain is my safety cage" : ) well said brother.

Success!

[SuperLittlebuddha]

good job cody!

[RESISTCONTROL2]

sweet

[TheAnonymousWon]

good job Cody.

[liwarider]

"My brain is my safety cage." Great philosophy. Great vid.

Thanks Cody.

[SensibleAdventures]

Nice video. I don't believe in God but I know a good fable when I see one. It is nice to see that you are getting the shop up and running.

[bulkleyda]

Great story about how Jesus cares about the little things!

[Downeast1100]

Team God & Cody 1, compressor 0 .......

[s1bur]

Superb, keep e'm coming.

[bigblockcutlass]

Five stars. Excellent vid.

[excxflyr]

good job, I really enjoy these kind of videos. glad you got it working.

[DCC350]

I love these kind of vids. keep it up brother!

[redneckrollercoast1]

i really like when you do these kind of videos. keep up the good vids and godbless!

[pr4runner]

I'm guessing PVC for the air lines. Great work Cody.

[mtnman4jesus]

Yes brother God does care about the little things.I was working on my nephews car today and was at the end of my ability to fix it.I asked God for help and the next thing we tried fixed it.Praise God for caring for the small things!

[iMatt65]

So happy to be getting frequently posted vids again. The stretch around Aug, Sept last year was tough!

[freakshow2000]

I dont really use a cage for my safety but the safety of anything in that belts reach when it comes apart.

[jrobnmr]

What type and brand of work gloves are you using?  And keep up the good work!

[SouthWestIron]

good deal, looks like a quality setup for air!

[Graveltrucking]

Glad the new electric motor solved the problem you are good to go for the next 10 years or more.

[bobaloosb]

Great Job! Love what you do...keep on keeping on.

[blessedcajun]

Great vid thanks Cody. Can't wait for the bible study.

[dizbuster30]

"My brain is my safety cage." LOL Love it. Words of wisdom.

[mysciencenow]

have you ever used a micro-blaster to break apart boulders... ?

[carolinaprepper]

really enjoyed the video and thanks

[acm1288]

Was that a benchmade 940? I have been looking to get a quality USA made knife and the 940 is at the top of my list.

[cokeman250]

Great little series thanks and God Bless

[OBXSOLWIND]

Glad to see you are up and running... I love me some Snap On tools...

[rchopp]

Nice job glad to see you got that done, I know how it is trying to work without air powered tools..

[letstalkdogs1]

Good Job!

[VwDrvFnd]

Did you try swapping the 240 polarity on the original motor?

I had the same problem with my IR compressor when I bought it it was hooked up wrong

And the motor would barly spin and made strange noises very similar to your original motor

Swapped the 240 polarity runs like a champ! Either way glad to see you got it running!

[RobsGurl93]

Way to spread God's word, while making a repair! Really enjoy your post.

[DeserveLiberty]

Bible lessons in an air compressor repair. I love it!

[jjsandersheli]

@MrMooseheadbeer So you couldn't just unsub and leave it at that! You had to insult someone that is trying to better the world with youtube videos. Next time do us all a favor and keep your option to yourself and let us enjoy. Thanks.

Sincerely,

The Rest Youtube

[MrMooseheadbeer]

@jjsandersheli The rest OF Youtube*

Knob.

[beachfiredude]

Good job

thanks

[BalGreene]

Nice extra editing Cody. Great to see the projects again.

[jabp03]

Great job sir! I'm looking forward to your air line video. I love to get new ideas from other people. Thanks

[mrman2525]

I am glad you share your faith and love of God even in simple things like repairs. Very cool, God Bless.

[xxbryan715xx]

please do a benchmade 940 review! i beg of you! please!!!!!

[donnya1000]

Did enjoy this. Always like to see projects turn out well. Also, very good way to teach...finding relationships in everyday activities and subject matter.

[MrDieselOnly]

Great work, Cody! Baldor does indeed make an outstanding motor.

[loubzac3]

great video. thanks for shareing your faith in Jesus. did you put any antsieze on that motor shaft ?

[ReliantJustUsProject]

Great job, as always! Thanks for sharing the knowledge.

[Jona7Fer]

Awesome Cody! love all your vids

[highcountrytimber]

Another A + video Brother. You know how to mix education with fun. Blessing to you and yours on the new adventure in life.

[BrownDogDuke]

Thanks for posting this.

[JohnDoe8384]

Cody, i have been looking to replace my old compressor and the big question i keep hearing is single stage or dual stage. Any input or opinions on the difference and advantages/disadvantages to either?

[ZS6JMP]

WOW now safety nazis have rolled in yet. Good job Cody

[1timby]

Could you have rebuilt the old motor?

Thanks for the vid

[Fastflyingpigs]

If the grid goes down will you operate on gen. or solar?

[BrewByU]

Great job, Cody!! Good as new! Very gratifying to fix it yourself isn't it!

[lonelymale86]

Awsome Job Cody , God Bless you and your family ,

[FRUNTCASTER]

Good vid Cody. . . It always feels good to make something work using ones own skill-set and ingenuity.