turbo sounds angry than a fat bitch with a penis... what tranny are you running on? please write back asap i have a '00 accord 4 cyl v tec auto and im thinking bout putting some work into it.. hmu
Im hoping to do a turbo build on my f22b1. Im built for all motor as far as internals go right now. Pushing 283 whp @ 5800rpm and 310 ft/lbs @ 5200rpm with a built head and high comp pistons. i want to see what some turbo pistons on 8psi will do :D 350whp?
@markkjay In case you did not know the 200 hp v6 is not any faster stock than a 2.3l 4 banger of the same body style. and the 3.0 was not built with a manual until it was put in the girly looking 2003 body. Turbo that automatic and you will be swapping trannies every 20k miles. Bigger engine= more wieght..weight all in the front= bad handling. now you know why
Dude i have a sleeved, heavily Ported & Polished JDM F22B DOHC with forged internals (non VTEC) swap in a 91automatic Honda Accord. I'm runnin a tiny externally wastegated T25. All i got on it is stock injectors and fuel pump but with a cheap ass FMU and my shit dies every time u boost it up a hill??? any help would be greatly appreciated because no one really takes these F motors that far let alone on a stock automatic Honda transmission
im tryin to turbo my 1999 Accord lx, all i have on it is the exhaust, how much more would it take to run about 8psi, cause i cant find any pistons or rods for the F23.
I looked into turbo a honda auto..its a little more expensive than a manual.not because u have to mod the engine but because of the ecu and transmission.they have to make sure ecu is good and tuned right but most of all the transmission has to be built right.they have to carbon coat sycros-get a new high input torque converter-and a tranny cooler.this will run u about 2g alone plus ecu its close to 3g's unlike a manuel which u just upgrade the tranny that on runs about 1000 or less.
just showin love for the single slammer hondas out there. just cuz we're missin a cam dont mean we're crappy. keep a look out for my vids. goin for 250whp/tq with stock internals runnin aobut 9-10 pounds. 5 speed btw. F23A1 FTW!!
now i got a couple of questions for a similar build, have u found a good set of aftermaket pistons and rods for the F23, i have had no good luck. and how good are the stock internals holding up to 5 psi and have u boosted higher or heard of anyone that has on stock internals on the F23. Whats better for the accord as far as tuning managment goes atleast for your money, thanks
CONGRADULATIONS, YOU JUST GOT TO THE HORSEPOWER OF A 3.0 V6 ACCORD STOCK!!! lol, im just fuckin wit u, i have a 3.0 v6 that im lookin to convert to stick since they never made that style accord v6 with manual tranny
@reydeboricuaz1 a year late but just so you know our 3.0 v6 accords are 200 hp yes...but to the crank. his is 200 WHP...that's 200 to the wheels dude. our accords will put out 200hp but due to power lose through numerous things in the car we can make out 150ish WHP so yea...he's still faster than us with his 4 banger.
@reydeboricuaz1 Congragulations you bought a V6 accord that does the same 1/4 mile of a stock f23a1, but handles alot worse! SMART GUY That car in this video woud stomp your car by at least 3 car lengths in a 0-60 race
nice car ,but i can easily make a F23A have 200+hp with out a turbo. just a noter. and with a turbo i can probably make 300+ easily. believe it or not.
well what i'm saying is that you should have done the turbo last. you should have probably tried to tune it up to 200+ then add the turbo, which will then add on amazing hp lol
i have an 01 accord 4dr 2.3 auto. tranny... and im looking to get it boosted to about 7-8 psi... have you had any problems with your turbo application that i should know about?
turbo sounds angry than a fat bitch with a penis... what tranny are you running on? please write back asap i have a '00 accord 4 cyl v tec auto and im thinking bout putting some work into it.. hmu
JayC376 1 month ago
How does the transmission hold up?
doggystyledave 3 months ago
Comment removed
ThemJusticeLeauge 11 months ago
Im hoping to do a turbo build on my f22b1. Im built for all motor as far as internals go right now. Pushing 283 whp @ 5800rpm and 310 ft/lbs @ 5200rpm with a built head and high comp pistons. i want to see what some turbo pistons on 8psi will do :D 350whp?
Chriskawi34 1 year ago
way to paint the lip the color of the car...
SamFisherCT 1 year ago
hey are you guys located in NY? i think by the name of shahid and his accord was modded at your place. put out about 363.29whp 314.08wtq @ 11PSI.
KnighTHawK1104 1 year ago
3.0 V6 makes 200? 3.5 makes 210/240? Why not turbo one of those instead?
markkjay 1 year ago
@markkjay In case you did not know the 200 hp v6 is not any faster stock than a 2.3l 4 banger of the same body style. and the 3.0 was not built with a manual until it was put in the girly looking 2003 body. Turbo that automatic and you will be swapping trannies every 20k miles. Bigger engine= more wieght..weight all in the front= bad handling. now you know why
thelazyguy13 1 year ago
@thelazyguy13 What he said /\
RIPPMODS 1 year ago
@thelazyguy13 so in your opinion the 4 cylinder is better?
reddy8123 1 year ago
Dude i have a sleeved, heavily Ported & Polished JDM F22B DOHC with forged internals (non VTEC) swap in a 91automatic Honda Accord. I'm runnin a tiny externally wastegated T25. All i got on it is stock injectors and fuel pump but with a cheap ass FMU and my shit dies every time u boost it up a hill??? any help would be greatly appreciated because no one really takes these F motors that far let alone on a stock automatic Honda transmission
f22turboaccord 1 year ago
im tryin to turbo my 1999 Accord lx, all i have on it is the exhaust, how much more would it take to run about 8psi, cause i cant find any pistons or rods for the F23.
gearheaddrak 1 year ago
what can you do for a k24a series engine. I want to build up my 06 2.4L accord but having trouble finding parts
outoforder420 1 year ago
how much does it cost to turbo a auto accord cuz im looking to get one. and how can the psi be before its too dangerous for the engine
sctflasher379 2 years ago
I looked into turbo a honda auto..its a little more expensive than a manual.not because u have to mod the engine but because of the ecu and transmission.they have to make sure ecu is good and tuned right but most of all the transmission has to be built right.they have to carbon coat sycros-get a new high input torque converter-and a tranny cooler.this will run u about 2g alone plus ecu its close to 3g's unlike a manuel which u just upgrade the tranny that on runs about 1000 or less.
acurais1 1 year ago
just showin love for the single slammer hondas out there. just cuz we're missin a cam dont mean we're crappy. keep a look out for my vids. goin for 250whp/tq with stock internals runnin aobut 9-10 pounds. 5 speed btw. F23A1 FTW!!
jesams 2 years ago
wat does ftw mean! lol i always see that.
sctflasher379 2 years ago
@sctflasher379 for the win
qpzmak 1 year ago
@sctflasher379 FOR THE WIN!!
f22turboaccord 1 year ago
now i got a couple of questions for a similar build, have u found a good set of aftermaket pistons and rods for the F23, i have had no good luck. and how good are the stock internals holding up to 5 psi and have u boosted higher or heard of anyone that has on stock internals on the F23. Whats better for the accord as far as tuning managment goes atleast for your money, thanks
lilbluecar89 2 years ago
Its all custom, sleeve, pistons and rods. we can build it for you.
RIPPMODS 2 years ago
I Pulled out the crappy F23 and the Auto and put in a H22 with LSD and Im going to Boost the H22
ManniesWorld88 2 years ago
do you still have the front lip cause I want to buy it and put it on my 02 accord sedan
tphamdx 2 years ago
wow dats a stock F23A with turbos? cool! I have a stock one myself. Thanks for the vid
zeromickz 2 years ago
CONGRADULATIONS, YOU JUST GOT TO THE HORSEPOWER OF A 3.0 V6 ACCORD STOCK!!! lol, im just fuckin wit u, i have a 3.0 v6 that im lookin to convert to stick since they never made that style accord v6 with manual tranny
reydeboricuaz1 2 years ago
Cool, this car now has a custom turbo system and is making 340whp with 10psi... we will have video up soon.
RIPPMODS 2 years ago
r u still using ur auto tranny thats slipping or u got a new tranny with that?
ofuani 2 years ago
@ofuani why would it slip if built right
acurais1 1 year ago
@acurais1 It's the transmission... He's purposely going to let it die and do a manual swap.
Roadrash1991 1 year ago
Hey do you still have the front lip?
Cause I want to but it :)
XHouseSlipperX 2 years ago
@reydeboricuaz1 a year late but just so you know our 3.0 v6 accords are 200 hp yes...but to the crank. his is 200 WHP...that's 200 to the wheels dude. our accords will put out 200hp but due to power lose through numerous things in the car we can make out 150ish WHP so yea...he's still faster than us with his 4 banger.
KnighTHawK1104 1 year ago
@reydeboricuaz1 Congragulations you bought a V6 accord that does the same 1/4 mile of a stock f23a1, but handles alot worse! SMART GUY That car in this video woud stomp your car by at least 3 car lengths in a 0-60 race
thelazyguy13 1 year ago
nice car ,but i can easily make a F23A have 200+hp with out a turbo. just a noter. and with a turbo i can probably make 300+ easily. believe it or not.
SilentAssassin 3 years ago
well what i'm saying is that you should have done the turbo last. you should have probably tried to tune it up to 200+ then add the turbo, which will then add on amazing hp lol
SilentAssassin 3 years ago
you sound so jdm =D
whateverthatmightbe 3 years ago
lol xD
SilentAssassin 3 years ago
An Auto Accord this one makes 140 whp with heads and cam and header.
The turbo brought it up to 230ish with a slipping clutch... please read the description before posting.
RIPPMODS 2 years ago
200HP is not alot get a 16psi turbo kit or something which is worth it rather then a 4 or 8 psi kit you are getting.
Shazee083 3 years ago
WTF u dont even know what controls the psi in a turbo set up or how it works.. newb ass ricers..
rahe35 2 years ago
i have an 01 accord 4dr 2.3 auto. tranny... and im looking to get it boosted to about 7-8 psi... have you had any problems with your turbo application that i should know about?
pixitail01 3 years ago
i could never really understand on how they dyno an automatic car. anyone know?
mrkd225 3 years ago
it would be better off to get a 5spd, u cant rely on 98-2002 accord automatic trannys as there was a HUGE recall on them
saleem83 3 years ago
Correct... 5spd swap works perfectly
RIPPMODS 3 years ago
very cool, are you going to beef up the transmission anytime soon?
alienpowergt 3 years ago
Yes, we are swapping the trans and getting through the electronics involved. We will post results as soon as we get them.
RIPPMODS 3 years ago
swapping, so your going for a 6speed manual, or just beefing up the auto trans thats in it?
alienpowergt 3 years ago
There are no 6spd trany for the I4, 6spd only available in V6 model.
truonghthe 3 years ago
Yes, we are doing a trans build with an LSD
RIPPMODS 3 years ago