My friend you make the best unitrack set I have the Nozomi bullet train,my cuestion its? You have diferent power pack or you addicon another one? Thank you
Thanks a lot for the advice. One more question - are the end bridge pieces different to those in the middle, i.e. the sloped girders you can see in the video?
@flymajj The layout is approximately 23 feet long. As for double returning loops, it is possible. One loop section will require ten pairs of 348mm 30deg / 381mm 30deg curved single track viaducts, four 186mm straight single track viaducts, two 62mm straight single track viaducts.
For the middle section, you just add as many 248mm single track viaducts your room will accommodate. With the loop configuration, you'll have a bit of a gap between the two / two straight sections.
On the straight section, I made a mistake on the part number. Instead of #23-018, it should be #23-019. Please double check my part numbers with the Kato website before you order.
I assumed you were familiar with the Kato Unitrack line of products, but in case you are not, you will also need the #22-014 power supply pack and #24-818 terminal unijoiner leads to connect the viaduct track to the power supply.
I also forgot to mention that you will need 2 packages of the #20-047 single track pier pier set for each end loop. These are used by the viaduct so they are elevated off the ground.
@60008vagos and @et2598 I'm currently trying to figure out how to connect this to my urban railway station. As much as I enjoy building an architectural model of the station, I also want to run my passenger trains at full speed. Just a little kid at heart.
This has been flagged as spam show
My friend you make the best unitrack set I have the Nozomi bullet train,my cuestion its? You have diferent power pack or you addicon another one? Thank you
jcastillo732 2 months ago
Thats nice I like it, the sound effects were a nice addition.
auxil47 2 months ago
what kind of track?
MrStuff121 2 months ago
@MrStuff121 The product is called Unitrack made by Kato.
rifhc 2 months ago
Very Well Done, Thanks!
m1engineer 11 months ago
@ rifhc
Thanks a lot for the advice. One more question - are the end bridge pieces different to those in the middle, i.e. the sloped girders you can see in the video?
flymajj 1 year ago
@flymajj Each bridge contains a horizontal girder that allows you to connect to another bridge. So there's no middle or end bridge.
rifhc 1 year ago
Nice setup! How long is this layout?
Do you think it would be possible to replicate this but with double returning loops, i.e. 4 tracks on the straight section?
flymajj 1 year ago
@flymajj The layout is approximately 23 feet long. As for double returning loops, it is possible. One loop section will require ten pairs of 348mm 30deg / 381mm 30deg curved single track viaducts, four 186mm straight single track viaducts, two 62mm straight single track viaducts.
For the middle section, you just add as many 248mm single track viaducts your room will accommodate. With the loop configuration, you'll have a bit of a gap between the two / two straight sections.
rifhc 1 year ago
@1roadstr
On the straight section, I made a mistake on the part number. Instead of #23-018, it should be #23-019. Please double check my part numbers with the Kato website before you order.
rifhc 1 year ago
@rifhc
Thank you very much!
I know my son will love this as much as me!
1roadstr 1 year ago
@1roadstr
You're welcome. I hope you and your son have fun.
I assumed you were familiar with the Kato Unitrack line of products, but in case you are not, you will also need the #22-014 power supply pack and #24-818 terminal unijoiner leads to connect the viaduct track to the power supply.
I also forgot to mention that you will need 2 packages of the #20-047 single track pier pier set for each end loop. These are used by the viaduct so they are elevated off the ground.
rifhc 1 year ago
@1roadstr
For each end loop you'll need
#20-530 348mm radius 45deg single curve viaduct (quantity 4 packages)
#20-410 186mm single track viaduct (quantity 1 package)
#20-047 single track pier set (5 per package)
For the straight section you'll need
#20-400 248mm single track viaduct (quantity depends on length you want)
#23-018 double track pier set (6 per package)
The double track truss bridges vary in color. There's black (#20-438), silver (#20-437), light blue (#20-436) and red (#20-435).
rifhc 1 year ago
I would like to run this exact layout.
What parts are needed?
1roadstr 1 year ago
@60008vagos and @et2598 I'm currently trying to figure out how to connect this to my urban railway station. As much as I enjoy building an architectural model of the station, I also want to run my passenger trains at full speed. Just a little kid at heart.
rifhc 1 year ago
It appears that youtube has smoothed the imagery to make it appear less grainy. I could see the noise in the original upload.
rifhc 2 years ago
Thanks. This was my first video posting. My apologies for the grainy appearance. The lighting in the room is fairly dim.
rifhc 2 years ago