The Stencil Cap

[evr1nr]

buying this is a waste of money

whoever uses ironlak can make them in around 5 minutes with the ironlak caps

[Smak0ne]

stencil cap work whit MTN94?

[themadscientest]

@Smak0ne it has a doughnut... just remove it and go for it.

[rtti88]

how about can controll im not saying getting thin lines is easy but with low presshure paint and a keen hand with time and practace youll learn how to do it with out a stencil caps aste of money

[graffmang503]

i'd rather get a needle cap

[luckutyzzz]

@graffmang503 not the same...

[graffmang503]

@luckutyzzz im saying the needle cap is better and more useful

[luckutyzzz]

@graffmang503 mhhmmmm... needle cap sprays a lot of "bubbles" around

[mrazok1]

yeaaaaaaaaah !

[rtti88]

has any one ever herd of can control i get those lines with my magic fingers

[Paintfiend123]

get wwwaay better thin line if u let out pressure from the can turn it upside down spray for a bit and then use that, there the skinnyiest lines!

[yebomata]

i dnt see how a thin line is good for stencils. shouldnt it be a fat line?

[Paintfiend123]

@yebomata lol it aint made fo doing stencils mate, it called a stencil cap cos it sort of stencils on the line if you get me

[NOLALongboards]

@yebomata its not literally for stencils, but producing stencil like thin crisp lines..

[LeWiS2K9SMUDGEMOONED]

cheapest at oinkart bullshit

A shop near me sells all there caps 20p each

40cents if u in USA

[mrKANYEwes]

@LivinThatHighLife

not jus for toys idiot,

although, i think a toy would buy this cause could easily make one of these usin a paint top

[Kyu1LL]

i'm looking for a better thin cap, so far the gold isn't that thin (maybe it's my lack of control)... but stencil caps, at least all the ones I've made are messy and don't really make it worth it. you're wasting more paint than just cutting back on the line.

[KiPKayfanatic]

Why when u can make one

[xJackMattx]

hey, i just used my very first non-stock cap (a pink dot fat cap) and i need some help with flaring. does anybody have any special tricks or tips on how to flare properly? -please reply

[darenun]

we used to make theas back in 2004 just a box cutter a lighter pin and spray top was all you needed 5 mins and some creative thinking and there you have it but this at least fits alota cans

[nightmarefacility]

why pay? every can you buy comes with the materials needed to make a stencil cover in like 10 mins. just make sure you have a boxcutter.

[Kagenac]

@nightmarefacility no not every can... mtn doesn't come with the top you need -.-

[EON352]

THIS IS NOT A NEW CONCEPT! nothing against james or oink. but stencils caps have been made by hand from rusto/krylon lids by writers in LA for over 15+ years. just thought that should be cleared up.

[superpezzottI]

how do u produce one of these?

[rexnickles2]

@EON352

yeah, thats why they sell these... so you dont have to make your own.

[TheTruth760]

u might as well use a fat cap for a flat big spray

[elfenbrot]

u can buy needla caps as well, theyre cheaper and u get the same thin lines, but u need a can with low pressure, otherwise it beginns to drin very quickly..

[elfenbrot]

u can make a stencil cap by your own.. if u have mtn94 u can use that cap, oder cup the inner part of the caps of molotow out..

that cut it, a drill a hole insite how big u want.. if u try to do it the first time, try out wich size do u like most for the hole..

[OutMidnight]

004connec has the same price for that stencil cap...

[nygrafite1]

dam that waist alot of paint lol

[fr8ARTruleZ]

I think if you use it on a can like Montana or Belton, it isn`t as messy...

[fr8ARTruleZ]

I got my stencil cap today, and tried it.. These are VERY messy..

At least on the cans i used..

[R1A9T9M5]

do u use stencil caps for characters

[GoodEvenings]

Someone explain to me how i get my colour donut off my ironlaks...... please.

[blahness666]

pop it off with the screwdriver i think, its just sitting on top of it, its usually just popped on at the factory, could be wrong about ironlaks though...

[13thNemesis]

you can make it yourself really easy...

[awstrali]

how?

[GraffLife25]

how the hell do you get these things off?????just put one on a black nitro 2g can (400ml) and it seems impossible to get it off!!!!

[CheeeezPIC]

It doesnt come off.

[o0SikZtar0o]

are there any stores that just sell caps?

[beckwithpj]

Bro i got like 4 of these in my crate outside lol FUCK ITS RAINING AND MY CANS R OUTSIDE GOTA GO GET EM

[QupeOne]

where you can find this cap????

[MiNdVsk]

you make em'

[9mmmg1]

r u retarded look at 0:38 and it will tell u

[alcatraz000]

well i need this cap, i make my oil paints in graffiti, i have many details on my paints, i have to use a very very thin cap so this cap is what i really need

[MiNdVsk]

you make em'

[01SonofAbe]

the best caps for thin lines are used on LOW pressure or dual pressure cans first off. next, Maclaim caps or sometimes called pro caps(white cap, grey dot) and yes, stencil caps usually are made on the street, not in a wharehouse. cap, x-acto and lighter.

[allfeddup]

is the stencil cap the thinest cap out there!???

or can you tell me what other caps are really thin?

please write back asap

[Wildm0use]

Also try Molotow Super skinny cap...

[grafittimaker]

pretty cool but...

we dont need those caps to make graffiti

[MiNdVsk]

sumtimes you do for doing your tags in small places

[pindicita]

grimgos kuliaos sakoweas kompran puras weas un cortakarton i una tapa de spray listo you fucking stupid american people!!!!

[o5k]

PINCHE WEY! ES PARA LOS QUE TIENEN DINERO.....Pinche Cabron!

[LysergicAcid25]

who needs this shit.. fatcaps is what we need :)

[Systemkid07]

hellz yeah

[KuZjAwithVEDOM111]

ou need this for thin lines at characters and so on .. ;)

but yes FATCAPS IS THE RIGHT THING .. =))))

[zipposnotrippos]

@LysergicAcid25 you know the score, skinny is for pussys

[vasilhs95]

@LysergicAcid25 yeah mate... why bothering with all these cap bullshit, one fat one skinny and one molotow stock is what i use to make my bomb ... who would need a pease of shit like this?

[krinkdink]

@LysergicAcid25 banksy

[ceriabonte]

these are realy cool men

[conautiver]

Dear James , You Fail

[STOBIEPOLL]

toys for toys! we never had any good nibs in australia when i started besides the push forward and tuxan nib. we had the shitty fan jet nib. pulling back the nib when spraying would get lines like that. mad finger cramps after a while though.

[syhis]

it's called evolution!!

[fatpossum619]

We used these back in the 90's but cut our own out of lids. People used to call them cheater caps. Its almost like using an airbrush but they make a huge mess.

[wagonyarn]

man i bot it and it hella screws up ur canssssss

[mekaechs]

the stencil cap is the inside circle forn the can's lid, it's jus cut into that shape...ive made a few with just my knife

[OURGEEKAY]

these are super easy to make

anyone buying these is just throwing money away

[blotto87]

you can build this shit yourself with the cover of molotow cans. just break one half of the cover out and then bore a hole in the other half.then you spray through the whole, but don't forget to wear gloves!^^ it's cheaper.

but best is, to cut the lines and not to use toytools!!! XD

[DailyGrower]

It is called "stencil cap" because you can get so thin lines that it looks like you have used a stencil, not because you would use it on a stencil. Use your brain youtube :3

[4ctup]

well, if ya did know anything about stenciling, you would realize there's always that special need of something when it comes to one's work......we use montana, but yet there was always krylon...hmmm......it's an extra.....it gives you more variety to choose from......it's business is for, and marketed for us....the artists...it's simple guys.

[cervantez333]

makes no sense. when i stencil i use a fat cap to cover it all faster. why would you need a thin? plus you can make that shit yourself

[sepague]

does the stencil cap works on a color place or on a krylon ... plezz comment back thanks

[cervantez333]

yeah it would but you can make one out of teh lid on the can. just cut it and shit

[jboogie2192]

Just a tipp for toys to get better.

[306nukka]

In my opinion this is a gimmick. Just learn how to cut back clean if you want fine details.

[R3NT0NeR]

306nukka, not really gimmick man. This cap was pretty underground and was homemade by some writers back then. Cutting back would probably take sum extra time. With this, u probably need to do just one line to do a fine detail. But yeah its pretty subjective, some find it useful others don't.

[MidwestArtist]

Damn! I would use that for detail and freeform. I'd use a fat cap for stencil.

[R3NT0NeR]

this cap sure waste alot of paint. But it comes worthy for those who does a photo realistic images, small detailed fill ins or really tight small fonts..

[isn0t902]

$2.75 per cap, thats a rip off

[japinQc]

yah but it dont really clog

[madcuzimFLAGRENT]

you only need one dude...

[IHEARTGRAFFITI]

I threw mine in the bin straight away, didnt buy it from you but in my opinion there crap. Ive used it on beltons and monster cans with thin caps, the paint just builds up inside the stencil cap and NO paint even comes out! lol

[mr1eight7]

clean it then idiot.

[J3kEL]

ahaha .. caps are 35 cents where im from .. .. 15 cents for a small tip like NY fats or german or somethin .. illeh

[dusty1r08]

edNKLG

[kickthetv643]

2 dollars 75 a cap?! fucking hell there only £1 where i live lol

[UDKAE]

wheres that from??

[tornadonekit]

wich is 2.75$ in American

L2Count

[hillcrestG]

thats fuckin nutttssss!

[Graffitifreak01]

this is shit. it wastes paint as fuck

[Michael0oo]

Messy as hell too.

The first time I used one of these.

I threw the can into a canal.

So messy.

[Graffitifreak01]

and you don't need such thin caps!

[Michael0oo]

Foreal dood.

Unless your tagging like Odieth then I understand haha.

[Graffitifreak01]

ahaahaha

[booboom1p]

2 dollars for one cap fuck that jazz

[turnrock]

only toys buy these.real writers make their own for FREE !

[PraysePaint]

no you have just watched bomb the system too much faggot

[turnrock]

keep hiding behind your computer talking shit.

[Ekclipz]

LOL sickest argument ever

[Michael0oo]

Foreal son.

[Watchavideo2]

just like grey dot

[1275allen]

so they make very thick lines to comment me back

[zskar]

in my opinion markers are better

[PraysePaint]

for what?

do you ever paint

[zskar]

yeah...

[167smokey]

wow in New York,Bronx dey sell Three Caps For $1

[jose213ss]

its cool for small hitups

[TooeleGrinders]

We sell ours for $1.99 but honestly would only use these is I didn't have room to cut my lines line doing photo realism or really detailed work. I love and hate that anyone can buy one, I would rather see people make their own, but at two bucks a pop why bother?

[Michael0oo]

For like detailed stuff you'll need it.

Not for bombing.

[toner91eso]

now i can do the tiniest throw up in the world! bwahahahaha

[NaksitAsoo808]

all u dumbass out there that dont noe want the hell the stencil cap is used 4, get ur shit straight its used for details

[rrefs]

the tinest outline ^^

[kashifcj]

you can make your own stencil cap by cuting up the top of a belton molowtow. just look into the top of a molotow spray can and cut out the inside top . then cut out the to of that and make a whole for the paint to spray through. and it free if u buy a belton molotow.the stencil cap ha been around for years.

[carladams2060]

i can do the same with a sharpie.

[chilidog1001]

if u wana noe how look at this vid it also shows u how to make a nice non drippy needle cap

[chilidog1001]

lol u noe wuts funny the stencil caps works alot lik a stencil lol just use a damn skinny cap cuz wtf i dont need no skinny line i want a bigger line so i can fill the stencil quicker god dang it

[10oner]

wow your kinda dumb you dont use it for stencils you use it for peicing or chars

[smoky281]

stfu toy

[10oner]

alright your dumb too ask james he will tell you its for peiicing and burners what else would you use it for

[smoky281]

there are better caps u can use is what i really mean this will make ur shit look like shit aha

[freddyjr6]

you Fail

[chilidog1001]

ur dumb a piece its lik 3 times ur size and u want a line skinny as fuck no 1 is guna see

[10oner]

i know this thats what it for it cakled a stenicl cap because the cap itself is like a stencil not cause its used for stencils you fuktard you know nothing

[chilidog1001]

k nobody need s line that small for pieces dumb shit and its not for pieces u got 3 thumbs down so who noes nothing now shit head

[10oner]

o you do nedd small lines for detailed peices whats it for then

[WinnipegPride]

maybe not for your pieces,

but for the typical LA style i always got buddies complaining for smaller lines.

for wording they will put next to its or something like that, for small tight details that you dont wanna sit at the wall fro 10 mins workin at one thing to make the lines match up in cleanness and size

[chilidog1001]

needle cap

thats wut ther made for

[WinnipegPride]

needle caps spit paint

i can control them fine, but its a bitch to keep them clean and make sure you dont let it spit

[WordsnMane]

Giddy shit man..

[graffkid4]

does all the paint flood the top

[santasfanny]

yeh

[alexabell123]

yup

[TehKoolOne]

Just take any spraypaint cap and trim it down. Then punch/drill a hole in it.

Don't waste $3.00 kids.

[GraffitiMaster13]

yea i kno its a waste for just a cap that will get ruined after the second time u use it

[ReadThis1fu]

i have not read any of the comment below me sorry .. to baked , BUT!

does the stencil cap not just caught paint? and over flow?

that looks to me like a grey dot ? have you not done a grey dot video JAMES?

[chilidog1001]

lol u noe wuts funny the stencil caps works alot lik a stencil lol

[CG0R3]

sounds like oink art are starting to milk writers..

2.75? 2 caps cost as much as a streak.

lameee

[PerkillZ]

word

[CheezeDude915]

these things are tight lookin ive made em with can tids. but you gotta turn the can over every little bit to drip the paint off.

[mezol1zee]

i used to make these out of the tops of spray cans,you jus pop the top off and try to take the middle part of it..it's easy..so why pay 2.75..

[WinnipegPride]

i didnt think it'd work this good actualy...

but ima have to buy one for pieces when getting insanely fine cut lines.

cause needle tips i gotta work to fast and put barely any pressure down.. i hate doing that cause the caps a spitter.

i think ill try one of these out one time.

its only $2 thats barely anymoney.

[GraffTips]

yea i bought it thinking it was a "cap" not a little ring around my can. and yea it wastes a shit load of paint and its crap

[chilidog1001]

and how do u take out the donut

[javywrites]

crack da donut den take it off

[chilidog1001]

really??? crack it dand i swear ther was a way to not crack it

[WinnipegPride]

pry it off where the break line is with your fingers, if its stuck together to good use a key or something and it comes right off

[chilidog1001]

dude wtf wont the left ovr paint drip into the valve...just use a dang skinny cap good enuff or make ur own

[dreaken1993]

juz cut da top off a lid and put a hole in it

[Hunjie]

amazing new concept?

just peirce a hole in the beloton tin.

[React1995]

it's made out of a spray paint lid

[truhiphop123]

nice review...I wanted to see how this "stencil" cap works.

[santasfanny]

there shit

[yargl]

You can make these really easy, why waste your money?

[Graffitifreak01]

Wow.

[FeamsOne]

i make that shit myself for years!

[Graffitifreak01]

how?

[TehKoolOne]

Just take any spraypaint cap and trim it down. Then punch/drill a hole in it.

Don't waste $2.00 kids.

[FeamsOne]

just get a cap like belton n shit have, make a small hole in it and at the other side a big hole for your finger..

[5l03r]

lol

[toner91eso]

now i can do the tiniest throw up in the world! bwahahahaha

[dAMOtheELUISENIST123]

kool!

[TAZER44]

nice

[Mike2133]

already ordered mine