M7 Ontario bayonet knive for ar 15.

[kaboosejuice]

hey how do you make the bayonet that sharp i have one but its not sharp like that it cant even cut paper and i put it in and out of the sheat like 100 times and its still not sharp

[SuperJar26]

i an looking to buy a new gas block for my dad like the one on the ar 15 in this video how much would one cost

[luke13andress]

why does he have a doll in the top right corner??

[justanotherislander]

nope you just need to get a 14.5'' barrel with a pinned/welded flash hider to bring it up to 16''

[backburnerart]

army navy surplus

[123beepyou]

Where is the store

[backburnerart]

@123beepyou

army navy surplus

[RICHIECONRAD]

You can get an extended M7 for an Ar-15 16 inch upper that is reverse compatable with a 20 inch upper. You never sharpen a bayonet, they are not made for that.

[OnlineBackupServices]

@RICHIECONRAD lol, sure you do, when you do an assault into paper land, there's a lot of paper to cut, so you sharpen the bayonet and attach it to a 15.5" barrel to cut paper with.

[backburnerart]

@OnlineBackupServices

I WANT IT CAUSE I CAN.AND WILL.

ITS LIKE MINDED PEOPLE LIKE YOU THAT WANT REGULATION ON EVERYTHING YOU THINK SOMEONE ELSE SHOULD NOT OWN.

I KNOW THE BARREL IS TO SHORT.I KNOW IT WONT FIT PROPERLY.

BUT YOU KNOW WHAT? I WILL PUT IT ON ANYWAY,CAUSE LIKE I SAID, I CAN!

MY M9 FITS PROPERLY ON MY 590 A1 MOSSBERG 12G.DO I NEED YOUR PERMISION TO POP THAT ON TOO!!!

DONT THINK SO!!!

[OnlineBackupServices]

@backburnerart wow buddy, chill out. you sounded like a grown man on the video, now it seems you are a 13 year old kid. LOL

p.s. LOL at cutting paper with a bayonet to prove it's sharp.. hahaha.. I think you need a pair of sissors in front of the barrel, $1.99 from walmart

[OnlineBackupServices]

@RICHIECONRAD can also be adapted to jungle warefare to cut leaves as you fight through the jungle. LOL

[RICHIECONRAD]

@OnlineBackupServices Funny we never did that in Vietnam!

[jaylamaire1010]

owner of numerous ars this is stupid having a bayonet that doesnt even fit on rifle doesnt look mean looks stupid can tell people like this have never been in combat idiot oh im cool i own a ar

[backburnerart]

@jaylamaire1010

aww..look at me! i want the world to know i been in combat.

thnk u fa the service boy.

[pac6010]

@jaylamaire1010 actually owning one in a private civilian use setting is the only place a bayonet makes sense. Its great for home defense if you where gonna use your rifle for that in close rage. I cant see any military use for it other than opening cans and such lol.

[maxrocks19]

the M7 bayonet was actually designed to fit the M16 20 inch barrel. the M4 and other AR-15 carbines are adapted to fit the existing bayonets (M7) properly

$50??? you got ripped off man

[maxrocks19]

it was actually made for the 20 inch M16, the M4 14.5 inch barrel was adapted to fit the existing bayonet (m7 bayonet)

[ih8suvz]

I bought an upper with a 14.5" barrel so i can properly mount my M7 bayonet. lol

[Rracer300zx]

you could get your barrel cut down to 14.5" and have a 2" flash hider permantly attached. ADCO does it for a good price and they are a top notch company.

[Cube210]

Like if you bought a mid-length AR with this being one of the reasons.

[duncers79]

ha. pull it in and out pretty often lol

[duncers79]

i got that but the clips broke off

[andrewwahlin]

You can have your barrel cut, crowned, and threaded at 14.5" then have you flash hider permanently attached. I had my AR done for $105.

[Kabul81]

Stupid god damn atf why don't they require

a longer barrel on ak's? Are they not short

barrels?

Jman

[2MuchFirePower]

The reason why the bayonet dosent fit is becouse it was made for a 14 1/2 inch barrel while legaly you have to 16'' barrel unless you have a liscense for a SBFA or Short Barrel Fire Arm

[PureSMOOTH1]

its not designed for that ar

[rllang01]

But, the military has found that the 14.5" barrel of the M-4 is too short to get good terminal ballistics from the ammunition they issue (M-855).

So the 16" AR carbines actually give a little better performance over the M-4.

[rllang01]

The bayonet ring is designed to fit over the flash hider of a standard AR-15/M-16 or a military M-4 with 14.5" barrel. The civilian AR carbines with 16" barrel are too long for the bayo ring to line up with the flash hider. Bushmaster does make a 14.5" barrel with an extra long "Izzy" flash hider and bayonets will attach properly on those barrels.

[PdxMotoxer]

M7 = SBR Ar-15 M9 = 16" AR15 (yours)

 I like the self sharpening scabbard.

[Austin17070]

i'm not sure, but i think the M7 bayonet is built to be used with a 20 inch or a 14.5 inch barrel. you may not have the right license for a 14.5 inch barrel, but you should be able to find a 20inch fairly easily and be able to use it legally. nice rifle though. wouldn't mind getting an AR-15 for myself

[mwillblade]

Got one on my mossberg .

[dragonz72]

Sorry to say but what you have there will not fit your rifle or any 16" barrels. Bayonets are for the 14.5, mid-length, and 20" standard rifle. It is useless if you dont have any of these. Bayonet lug on

16' are standard to save manuf cost on not to take it out! Pretty much useless I say!

[215rant]

nice nice, i want one so bad. but umm whats the song that like startes to play at 5:39? sounds cool.

[dragonz72]

email me and I will offer you one!

[SolidSnacks92]

$50 bucks is a bit much for that bro i got mine for $20 at an army navy store in Florida and on government liquidations u can get 50 of these for $200 on a good auction

[duncers79]

@SolidSnacks92 my dad got mine ( i got it from him) in the phillipenes for like 5$

[jaredlee283]

the barrel is little too long,conventional bayonets are suppose to fit right on the muzzle right?

[theUnholySquire]

@jaredlee283 it would still fuck someone up, big time.

[hs083]

AR15 with a 16" barrel (carbine)will be loose because it does not have the proper length. What you want is a 20" barrel an it will fit perfectly. No tax stamp needed.