Mini Chopper Upgrade

[crazybroandco]

your cables are close to the ground you chump

[Alexpelon103]

you should put a 6.5 hp grey hound engine from harbor frieght

[AchillesMetalManiac]

dude is it too defficult to set up a Chopper?

[craigholmes83]

very cool. i have a very simular frame that i pulled the briggs out and slid in a 72 suzuki TS250 motor in its place and turned it to a soft tail

[roro879]

Dude,that bwould be so intense with a 16 horse,v-twin briggs engine,with some sheet metal work,and some chroming,it would look just loki a little harley!Awesome work.....

[kelly497]

where did u get the rear axle

[mowerwizerd]

nice welds!

[screamoISawsum]

ohh gayy i was gonna ask for tha plans ima makin one with a 4 Hp motor lol its gonna be awsum

[ISACKJ73]

@screamoISawsum where are you getting the metal for the frame?

[evinsteven13]

awesome!! you should put a bigger engine on it

[smashed390]

10 out of 10 the bike looks awesome

[intupspaturken]

i wish i had the equipment to make my own style great work

[hhcy3617]

the drag bars look a LOT BETTER & WITHOUT THE SISSY BAR AND CHANGE THE SEAT

[dennis6868]

man you are so cool that bike is awsome great idea to put it on video so we could all see your amazing talent you are a insperation to us all it must have cost a fortune to build that cool bike are you going to enter it in any world shows man you should have your own TV show im not gay but i would do you if i could

[keanoscarermitano619]

Old school choppa there mate.

[smallenginemods]

holy crape dude thats super sweet, you should put like a 24 hp v-twin motor on it and a big wheelie bar

[christophersboy]

GOOD JOB GUY!!

[HenriEstonian]

what name you gonna but on she?

[kjs12224]

take the sissy bar off and put the drag bars on it then it will be perfect

[BioHazardEnergy]

nice!

[camdan492]

where can you get those fat ass wheels?

[yakky44]

lawn mower

[10paperplane]

where did you get the engien?

[lleo108]

im serioulsy thinking about making one of these and just wanted to know how difficult it is. i got some mechanical knowladge but not heaps, would i be able 2 build it ???

[cfreddd]

No plans, I made it up as I was building it.

[Vegito545]

@cfreddd  but wheres the seat

[brent250kart]

were did you get the plans to build this from?

[crosbykicksbutt]

at first it looked like it got hit by a truck

[SPOOKSTR]

Throw a Honda RS 125 GP engine into it man.....170mph.

[reap62]

tht old tire was a fail

[cfreddd]

waste not. want not i always say.......

[pigswillfly123]

i like the idea of recycling things to make stuff like this

[dmcbyvictor]

looks awesome!so its more of like a recycling thing, u should add a NOS tank and flaming phoenix for the paint job, it should look kickass!

[cfreddd]

frame is made from plumbing pipe an the forks and neck are from a bicycle. i extended the front tubes. it goes35 mph.

[ericstinemire]

what did you use for the frame and fork and how fast does it go????????

[GTALorenzo]

so freaking ugly , put on a bigger engine , thats much better

[piperelking]

Can you say to me where I can obtain other one?

[piperelking]

The engine, where have extracted it?

soz , i'm spain ;)

[cfreddd]

it came out of an old mini bike i had laying around. 5 horse power briggs and stratton engine.

[piperelking]

The engine, where from you have extracted it?

[Nightster4one]

Take your handle bars off of the goose neck ,the turn the goose neck 180 degrees and put your handlebars back on,it will look less like a bicycle up front

[emmmy808]

Ill buy it!

[daddyd852]

looked cool till that FAG seat went on!

[lukykLc]

good chopper

[cfreddd]

yes it is up and running. search my i.d. (cfreddd) and you can see all of my video's. theres a new one up about my '72 CL 350 honda rat/bobber bike i built from scratch. i think you will like it. thanks for viewing.

[capedium01]

have you put the paint vid up yet?

[StrangebyDefault]

that is pretty awesome!

[cfreddd]

i'd say you have a bad clutch.

[scottlowe123]

i agree my lil snap on midi moto need clutch but it ended up to be spring in the clutch

[skyliner33wpn]

NICEE(y)(y)

UMM CAN I ASK YOU SOME THING

:: I GOT A CHOPPER LIKE THAT KINDA AND ITS A PULL START AND WHEN ITS ON I REVV IT AND THE COPPER DOESNT GO NO WHERE DO YOU THINK ITS GOT SOME THING TO DO WITH THE GEAR BOX ??

[originalcanada]

it goes nowhere because its in neutral try shifting it up into first

[skyliner33wpn]

LOL na i worked it ouy got my unle down to chek it and some thing wrong wih the clutch

[rastamanmiller]

AND UGLY

[rastamanmiller]

ha ha thats shit !!!!!!

[biciusggg]

muy buena moto 10 puntos .saludos desde argentina

[cfreddd]

zzzzzzzzzzzzzzzzzz............­..

[josh126007]

well if i think your gay u must have boned my mom to...and if you did good for you my mom is 40 and probly has a pusy that looks the a used up wet rag.good 4 u!!!

[cfreddd]

thank you malcolm. i have finally repainted it. i did it all in flat black. i also removed the sissy bar and put a different set of handlebars on it. looks great! thanks for viewing the clip.

[madmal77]

Nice video clip and bike, from Malcolm in little old New Zealand. :)

[cfreddd]

you mean where is the mini chopper or where was i when i rode it? its with me and has been painted. i was living in virginia when i made the slide show.

[bestamerica]

where is the ride

[cfreddd]

your mama didn't think so when I boned her. go play with your toys little boy.

[hitlersbestfriend]

ur GAY

[cfreddd]

It's a 5 hp briggs engine. I made a intake manifold for it and mounted a carb. from a Tecumseh engine on it. That type of carb. uses a float bowl so a remote gas tank can be used. Thanks for looking at the video.

[jylt2008]

okHey what kind of engine do you have on the Chopper is it a Briggs and Stratton if so how did you mount the engine without the gastank right next to it because the carborator on top of the gas tank I am just wondering how you mounted it with out gas tank next to it

[sausageslaps]

i built more or less the same kind of chopper, but i used a minitrailer fat tire, try it out, it has a better look and is a road rated tire

[79Harley91]

when is the trike video going to be done

[cfreddd]

i just moved to a new state, gonna be awhile. thanks for the interest.

[Brotherbe]

Hey what kind of engine do you have on the Chopper is it a Briggs and Stratton if so how did you mount the engine without the gastank right next to it because the carborator on top of the gas tank I am just wondering how you mounted it with out gas tank next to it

[cfreddd]

its a 5 hp briggs. i made a intake manifold for it so i could run a different carb. on it. the sportster gas tank is functional. did this to make the chopper more realistic. hope this helps you. thanks for the comment.

[superfunnyman123]

needs a v twin lol:P

[kingofwhips5]

cool lol me and my dad made one but had no motor LOL! :P

[Emzieroy]

awesome bike but one problem...umm need a bigger engine to fill that thing in

[cfreddd]

yeah i know.... i have a ten horse brigs to go on it just havent had time to mess with it. one of these days i will. thanks for the comment.

[Emzieroy]

yeah thats awesome after u get it done id pay about 100-200 for a custom paint job and think about how much u cud make or u could just keep it for memorys and tel ur kids about it

[Emzieroy]

hey can ya make me one

[buddyhasafamily]

thats pretty sweet!

[cfreddd]

Thanks! I'm in the middle of moving to another state so it will be awhile before I paint it. I'll prolly put a small motorcycle engine on it. I need more power. We intend to use it at motorcycle rallies and stuff.

[1skiinIan]

those changes where really worth it. nice job

[atverdude]

can u send me plans

[mathew0m2]

It looks so much better with the new rear !!

[XmetalrockerdudeX]

wow nice job.