RC ADVENTURES - PT5 - AXIAL SCX10 HONCHO SCALE RC TRUCK KIT BUILD - CHASSIS SPEED BUILD

[patmaz1]

Hello Medics,i tryed to search on rcsparks but there are so many treads,can you tell wich hex drivers you are using in this video,i would like to get some like thoses with the 1/4 end to fit on my cordless screwdriver,i found only one set wich is backorder on eds r/c tools.com,is that the one you use?if not would you help me with a link or something please?

Thank you very much for helping me out.Im patmaz73 on your forum by the way...:-)

[sk8lakai1]

Hey man nice vid's. I live in calgary as well lol and I wondering if u can pm me I have a couple questions thanx

[BusinessAndPlayTime]

are you  sekking it

[BusinessAndPlayTime]

are you selling your truck maybe

[devan12100]

Think you could do a follow-up to the overkill build by doing a $250 budget build?? :) thanks!

[808CHEVYS]

Is that a allon wrench drill bit

[MrAwesome832]

to raise the height can u just get longer shocks or do u need a ms conversion kit?

[MrAwesome832]

@MrAwesome832 i mean mt lolol

[fordyrox]

Hey, do these things need a special rock crawler esc or will any esc work?

Thanks, Fordy

[renegadevampire]

@fordyrox I USE A TRAXXAS XL10 ESC BUT U CAN USE ANY ONE U WANT

[vidgaizzer]

Hi medic, nice vid, i'v seen a video where someone had a 12t motor and a 3 cell lipo in a Honcho, is fast motors ok for a Honcho's stock gearing.

[coonhunter540]

wat moter and esc r u using



[hiddenasskiker]

Hi Medic i have a question to lift this truck a bit and more articulation do u only change the suspension ??? becuse i will prolly buy this next month and want it to be as good as the Jeep wrangler crawler

[mrviz60]

i was wondering if you have to order all that extra stuff to build it or does it come with everything in the box please awnser i need to know fast

[airsoft948]

can i run a brushed rockcrawler motor in water or do i have to waterproof it please awensor this is urgent

[djmedic2008]

@airsoft948 you can run a brushed motor in water. Watch my video "Water Break In for RC Motor"

[airsoft948]

hey medic If I GET A NEW ESC FOR MY CRAWLER DO I NEED TO GET A NEW TRANSMITER AND RECIVER.

[djmedic2008]

@airsoft948 No, you should be ok :) 

[tekren6]

Have you ever had any problems with the driveshafts stretching apart? I've almost gone through 2 sets of shafts now. So, I'm looking at the Integy steel driveshafts. Have you seen them? Are they any good?

[VolvoAll3]

Heye, have a question fur u, is 259,99 an overprice for the RTR modd?

[thatkidsmokin]

hey medic, im gonna pick up a scx10 chassis with the drive lines tranny axles links and shocks for 180 think im overpaying?

[djmedic2008]

@thatkidsmokin nope.. sounds about right my friend.. within $20 or so...

[thatkidsmokin]

@djmedic2008 great the kid wanted 225 i wasnt doin that but i still didnt know if it was worth it for 180, got my comp rig squared away now its time to build a scaler and i didnt need the whole truck cuz chances were it needed to be all redone anyway lol.

[edslol1]

@thatkidsmokin i paid 180 for a complete dingo with out radio and transmitter it came with alum links integy 35t motor and tekin speed star esc

[dvonlangen]

If i get this kit and plan on using, traxxas xl-5 esc, 7 cell 8.4v battery, 27t motor, and possibly the three racing winch,traxxas 2075 servo, all into my 3 channel spektrum receiver do i need an external bec

[djmedic2008]

@dvonlangen Yup... get the castle esc.. its cheap and works great

[nickonfire700]

Where do you get the hex bits for that power screwdriver?

[TheLiftedRanger]

I wish my truck was this easy to work on

[rabfs]

the skiny wire from the esc conects to the servo?

sorry about this question but im new in the electronics part and i don't know if i had to buy something else beside the motor, the servo, the esc, and the battery.

[djmedic2008]

@rabfs The skinny wire will go to your receiver... into the throttle port :)

[thehellfan13]

nice tattoo lol

[MadCrawlers]

do you reckon for what it is worth, getting a RTR & just replacing All the bits? I found it to be cheaper because there is a few things that I want to keep stock on the RTR honcho

[simulation17]

what about the chip and eletrics?

[PickleDyl101]

how long did that actually take u to do that?

[djmedic2008]

@PickleDyl101 about 20 minutes my friend :)

[rclover99]

@djmedic2008 wow

[thesuperTFreviewer]

@djmedic2008 wow

[thesuperTFreviewer]

@djmedic2008 wow! and you did it quite well, unlike other people you did not make it so fast that we cant see

[gabe2304]

@djmedic2008 How long do you think it would take for someone with zero rc experience?

[MartyCortez]

when you got this part did you have a problem with the servo screw and arm hitting the frame cross member and causing it to bind ?... i had to notch the cross member out to work properly..

[skaterock1234]

how dod you get the allen key in the screw driver?

[Twardy2]

All models you have Cool!

I'm interested in the final effect Honcho, and what colors will be painted!

Nice song!

Greetings Radek

[TachyonDriver]

...and no spare parts on the workbench!! LOL :)

Looking at the complexity of the kit, I can see why you've elected to do a speed build. She's gonna be rollin' soon!

AKA DIFFLOCK @ UKRCRC

[bigdog813]

where were you when i was building mine lol

[Arthaviolent]

waiting the first run bro... good job.

[dfawfzx]

Man i like these videos. Im dreaming of having such a studio setup and resources myself. way to go.

[dfawfzx]

is that a Tag Heuer? :-P

[djmedic2008]

@dfawfzx DJ MEDiC - ESQUIRE

[xXShadowRejectsXx]

medic since your building one of these you convinced me to save up for one! LOL i want a scaler sooo bad now, im no longer getting an e-revo! LOL i have my rustler's xl5 esc and reciever that are waterproof now and since i got a velineon system LOL so im gonna do a mud truck like yours! excpet maybe a tad bit diffent but i want one now! LOL keep it up medic!

[keith179150]

Hey thats alright my friend has a shirt with taco bell on the sleeve like that

[noremorse126]

i like the music you made , is it liketrance, or more electro?

[keith179150]

haha nice tat

lol ups store shirt!

[djmedic2008]

@keith179150 Dang it! lol.. its actually a KARZ RC club shirt.. they are sponsored by the UPS store... I knew that was gunna come up when I saw it in the vid...Lol

[JOHNDEEBANK]

I cant get my comments to load. Sorry friend.

John, Guelph. Ont.

[djmedic2008]

@JOHNDEEBANK its ok buddy... I know how ya feel, and it s a pleasure bro... gettin' close now!

[1967mustang123]

lookin good!

[beastly239]

next time you do a speed build, you should totally have Yakety Sax for the music!!

[djmedic2008]

@beastly239 lol...because I'm a Youtube partner, all music I use has to be designed and produced by me. I have to own all permission, distribution and copy rights to 100% of the content that appears in my vids!

[RClimits]

@djmedic2008 REALLY?? thats sucks! so like where did you get this music?

[MadCrawlers]

@djmedic2008 thats crap...

[inspktr51]

nice job medic. this is a good video for some of us who have a little bet more understanding about how things work. and saves some time too you know!

I would like to see this truck finished

[jauchiu]

So what type of plane is this? LOL

[2008calander]

I to enjey the previous show format with basic descriptions, high lights and lows. Please don't do this again. I just fast forwarded to the end. Still looking forward to the finish of the build. Thanks

[djmedic2008]

@2008calander its a balance between folks that like the old format and folks that like a speed build. Can't please em all - so I do both formats

[truedeadman]

Nice video, but i would have preferred a bit of description as to what was going on as far as component install. As someone who has never built one of these types of vehicles, it would be helpful to know what is happening.

[djmedic2008]

@truedeadman then I would suggest watching the first 4 parts ;)

[truedeadman]

@djmedic2008 I have been watching long as you have posted vids. It would still be nice to know what is happening i this step of the build. It looked like there were some issues, although that could just be due to the high speed of the clip.

[SmallDragon76]

Nice SpeedBuild ;-)

But why didn't you use a 5mm hexwrench for the nuts? Would be beter to handle than pliers.

[djmedic2008]

@SmallDragon76 Thank you - because the area inside the chassis would not allow for a wrench

[GetBlitzified]

Awesome! Keep up the amazing work!  cant wait to see this machine in action!

[RCNEWStv]

Another awesome vid, great work!

[hotrod5670]

nice

[STdemoniac]

first viewer !!! nice buil mate, i would see in action it !!!!