Walkera Dragonfly CB-180D Super Stable Fixed Pitch RC HELI

[chijochijo]

Will i be able to fly this thing? I've flown some real nub 2Ch heli's, havent flown a coaxial yet, ..

If so, what would u recomend me, this one or the (3ch) Double horse 9104?

Which one is the easiest to fly?

Thx!

[TheDownloadCity22]

the robbe arrow plus is the same helicopter and much better

[matthijs808]

Xheli, I've got mine for 1.5 months or so but i crased it a little time ago got the replacement parts and put them on but its like is going way slower forward an backward then before and i cheked the servo but it looks fine, what to do?

[shiny549560]

nice little heli

[ccfook2123]

my cb180d has no forward flight!

anyway i can mod it to make it fly faster?

[gda882002]

VERY SWEET LOOKING HELI

[AddictedtoAviation]

Could a helicopter like this take up one of the mini cameras? Or does it need to be bigger or a nitro?

[galen696969]

How does this helicopter compare to the MadHawk 300?

[bluehazer]

@galen696969 Same thing. Different packaging, that's all.

[kikKillerr]

подарите мне такой!!!!!!!!!!!!!!!!

[Hokexobe]

@shiroblack No, fixed pitch heli's can't fly upside down. If you do want to fly upside down you should consider buying a collective pitch helicopter, althou they are more expensive and alot harder to fly so i recommend you'd buy a fixed pitch heli first and learn to fly properly with that one first. Goodluck!

[Shiroblack]

can it fly upside-down?

[scoutandroid]

do you think this heli is good for beginners like me who want to level up to intermediate? cause this heli looks cool and i want a single rotor because the co-axials kinda look ugly with another blade on top of the other blade

[xhelicopter]

@scoutandroid This would be a great addition if you are moving away from coaxials

[MattOost]

@scoutandroid

If I were you I'd take the new Uflys (3-axis gyro). Very stable and much more durable than the CB180D. I've had the CB180D and had a lot of fun with it. If you do want one, I'd take the CB180Z; it's brushless and has a CP tailrotor...

Good luck.

Matt.

[scoutandroid]

will it charge up to full for just 20+ minutes?

[scoutandroid]

how much time does this heli need to fully charge?

[xhelicopter]

@scoutandroid with the stock charger, it can take around 20+mins

[xhelicopter]

@scoutandroid with the stock charger it can take up to 1hr

[bigpappageorgio]

Been into modeling for a long time. The rudder control on helicopters are normally very sensitive. I might replace the shaft motor with the "aft tail boom mounted motor" upgrade. Another youtuber posted his videos and reportedly makes the CB-180D a much better flyer. Another way, more difficult, is replacing the radio equipment with one that has better mixing sensitivity. Note: this could be a system fluke, requiring a return, seek a expert flyer's help from a local hobby for advice.

[Mejito808]

You guys should carry some blade helis. I'm sure a lot of people would like to buy the blade mcx2.

[3255959]

3255959 Good stuff,Does anyone know if new exceed madhawk 2.4 trans with display binds with this walkera 180 d?..i found a new walkera 180d cheap but its a bind and fly..

[oswaldofany]

mine came with a nice transmiter now i can fly my helis and air planes with the same transmiter (2.4)

[OnurBaba5834]

awesome

[420choky]

hopefully its stronger than the cb100 . i tore mine up 1st day hahah . now im harrasing everyone to help me fix it .. i never fixed a main shaft and stuff . this one i will use the simulator and leave in the box until i fix the cb100 . hopefully i can send it in and have it repaired . this hobby is fun ..

[bluehazer]

When Walkera develops this into collective pitch? They will own the market COLD.

[ROTORNUT007]

they already hav colective pitch see the creata 400

[bluehazer]

@ROTORNUT007 Nope. The Creata is Hiller-controlled, not Bell like the CB180 is.

[bigpappageorgio]

Very nice heli but, umm, Out of stock Xheli.

[xhelicopter]

We get new shipments every 4-6 weeks. Check back in soon!

[3255959]

@bigpappageorgio .. Thanks..I finally asked someone that new what they were alking about Rick from Clubheli explained how to adjust gain screw..very simple the screw has a flat spot on top..the adjustment is from 9 Oclock to 3 Oclock ..this screw will turn forever in either direction...Why don't instruction show this? i have asked several people that own this copter and they were clueless on how to adjust gain properly..now i'm waiting on a main gear..

[bigpappageorgio]

@3255959 See video "Upgraded Tail Motor assemply", kind dumb name for a CB-180D video, but it is indeed the tail motor mod video for the helicopter (if interested). FYI

[sgtsn1per]

can som1 tell me if this is bigger then the 3ch ah-64 apache co-axiel?

[bluehazer]

Nose-to-tail, 16.5". Rotorspan, 17". Hope that helps.

[NOMADxSOULS]

@sgtsn1per

can you read?

[bluehazer]

Superb helicopter. I'm attempting to wear mine out. Very stable, crisp, and fun!

[bluehazer]

23 flights, 2 crashes, and no damage!

[xhelicopter]

Nice!

[anlay]

good heli,beginner,easy control.

[ultragroove1]

when will x heli have spare parts for it?

[YourFriendlyMe]

is it 6ch or 4ch

[videoguy837]

It is 4ch fixed pitch heli. The heli has two brushed motors. The tail motor actually sits in the main body of the heli and drives the tail rotor through a torque tube.

[speedstakerguy]

It's called a Shaft Drive tail rotor