I want to know if I need some special bracket behind the mobo in order to install a push pin cooler
I also want to know if I already had a bracket behind my mobo, will I still be able to install a push pin or I have to remove that bracket first to install the push pin cooler?
How much clearance do you have for the heatsink? I'm hoping at least 8mm 'cause I'm getting a NH-U12P SE1366 with this case, so I'm hoping it'll fit. :)
There is no room for the fan with four hard drives and their cables. And I read that you don't need the fan because power supply can take all the hot air out from the lower part of the case
How did you get that HD LED hooked up? I have an EVGA 750i FTW in mine and no matter how I hook the thing up I can't get the LED for the hard drive to come on.
the guy has the world trade center of heatsinks on his motherboard
mccclarren 3 months ago
1:53, don't be so rough on that Ninja!
Chargeglass 1 year ago
can you mount a scythe ninja 2 on the p5q deluxe?
BlazE3103 1 year ago
looks nice
Gecataaa94 1 year ago
u broke the cpu cooler D:~!!!!!!!!!!!!!!!!
using192 1 year ago
that heat sink looks extremly heavy
kennyhliu 1 year ago
hi, I need ur help
I want to know if I need some special bracket behind the mobo in order to install a push pin cooler
I also want to know if I already had a bracket behind my mobo, will I still be able to install a push pin or I have to remove that bracket first to install the push pin cooler?
JuicyFruitSweeT90 1 year ago
@JuicyFruitSweeT90 well if u use a regular push pin u dont need a back plate and if u do one with screws u geth the brackets at the cpu cooler.
and yes u can use still the pushpin then buth the bracket haves to be removed
using192 1 year ago
This has been flagged as spam show
Just wondering how quiet the psu is? Planning on getting one myself. Thanks
MrRittzy 1 year ago
Just wondering how quiet the psu is? Planning on getting one myself. Thanks
MrRittzy 1 year ago
Holly crap have a CPU cooling tower
1:30
xXBornToGameXx 1 year ago
does that board still work? it looked like you just had it laying on the table without any static protection
hulch 1 year ago
the point with this case is the optimal cabelmanagement, think u have miss that
fartofrail 2 years ago 8
@fartofrail Yeah, very easy to keep everything neat and tidy, have built a few computers with this case :)
psycommando 1 year ago
the inside top of that case just screams for a new hole and a 120.3 rad installed.
simonshusse 2 years ago
Iv got to say legendary lighting camera work and yeah good sounds
DarkGodV 2 years ago
AMAZING!!!! me like
roskai 2 years ago
Is the motherboard Asus P5Q Deluxe stable and Compatible with hardware???
Do you have to trust the Qualified vendor list for choosing RAM???
I ask theses questions because I want to be sure that this motherboard is "rock solid" and I am planning to buy it.
EuropeanPL 2 years ago
same ram as me .. it sux
i boght the 1066 mhz version cant get over 800 mhz
vinny4punt0 2 years ago
I have built 3 systems with this same case and they all have a lot better cable management
photographylover246 2 years ago
I have built 3 computer using this case!
photographylover246 2 years ago
whoa im really liking ur heatsink 12 heatpipes. what is it ?
plutomok 2 years ago
Wher Graphics Card ?
Votus91 2 years ago
great work, beautiful computer
DeutscherRitterorden 2 years ago
How much clearance do you have for the heatsink? I'm hoping at least 8mm 'cause I'm getting a NH-U12P SE1366 with this case, so I'm hoping it'll fit. :)
AlephHaz 2 years ago
Wow!
That's no moon...it's a space station!
Music is quite fitting to show off that monster rig.
irpacynot 2 years ago
You could probably set burning charcoals next to your CPU and it would not heat up thanks to that heatsink...lol
JetpackSniper08 2 years ago
yup that mugen thing is really really tall !!!
and yes porn music ! :D
b0ss6769 2 years ago
nice video m8..
ilibasic 3 years ago
DANG! That heatsink is MASSIVE!
DirtyDanny95 3 years ago 14
aika hieno =D olen miettinyt tietokoneen kasausta. toimisko tällä kokoonpanolla??
phenom 9650
k9n -cf
4 gb 1066 mhz
ati hd 4850
joku 250 gb sata kovo
ja axp 630w 2.2 sli ready ( riittääkö toi)
Kiitos!
arvasin1 3 years ago
I would like to see the full specs of this build.
duncan345 3 years ago
That CPU cooler is ridiculous!
Branhower1 3 years ago
Yeah that thing is naughty... wonder what's under it.
duncan345 3 years ago
It's not the SATA cables but the power cables are way too thick to fit there with the fan ;)
samSonic79 3 years ago
There is no room for the fan with four hard drives and their cables. And I read that you don't need the fan because power supply can take all the hot air out from the lower part of the case
samSonic79 3 years ago
@samSonic79 not at all times.
the psu in this video pulls the cold air towards the inside of the case.
you'll still need an exhaust fan to help the circulation
taejamhaha 5 months ago
they have back-plates and motherboard pcb's are stonger than you'd think. A single pci-e 2.0 slot on my mobo holds up an almost 5lb 9800gx2.
erictech603 3 years ago
is the scythe fanless??
yourmotheris69 3 years ago
I use one fan at the scythe and one fan in the upper part of the case.
samSonic79 3 years ago
you should get 2 gx280
fresno93703 3 years ago
holy *bleep* thats a huge heatsink btw thats a nice pc can i have it :S
Omellykim 3 years ago
How did you get that HD LED hooked up? I have an EVGA 750i FTW in mine and no matter how I hook the thing up I can't get the LED for the hard drive to come on.
Shintsu2 3 years ago
that is a beassssst of a heatsync.... is that what it is :D its like a building
TeamXorcist 3 years ago
beauty
kiloah92 3 years ago
realy nice video. thanks for this :D
anyone know if a 4870 X2 Gcard can fit into this case? thanks!
Froggie567 3 years ago
this case clearly fits 4870x2, look how much space there is after the mobo ends where the pcie slot is
kiloah92 3 years ago
Great video! good choice of music.
A350cid 3 years ago
Nice vídeo i have the same case and I am so happy with the case.
josedocpt 3 years ago