How do you change the difficulty settings or make the plane start cold and dark because when I go onto the configurator and change the settings it has no affect and the settings won't change
@DTl315 There are two dif configuration managers. One can be found under the aircraft menu in fs2004 while you are in the plane. The other can be found in the start menu. You may also need to find FSUIPC as well. I dont have it and both managers still work
@olopolo when i start up FS9 my heading speed and altitude are always three line (---) and a dot and I cant change please help I have been trying for 8 months now
@thehazzer09 Hello) Buttons under Speed, Heading and Altitude has 2 states (2 positins) If they pressed (down) plane controls by FMS, BUT if they unpressed (pulled up) plane controls by pilot and you can see actual speed, heading and altitude. By default Wlco craft has PRESSED buttons! ))))) So, to pull up these three buttons you must click on it by RIGHT mouse button!)))
Hi! Nice tutorial but i have a problem... :P When i take off i turn on the autopilot and the autothrottle... but the aircraft always overspeeds... i set the speed at 250 but every time it overspeeds... Can you help me please???? Reply!! :D :D
Hi, i barely purchase the vol 2 of this. and in the cockpit on the panels all i get is an error message, i cant even see the altimeter, the engines screen etc. any help?
When I loaded Wilco Airbus ver1, it was cold and dark....however, there was nothing I could do to give her power. The first thing he needs is battery power right?...Well in my case thats impossible. When I click either Battery 1 or 2 on they spam on and off , nothing is happening and i am getting a only a buzz sound . pls help
However I really dont get the FMC stuff. I load FMC with the same flightplan as ive choosen with fsx flighplanner and still i always end up like 2 continents from the planned airport (a bit exeggerated), what am i doing wrong?
Am i only supposed to use the FMC in the airbus to gett it right?, beacuse i know that using only the fsx flightplanner doesnot work.
when I start my Wilco A320 I have all instruments on dark, only standby instruments are working and the engines are running, all so all lights are working. But the rest is dark. Have you heard about this issue? And can you help me? Best regards
@flobber777 Check shift 4 , OH panel , check if both batteries are on ,check external power if availaible ,or start APU . Maybe you already all know about . In this case , it might come from the program itself .Then , uninstall and re - install ...In my case , I came across huge bugs with my FSX Wilco Airbus 320 series . In about 2 years , did uninstall and re - install nearly 10 times !!
@flobber777 Open OH panel , shift 4 , check if both batteries are on , external power if availaible , on , or start APU .All glass cockpit will light on , even if engines are not started yet .Maybe you already know all about . In this case , it comes from program itself . " Wilco touch " ! Uninstall and re - install , like I did , nearly 10 times those last 2 years.... Huge bugs , works a while , and suddenly , nightmare . ( FSX version ) Otherwise , it ' s pleasant to fly !
@katowsky Thanks alot. I will give it a try. I have placed an order for the Aerosoft Airbus X, so I don't want to spent that much time on the Wilco at all. But thanks a lot for your answer!
@flobber777 Well ,I got it too , Airbus X , maybe my computer is sick , but I had at once many bugs .Extremely sensitive on stick ,wingview floating meters away from the plane itself , mouse scrolling inoperate , which make the all thing out of use !!
@katowsky hmm, well I only heard positive things, I was able to test the beta version and it didn't have all of these bugs. The handling of the aircraft was not that god if you had the ELAC turned on but it was only beta version so as I read should this bug have become fixed.
But it's all so good to hear the other site of the Airbus X.
Please help!!!! When I install this add-on, I go to the FSX menu and when I choose my aircraft from this the airbus series volume one collection, it asks me if I want to run or don't run. When I click run, FSX automatically shuts down! When I click don't run, all of the cockpit screens don't show up with anything! any ideas?
@UltimateSonicFan0001 thanks for replying, I actually just found out what was wrong. The graphics settings don't need to be turned down though because I have a very fast computer. To make it work, I had to right click on the icon and click run as administrator.
Can someone tell me how to use the heading knob to turn the plane when autopilot is on. When I get to the end of my STAR, I cannot turn right or left using the heading???:/
Hey how do i use the heading on the a330/a340. Because everytime i click it it pushes down and i have to look on the nav to see the heading, also how do i use the ap to control heading? Thanks
one question: how do i know the departure and the landing runway, without ATC instructions? it's because fmgc is configured before starting the flight; on boarding
im coming from Air Simmer a320 and a bit of real life, you dont have APU on at any gate otherwise it would be noisey as hell as everyone noes APU is a small engine type at the back, i'm not sure if wilco has EXT POWER but thats what is used in real world and the other addons im familier with
@HeathrowSpottingHD it does have the EXT. Power button as well as the APU, but the APU is used at smaller airports where EXT. Power isn't availible or there isn't a ground start cart
hey hab ne frage: ich geh in config progamm dann auf configuration und drück auf cold and dark dann starte ich den flug und es is net in cold and dark. es steht: dass ich mit parkbremse den flug starten muss.....aber wie? bitte antworte , wäre sehr dankbar......
question! after all star and everything I have the plane good all the surfaces moves great but as soon as I do the take off I can turn left or right I mean not bank for me I have rudder and and roll but not bank does someone knows why?
hi i just got this product i want to put in a heading and spped in the panel near the altitude bit but all there is is 3 lines what do i do so that i can put in a spped and heading ta
i jost got the a330 china airlines livery but im not use to the panel i cant find the GPS/NAV button like on the a321 panel and other stuff that i dont get
@olopolo I Have This Wilco Airbus, But How Do I Set The Autothrottle, Because I Right Click It, SEt The Speed, then What Because It Does Not Stay At The Speed?>
okay i have both wilco airbus vol.1,2 but the heading and speed and ias/mach these autopilot stuff are empty which means i cant find numbers there , so how can i get back these numbers , guys pls. help me , i will be very thankfull.
the airvus aircrafts use a turn push and pull technique on the FCU so in order to simulate that on the wilco series left click the knob then right click then you will see the FCU allowing you to adjust the speed and heading .
question! after all star and everything I have the plane good all the surfaces moves great but as soon as I do the take off I can turn left or right I mean not bank for me I have rudder and and roll but not bank does someone knows why?
I have donne ev´rything that is writeen in wilco page but i still cant do it. I install it as administration and I can call the airbus into the game. but when i insert the departer/arrivel aeroport in the FMc it just crash on desktop. I have already delected th FMC Paste,as wilco said, but it was useful. Please help me :(
Specs is what hardware you have brought to your computer. Processor, graficcard and so on..
I can't really see, what is wrong and I don't know how to fix your problem. Maybe you could go to Wilcos webpage and go to their support page and ask them what is wrong in a mail or something.
One thing you could do is to upload a video showing your problem. I don't think you can do anything better than that - sorry :(..
Hey captian, why am i not able to bank the aircraft? Its only going straight, up and down, but not right or left when airborne. Any solutions for this?
Hi everyone! I've got 3 main questions about Wilco Airbus Vol2.
1. How do you open the cargo doors?
default sim it's "ctrl + e + 2,3" but It doesn't seem to work here!
2. Still have no clue how to get inside the cabin with the passengers view!
3. when in 2D cockpit mode I can see nice drops of rain on the windshield. i guess It's custom made by Wilco! But they don't seem to apper In 3D Cockpit?! Does everyone experience this? is there a way to fix it? Because I think i've seen It work!
if u dont see and wingviews you can add some..just go to the default plane that has them..then go the cfg file of the plane and find something called camera positon and next to it a whole bunch of numbers..if you found the one you want just copy it and paste it in the right section of the planes cfg that u want the view to be in!!
Please someone help me fix this problem! Everytime i start up my Wilco Airbus volume 1 & volume 2, my MFD stopped working! Even when i set up everything from Cold & Dark! The MFD is black and everything inside is lined red. The MFD says "Map Not Available". Any ideas?? please someone help me!
you have to align your irs, in the fmdc or whatever it's called enter the airports your going to to from, it doesn't mater if your not flying to those airports, then "align IRS" will show up in orange click it and by default it will take 60 seconds
Plz help, i bought my Airbus series Vol 2, i installed according to the manual, but when i start it on FSX, it makes 2 'beeps' and closes FSX. If you know how to get it to work, PLEASE PLEASE HELP! Tell me ANY solutions PLEASE. I'll appreciate all the help.
are you using vista or xp this problem uesally happens on vista o.s if your using vista make sure your using administrator not guest if still not working go to control panel user turn off auto updates it should work or you can go to Wilco web site they have forums there
thanks for the help.. im waiting for my software wilco airbus vol 1 to arrive soon...and i know this will be a big help for newbe like me...have to start yet Airbuses..currently flying Wilco B737
how do u set this up cuz when i load up the plane my thing crashes i found out its to do with the A320CFM_FeelThere how can i fix the beeps and crashes
It might not work to put the panel of Wilco to a CLS you can try copy paste the panel folder from the Wilco to the CLS folder replace it see if it works if it works you would not have VC
copy the AIR file from your wilco and put it in the cls folder, rename the wilco one to what the CLS one was, Then take the 'contact point' section out of your CLS aircraft CFG and keep them safe, delete your CLS aircraft cfg and copy the wilco aircraft CFG in, then copy the CLS contact points you saved earlier over the wilco point (otherwise
Nice video! Are you from Germany or a German speaking country ( Austria, Germany Switzerland?)
aaronrodgers77 6 days ago
How do you change the difficulty settings or make the plane start cold and dark because when I go onto the configurator and change the settings it has no affect and the settings won't change
DTl315 4 weeks ago
@DTl315 There are two dif configuration managers. One can be found under the aircraft menu in fs2004 while you are in the plane. The other can be found in the start menu. You may also need to find FSUIPC as well. I dont have it and both managers still work
lowe442 1 week ago
may wilco A320 wont turn either left or right is that because i used keyboard only?
grvc44 1 month ago
how i open all the doors service,baggage,etc.. and the FMC...
EuropaUX 1 month ago
Nice, but my problem is there are no numbers on speed at my autopilot....
MrTunisair 2 months ago
how you open baggage compartments ??? help pls :) nice vid
hgvwi 2 months ago
how do you get liveries , mine are only airbus house colours !!!! HELP !!!1
DaveSull1994 2 months ago
@DaveSull1994 try this: stevenairspace(dot)com/download/
look for the wilco downloads :)
qwe860 2 months ago
@DaveSull1994 on wilcopub.com
EuropaUX 1 month ago
@DaveSull1994 when you eneter wilcopub.com search for airbus vol.1 then scroll down when you see extras there
EuropaUX 1 month ago
hi, when i ils autoland with the a340 the plane goes below the glideslope. How can i fix this
bebetizo 3 months ago
Help my wilco a330 when it's fuel load 100% .. its only have like 77000kg help!
gocatchemnow 3 months ago
where's the part 2
robaaa1k1 4 months ago
@skaterkiviman Græla random at eg ser dine kommentarer på kver EINASTE video :P
TheTorri98 5 months ago
dude! for god sake please tell me how did get that emirates livery for a330.itz not yet published by wilco ...please
fgnhgn 9 months ago
@fgnhgn Dude, for no one's sake, go find it on flightsim or avsim, doesn't need to be on wilco's site.
MusicLover11325 6 months ago
hello, on an ILS approach the runway alignment is perfect but the glide slope isn't working, can you help me?
291774191 9 months ago
@olopolo when i start up FS9 my heading speed and altitude are always three line (---) and a dot and I cant change please help I have been trying for 8 months now
thehazzer09 10 months ago
@thehazzer09 Hello) Buttons under Speed, Heading and Altitude has 2 states (2 positins) If they pressed (down) plane controls by FMS, BUT if they unpressed (pulled up) plane controls by pilot and you can see actual speed, heading and altitude. By default Wlco craft has PRESSED buttons! ))))) So, to pull up these three buttons you must click on it by RIGHT mouse button!)))
slavamirin 9 months ago
with the a330 and a340 fmgc data base is there a way to change it or not
JACKO13100 10 months ago
hi! :) nice video, but how can i open the cargo doors? :P
themalevfun 10 months ago
In FS2004, does anyone know the Key assignment for the MRTT Drogue Chutes?? Appreciate any help if someone knows.
Wrahns 10 months ago
Hi! Nice tutorial but i have a problem... :P When i take off i turn on the autopilot and the autothrottle... but the aircraft always overspeeds... i set the speed at 250 but every time it overspeeds... Can you help me please???? Reply!! :D :D
Karxilas 11 months ago
And where is the part number 2???
Dmetrey437 1 year ago 2
How to make the plane following the route of fmc and maitain the altitude*
thales340 1 year ago
@Ijinan14 I beleive there is a wilco airbus in the selections? but I haven't updated mine in awhile
hope this helps
AFA7356 1 year ago
thanks man, but learn to say the S!! ;p
mjdronrijp 1 year ago
Hi, i barely purchase the vol 2 of this. and in the cockpit on the panels all i get is an error message, i cant even see the altimeter, the engines screen etc. any help?
XA395XA 1 year ago
When I loaded Wilco Airbus ver1, it was cold and dark....however, there was nothing I could do to give her power. The first thing he needs is battery power right?...Well in my case thats impossible. When I click either Battery 1 or 2 on they spam on and off , nothing is happening and i am getting a only a buzz sound . pls help
santhosh1979 1 year ago
Good tutorial but I think i'm going to have to give up on this can't even get basic functions to work properly lol
smonoco 1 year ago
Nice video!
However I really dont get the FMC stuff. I load FMC with the same flightplan as ive choosen with fsx flighplanner and still i always end up like 2 continents from the planned airport (a bit exeggerated), what am i doing wrong?
Am i only supposed to use the FMC in the airbus to gett it right?, beacuse i know that using only the fsx flightplanner doesnot work.
oherregud 1 year ago
Should i get this package or the airsimmer?
supersaintsfan31 1 year ago
When i saw the overhead panel i thought OMFG!. BTW how much is this Wilco A340 in UK Pounds?
GazzerHST 1 year ago
@GazzerHST I think it's about £20
FF35Pilot 1 year ago
@GazzerHST lol..... this is nothing compared to the boeing overhead.....
Dmetrey437 1 year ago
how do you get the plane to follow the pre-loaded gps route (the fsx route)??
ty
samm1551995 1 year ago
where is the gps....
huhshus 1 year ago
which AES did you use? do all the add-ons include the same thing?? PLEASE REPLY!!
Tariqsh14 1 year ago
Wow..yep I've been a Boeing driver for 9 years. Airbus is like night and day difference. :(
MrFlightGuy 1 year ago
@MrFlightGuy driver? no mate its pilot!
natofsx8 1 year ago
Hi! Very very thick accent ;). Can I ask where you are from originally? Good tutorial.
MrFlightGuy 1 year ago
Hi there,
when I start my Wilco A320 I have all instruments on dark, only standby instruments are working and the engines are running, all so all lights are working. But the rest is dark. Have you heard about this issue? And can you help me? Best regards
flobber777 1 year ago
@flobber777 Check shift 4 , OH panel , check if both batteries are on ,check external power if availaible ,or start APU . Maybe you already all know about . In this case , it might come from the program itself .Then , uninstall and re - install ...In my case , I came across huge bugs with my FSX Wilco Airbus 320 series . In about 2 years , did uninstall and re - install nearly 10 times !!
katowsky 1 year ago
@flobber777 Open OH panel , shift 4 , check if both batteries are on , external power if availaible , on , or start APU .All glass cockpit will light on , even if engines are not started yet .Maybe you already know all about . In this case , it comes from program itself . " Wilco touch " ! Uninstall and re - install , like I did , nearly 10 times those last 2 years.... Huge bugs , works a while , and suddenly , nightmare . ( FSX version ) Otherwise , it ' s pleasant to fly !
katowsky 1 year ago
@katowsky Thanks alot. I will give it a try. I have placed an order for the Aerosoft Airbus X, so I don't want to spent that much time on the Wilco at all. But thanks a lot for your answer!
Beside a great tutorial! Good job ;-)
flobber777 1 year ago
@flobber777 Well ,I got it too , Airbus X , maybe my computer is sick , but I had at once many bugs .Extremely sensitive on stick ,wingview floating meters away from the plane itself , mouse scrolling inoperate , which make the all thing out of use !!
katowsky 1 year ago
@katowsky hmm, well I only heard positive things, I was able to test the beta version and it didn't have all of these bugs. The handling of the aircraft was not that god if you had the ELAC turned on but it was only beta version so as I read should this bug have become fixed.
But it's all so good to hear the other site of the Airbus X.
flobber777 1 year ago
How you could run the SPD and HDG Airbus Series, because I can not do work.
MegaVITINHO100 1 year ago
how do u get emirates??? i cant find it any where???
StickMen2000 1 year ago
my navigation display doesnt show could u help
shura21321 1 year ago
Please help!!!! When I install this add-on, I go to the FSX menu and when I choose my aircraft from this the airbus series volume one collection, it asks me if I want to run or don't run. When I click run, FSX automatically shuts down! When I click don't run, all of the cockpit screens don't show up with anything! any ideas?
UltimateSonicFan0001 1 year ago
@UltimateSonicFan0001 reinstall the whole thing and also try turning down your graphics settings in FSX.
DrumGod22 1 year ago
@UltimateSonicFan0001 thanks for replying, I actually just found out what was wrong. The graphics settings don't need to be turned down though because I have a very fast computer. To make it work, I had to right click on the icon and click run as administrator.
UltimateSonicFan0001 1 year ago
does this come with its own callsigns?
JFMUFC26 1 year ago
Can someone tell me how to use the heading knob to turn the plane when autopilot is on. When I get to the end of my STAR, I cannot turn right or left using the heading???:/
kemkpo 1 year ago
@kemkpo you have to right click the middle so it is a number
JATO457 1 year ago
Hey how do i use the heading on the a330/a340. Because everytime i click it it pushes down and i have to look on the nav to see the heading, also how do i use the ap to control heading? Thanks
zSnoWMaYnE 1 year ago
one question: how do i know the departure and the landing runway, without ATC instructions? it's because fmgc is configured before starting the flight; on boarding
tvrua20 1 year ago
@tvrua20 use your own weather settings for your favorite airports and change them mid-flight, or just use weather and the map of the airport
JATO457 1 year ago
im coming from Air Simmer a320 and a bit of real life, you dont have APU on at any gate otherwise it would be noisey as hell as everyone noes APU is a small engine type at the back, i'm not sure if wilco has EXT POWER but thats what is used in real world and the other addons im familier with
HeathrowSpottingHD 1 year ago
@HeathrowSpottingHD it does have the EXT. Power button as well as the APU, but the APU is used at smaller airports where EXT. Power isn't availible or there isn't a ground start cart
JATO457 1 year ago
Interesting tutorial. Many thanks for taking the time to make this video :)
CaptBrooks78 1 year ago
xxxD xxxxxxxxxxxxxxxxxD way harder to use than default fsx planes =(
madzane94 1 year ago
my HDG map is not working............... help
killmuster 1 year ago
A320 is a fun plane to fly but fly by wire has caused many crashes
airdelta9 1 year ago 2
@airdelta9 then i just dissable it if needed by clicking 7 buttons
JATO457 1 year ago
Hey, how do I get CLS to be merged with the Wilco panel? I can't find any GOOD tutorial for it.
sonicfan7 1 year ago
hey hab ne frage: ich geh in config progamm dann auf configuration und drück auf cold and dark dann starte ich den flug und es is net in cold and dark. es steht: dass ich mit parkbremse den flug starten muss.....aber wie? bitte antworte , wäre sehr dankbar......
fabienbable 1 year ago
ich würde mich über ein genauso gutes, deutsches tutorial freuen...aber vielen dank dafür ;)
burschti 1 year ago
This has been flagged as spam show
question! after all star and everything I have the plane good all the surfaces moves great but as soon as I do the take off I can turn left or right I mean not bank for me I have rudder and and roll but not bank does someone knows why?
jorgemdllin 1 year ago
hi i just got this product i want to put in a heading and spped in the panel near the altitude bit but all there is is 3 lines what do i do so that i can put in a spped and heading ta
nathan13593 1 year ago
Right click on the knobs to disengage managed mode. Then you can manually enter heading, speed, altitude and vertical speed.
1VK3 1 year ago
HI I can't disable it!! how to OFF autopilot!!!! Itru disable AP1 AP2 but not working! autopilot is flying an I cant disable it!
bartosz12222 2 years ago 6
@bartosz12222 press "z"
olopolo 2 years ago 15
i jost got the a330 china airlines livery but im not use to the panel i cant find the GPS/NAV button like on the a321 panel and other stuff that i dont get
MusicLover11325 1 year ago
This has been flagged as spam show
@olopolo I Have This Wilco Airbus, But How Do I Set The Autothrottle, Because I Right Click It, SEt The Speed, then What Because It Does Not Stay At The Speed?>
joaofbi4321 6 months ago
@olopolo Hi...i got a problem after D/A autopilot,i cant bank the airplane while approaching the airport?why?
alifshafari 5 months ago
@bartosz12222 a shortcut would be press Z on the keyboad
airdelta9 1 year ago
@bartosz12222 i have the same problem , when i flight in missed approach!!
witnessdreamer 1 year ago
I'm not so much a newbie, but i still like flying tips! If they help i like them!
habbtrillion 2 years ago 2
What's the background sound you're got running there, the cars, chating, ground radios, etc?
FJNricardo 2 years ago
Nice tuto but is not completed, wher's seconde lesson?
75flayer 2 years ago 2
okay i have both wilco airbus vol.1,2 but the heading and speed and ias/mach these autopilot stuff are empty which means i cant find numbers there , so how can i get back these numbers , guys pls. help me , i will be very thankfull.
hammoudy1300 2 years ago
Comment removed
DVA7498 2 years ago
the airvus aircrafts use a turn push and pull technique on the FCU so in order to simulate that on the wilco series left click the knob then right click then you will see the FCU allowing you to adjust the speed and heading .
DVA7498 2 years ago
When I press the IRS Align button on the fmcg, it doesnt do anything. how do i fx this?
patsmithj 2 years ago
When you press IRS ALIGN,do you get an "IRS IN ALIGN ---- MINS" message on the E/WD or EICAS?
instructablesderin 2 years ago
@instructablesderin
no, nothing happens, the screen shows nothing when i press it.
patsmithj 2 years ago
then i don't know what happened...sorry
instructablesderin 2 years ago
@instructablesderin
no prob, thanks, it may be Vista
patsmithj 2 years ago
well,i believe wilco hates anything newer than XP :D
instructablesderin 2 years ago
@instructablesderin
Ha, yea, thanks anyways
patsmithj 2 years ago
You get it on the upper ECAM
ECAaxel 2 years ago
how can i enter the position?
Aceboyt 2 years ago
question! after all star and everything I have the plane good all the surfaces moves great but as soon as I do the take off I can turn left or right I mean not bank for me I have rudder and and roll but not bank does someone knows why?
jorgemdllin 2 years ago
is it possible to run wilco airbus series on windows 7?
kest32 2 years ago
It is ;)..
mrLundby 2 years ago
but how?
I have donne ev´rything that is writeen in wilco page but i still cant do it. I install it as administration and I can call the airbus into the game. but when i insert the departer/arrivel aeroport in the FMc it just crash on desktop. I have already delected th FMC Paste,as wilco said, but it was useful. Please help me :(
kest32 2 years ago
What is in your computer? Specs? :)
mrLundby 2 years ago
what are specs?
when I insert data on FMC it just crash on desktop, like Windows Vista I cant use it...
kest32 2 years ago
Specs is what hardware you have brought to your computer. Processor, graficcard and so on..
I can't really see, what is wrong and I don't know how to fix your problem. Maybe you could go to Wilcos webpage and go to their support page and ask them what is wrong in a mail or something.
One thing you could do is to upload a video showing your problem. I don't think you can do anything better than that - sorry :(..
mrLundby 2 years ago
hey can I just ask something. How can I save a flight plan that I programmed?
zoulation 2 years ago
Please can u help me, i have this plane i am using vista and i do not have any gauges in the plane... someone please help me
quaresmasbiggestfan 2 years ago
go with mouse on the black screen and with the mouse rolling ball turn so will appear the image (do this on every screen)
Nitroboss2007 2 years ago 2
I Dont Really get u ..I go over the screens with my mouse and then do what .. ?
quaresmasbiggestfan 2 years ago
use the small wheel in between the left and right click buttons on your mouse. if you do not have one, try using the up/down arrow keys.
patsmithj 2 years ago
K tanx very much :D
quaresmasbiggestfan 2 years ago
Sure
patsmithj 2 years ago
thx dude.. its really worked for me.. hope for u too quaresmasbiggestfan
irvinmanohar 2 years ago
ok, but when I click on battery switch in vista, nothing happens, could you help me on that?
patsmithj 2 years ago
please, whitch one is your airac? and where did you found it? i don't find any airac for the a330.. :/ very good video, i will be waiting the others!
Nah686 2 years ago
Hey captian, why am i not able to bank the aircraft? Its only going straight, up and down, but not right or left when airborne. Any solutions for this?
firaz91 2 years ago
hey r u pilot
sudesh071 2 years ago
your German?
BritishBoy1993 2 years ago
Yes. Why?^^
olopolo 2 years ago
Your ,,th'' sound like ,,s''
BritishBoy1993 2 years ago
HOw to open cargo doors??????
in fsx answer please sh+2 and ctrl +2,3,4 not work sh 2 opening only left front door how to open the rest?
kiniuber 2 years ago
Don't know about FS X but in FS9 you can make it through shift + e + 2
olopolo 2 years ago
@olopolo thats same with fsx
GazzerHST 11 months ago
Hi everyone! I've got 3 main questions about Wilco Airbus Vol2.
1. How do you open the cargo doors?
default sim it's "ctrl + e + 2,3" but It doesn't seem to work here!
2. Still have no clue how to get inside the cabin with the passengers view!
3. when in 2D cockpit mode I can see nice drops of rain on the windshield. i guess It's custom made by Wilco! But they don't seem to apper In 3D Cockpit?! Does everyone experience this? is there a way to fix it? Because I think i've seen It work!
drpittbull 2 years ago
How do you get the ailerons to pulled down like in real when the engines are off? You can see it at 1:16
aleksanderl 2 years ago
It's a better Model, it't the CLS Airbus A330. Wilco doenst support dropping ailerons.
olopolo 2 years ago
i dont know how to set the autopilot with the vertical altitude settings!
aleupalex 2 years ago
last right side FCU
olopolo 2 years ago 2
@olopolo Hey when ever i fly an Airbus Aircraft from wilco the Heading looks like this ---- any suggestion to change it
arby321 1 year ago 2
@arby321 same problem have you figured it out yet because I'm stumped???
AFA7356 1 year ago
@aleupalex is easy youRight click in the KNOB of VS wether you climb or you descent
witnessdreamer 1 year ago
how can you get the bus in 1.13
chadvader93 2 years ago
if u dont see and wingviews you can add some..just go to the default plane that has them..then go the cfg file of the plane and find something called camera positon and next to it a whole bunch of numbers..if you found the one you want just copy it and paste it in the right section of the planes cfg that u want the view to be in!!
CaNxYoUxStoP 2 years ago
i had same problem its normal , just put your mouse over the guauges and use ur mouse scroll. scroll it up
DVA7498 2 years ago
hey I installed the wilco's sairbus series 1 add on and most of the panel's gauges are all blank it shows nthing but a black screen. What can I do???
grecj187 2 years ago
Thanks EVERY1. Nothing worked, but I appreciate everybody's help. If you still have ANY suggestions, please tell me. I'll keep tryn' though.
MrTsMe 2 years ago
where do you get the skychefs addon?
ChileDDR 2 years ago
Please someone help me fix this problem! Everytime i start up my Wilco Airbus volume 1 & volume 2, my MFD stopped working! Even when i set up everything from Cold & Dark! The MFD is black and everything inside is lined red. The MFD says "Map Not Available". Any ideas?? please someone help me!
LittleLuckk 2 years ago
you have to align your irs, in the fmdc or whatever it's called enter the airports your going to to from, it doesn't mater if your not flying to those airports, then "align IRS" will show up in orange click it and by default it will take 60 seconds
BobbyJEL101 2 years ago
thanks!
LittleLuckk 2 years ago
um i had this problem, turned out it's just dimmed, so use the scroll thingy on your mouse to turn up the MCDU brightness
tankish42 2 years ago
Plz help, i bought my Airbus series Vol 2, i installed according to the manual, but when i start it on FSX, it makes 2 'beeps' and closes FSX. If you know how to get it to work, PLEASE PLEASE HELP! Tell me ANY solutions PLEASE. I'll appreciate all the help.
MrTsMe 2 years ago
are you using vista or xp this problem uesally happens on vista o.s if your using vista make sure your using administrator not guest if still not working go to control panel user turn off auto updates it should work or you can go to Wilco web site they have forums there
win288 2 years ago
HOW TO INSTALL ON VISTA:
CONTROL PANEN, USER ACCOUNTS, TURN OFF USER ACCOUNT CONTROL (UAC)
it will work
Ok If Anyone Here Experiences problems with this in VISTA AND VISTA ONLY TURN OFF USER ACCOUNT CONTROL
win288 2 years ago
go into your feelthere\airbus\fmgc directory in your FS folder and delete the fmgc.cfg file see if that works
stevop21 2 years ago
Thank you very much 5 starts you got m8!
I just did a flight from Queen Atilia to Charles de Gaulle and i completed the fligt with succes! With much thanks to you!
FH610 2 years ago
i was woundering would this help fly airbus because i want to fly a320s a330s 340s and the a380
flakemoretribe 2 years ago
are you french?
PerfectAdminVersion2 2 years ago
Jo, issa
n0xyy 2 years ago
Yes he is...
Maxomat 2 years ago
I think he is German ;)
elofek 2 years ago
thx. much for this video!
I have one problem... if I want to pushback with the airbus A340-600, it says "this plane can not be moved by the pushback-truck".
Why is this? I only have this problem with the Wilco A340. A330 works correctly.
I could use "Y" and then push back the plane, but that's not realistic^^
Can anyone help me?
vsbfbmusic 2 years ago
do you use AES?
olopolo 2 years ago
thanks for the help.. im waiting for my software wilco airbus vol 1 to arrive soon...and i know this will be a big help for newbe like me...have to start yet Airbuses..currently flying Wilco B737
lefouthanix 2 years ago
rgr, if you have questions, contact me!
olopolo 2 years ago
i just download torrents..
hahaha
no need 2 pay!!!
BlindShorty11 2 years ago
What site
Flyglobespan93 2 years ago
i dont have the number at the SPD and Vertical speed i click at +/- it wont work like 2,3,4 like that but i dont have it why???? please help mee...
AirAsiaFleet 2 years ago
For you the same, something is wrong with your installation -> Try an reinstall and delete the registry entries!
olopolo 2 years ago
hahahaha
u'll have to get the correct one!
BlindShorty11 2 years ago
how do u set this up cuz when i load up the plane my thing crashes i found out its to do with the A320CFM_FeelThere how can i fix the beeps and crashes
xboxlivegstar66 2 years ago
Try an reinstall of the product.
Delete all the registry entries!!
olopolo 2 years ago
Hey dude can you please tell us how to merge the Wilco A330 and A340 panels to the CLS A330's and A340's ?
b747dude 2 years ago
read my reponse above :), thats how I have done it
stevop21 2 years ago
when i load up the plane i hear a beep or in game i cant view the cockpit only vc plzz help
xboxlivegstar66 2 years ago
Very nice video!
1 question:
When I start up my FSX with this a320 by Wilco, my CDU panel is not on.
Can you help me on this? Would be very nice of you.
Kind regards,
Bart.
propro1111 2 years ago
Maybe the backgroundlightning is off, go over the mcdu display and scroll with your mousewheel up!
does is help?
olopolo 2 years ago
Thank you very much sir.
It helped :D!!
Thanks again, i appriciate that.
Kind regards,
Bart.
propro1111 2 years ago
Thanks for your response.
Feel free to ask more if you want!
Regards
Alex
olopolo 2 years ago
Please tell me how did you merge it? :)
Thanks in advance!
asirtu 3 years ago
Hey Sir,
I just purchased the wilco series 1 product and I have a problem with it. About 10 sec. after takeoff my controls lock. Why does that happen?
maksiopilot 3 years ago
Hmm, that sounds really strange.
Maybe your flightcontrols, specially your joystick are not calibrated right or maybe at the FSUPIC there is something wrong...
olopolo 3 years ago
How do you open the cargo door with Wilco airbus series, i try with Shift+e+2 ans don't work !! please help me thanks sir !!
LFOB60 3 years ago
As you heared in the video, i merged the wilco panel with the modell of CLS! there is shift e 2 working for the cargodoors.
olopolo 3 years ago
please tell me how to put the Wilco panel with the CLS Models! I find that the Wilco Airplanes look unrealistic. PLEASE HELP ME!!
LittleLuckk 2 years ago
It might not work to put the panel of Wilco to a CLS you can try copy paste the panel folder from the Wilco to the CLS folder replace it see if it works if it works you would not have VC
win288 2 years ago
copy the AIR file from your wilco and put it in the cls folder, rename the wilco one to what the CLS one was, Then take the 'contact point' section out of your CLS aircraft CFG and keep them safe, delete your CLS aircraft cfg and copy the wilco aircraft CFG in, then copy the CLS contact points you saved earlier over the wilco point (otherwise