TAMIYA TT-01 GRAPHITE CONVERSION KIT

[hairolzulhizam]

it it the same between tt-01 and tt-01d chassis??

[thenitrorcfreak]

@hairolzulhizam the tt01d is a newer upgrade with adjustable wishbones and a few alloy parts

[vauxhall16]

it doesnot support the installation of stabilizer bars?

[TheMoffBoy]

@vauxhall16 it does support the stabilizers, but you will not require them, as the chassis will be stiff enough with the chassis and upper deck, if u add the stabilizers you will have too much rigidity and not enough grip.:)

[KingDudi16]

Are there any disadvantages converting from TTo1 type E to a graphite chassis?

I'm thinking of upgrading. Thnx

[bolpkia951]

whats da song name

[aelitasweet]

i wish i can have this car..i only have cheap car (4wd) with 2 motor .one motor for front wheel and another motor for back wheel..it sound very loud but drift well..

[CONTRASTSCHUMACHER]

how much does this kit cost ?

[killersushi99]

I just dont like the fact that rocks or sticks can go between those gears teeth. Iz got bad luck.

[SkiPro1368]

How fast does that Super Stock motor go (rough estimation) and can the Super Stock motor operate with Tamiya's TEU-101BK ESC?

[SkiPro1368]

How fast does that Super Stock motor go do you think?

[vauxhall16]

Hi chinkmaster000, do I need to purchase other parts other than the graphite chassis to transfer all the current parts to the graphite chassis? owh.. and... what advantages will i gain converting it other than the obvious light-weight? thanks.

[vauxhall16]

Hi chinkmaster000, do I need to purchase other parts other than the graphite chassis to transfer all the current parts to the graphite chassis? thanks.

[TamiyaTutorials]

how much is the conversion kit ?

[IceBlack406]

no front bumper+

[leebob1999]

Beautiful!

[rcmainiac999]

How fast do they go about with everything stock?

tnx

[fordyrox]

did you have to glue the servo in place and did you have any problems with assembling it, in the steering it is apparantly loose, Is this the case?

Thanks

[007700887]

is this v1 or v2?

[CR0SSCARRIER1987]

that is a nice set up you have there. i want it so bad.... er the Graphite Conversion that is oh and the battery. already have a 7700 kv mamba... but great video man. and thanks for showing what a Graphite Conversion is.

[killindustries]

wats the song bro the car is made

[diegurke123]

damn nice...!

[AEAantiemo]

Gay music is gay.

[RCrulz]

Hey,i looks good and all.

But sometiems all you need is the basics. Etc, Tamiya TA05,Well kick this. sorry,Thats my opinion.

[RCDr1ft]

Does the chassis make the car go faster in any way? speed-cornering? cant be any lighter than a plastic on can it ? and finaly it makes the car shorter i think!!!

[trockenschwimmer]

what's the name of the song?

[RCDr1ft]

it said at the end...

[RandomJenkinson9]

How much did that cost you.. planning on getting one for xmas. Any good?

[Joriske61]

Don't do it. Just buy a better car. This is a wast of money.

[sidewaysking]

Thanks for sharing I was thinking of getting one of these conversions.

[DanhNguyenster64]

Do you happen to know how many volts a stock TT-01 can take?

[Maxxah]

7.2V

[DanhNguyenster64]

I know it has 7.2V stock I was asking what is the maximum voltage it can take stock without concurring too much damage or ripping itself a new one... 8.4 maybe? Is it asking too much for it to handle a 9.6?

[MMX3SE]

it depends on the motor and esc and stuff. It's a strong car, it can handle, try 11.1 lipo with 7700^^

[XlopenX]

my friend and i are using dual battery on the stock esc and gt tuned motor.. thats 14.4V, but you will need a secondary battery to connect to the receiver or it will fry..

[SUPERFORMIAN]

dude, it depends on da ESC not da chassis

[integraxdc2]

damn i cant wait till mine come in!=)

[infernuse]

it looks cool,but how does the rims look like?

[jwrx7tt01]

whats so good about graphite chassis?

[stratmast3r]

lighter, stronger, looks better

[jwrx7tt01]

is it really THAT much lighter and stronger?

[stratmast3r]

Yes, it is really THAT much lighter and stronger

[jwrx7tt01]

ok cool.

[laronfox]

The difference is really not that much noticable. I have a couple of friends that spend all that money on graphite chasis and aluminum suspensions and i'm still faster top end and lower end. Its the set up you're using and also the esc and motor. Graphite is just eye candy an wasting money. Sure its a bit lighter then plastic and alot stronger but its not going to make a difference if all the other stuff like esc motor and tunning is not up to par.

[stratmast3r]

hi there, i have a Mamba MAx 7700kv Brushless system in my Tamiya TA-05 and i have the carbon graphite conversion kit. BEleive me its much lighter! It looks way better and mine is extremely fast at the same time! (the motor is beyond a 4t brushed) I also have aluminium hop ups on it. ITs stronger, faster and looks cool! Check out the video of it

[laronfox]

how much weight difference are we talking about in ounces? I have a brushless sprint flux with a 28 pinion and 93 spur gear running a lipo 7.2 volt . But i was going to say with a shaft driven you would notice a big difference in performance then a belt driven with carbon graphite.

[stratmast3r]

hi, We're not talking about alot of weight difference... BTW i prefer belt driven. All my shaft drivens are much more noisy. Belt Driven Cars respond faster, are MUCH MUCH MUCH quieter and have better, simpler diffs. BElt driven cars are for on road only though. Most offroaders ae shaft driven because of dirt, etc...

[laronfox]

absolutely hit the hammer on the nail.

[stratmast3r]

I have to say that it is a big difference in weight if you are doing professional racing. 10 grams can be a big difference.....

[laronfox]

yeah you're right.

[franki0man]

do you have problems with the motor,lke less velocity or another weird noise?

[FSbeats17]

love it, the only thing is the gears are exposed you feel me?

[syberia78]

song please

[stratmast3r]

5/5 +favourites. Would the kit fit my tt01d?

PLEASE REP:Y!! :) Nice chassis! thanks!

[tknv311]

yes this kit would fit.

[stratmast3r]

what's the cheapest price for it?

[chunkyfunkymonkey28]

it's about 90 dollars

[stratmast3r]

i've seen it for £20 + £5 delivery

[jimmymagnum07]

im selling my tt-01, just like this but with alot more aluminium n 9t brushless goes like stink, too fast for me lol anybody interested give me a shout :D

[PatrickBonds]

I'm interested

how much?

[jimmymagnum07]

i was lookin for around 200, theres alot of stuff that comes with it like all radio gear, used wheels, and spare screws and stuff, i was guna put it on ebay but i thought it wouldnt get much this time of year and i was waiting for christmas

[jimmymagnum07]

btw ive payed well over 200 just hopping it up, comes with 2 shells, 4 batteries aswell

[tknv311]

I wanna buy your TT. trade a built Sprint 2?

[jimmymagnum07]

sorry mate its sold now, i just wanted to get rid of it so i sold all i had for £140, im into bmxing now lol

[gtrs1994]

The 3 racing conversion kit includes most of most of the things you need. The shock towers are together with the gearbox. Besides the parts they provide you, the rest should be taken from the original tt-o1. After owning it for more than 9 months, i only have 1 advise, you ought to buy the 3 racing graphite shocktowers too to help strenghten the shocktower because it breaks easily.

[edstar83]

nice

[E30m3EvoVIIIMR]

does everything u need come with the kit, i got one and its on the way but the pic i saw it doesnt have the diff covers and shock towers. does it come with them? i think there are two differnt kits (#TT01-24/WO) and TT01E -#TT01-E35/WO

[suprafan246]

how much did you pay for the kit

[markxb12]

are u drifter or touring driver becuse i will maybe buy that and is it fast???

[Mcintee09]

i jus got da convertion kit version 2 for my car im impressed n i havent even driven it yet

[Devi1cry]

Thanks mate your pictures helped me assemble ^^.

[chinkmaster000]

No problem ^_^

[CONTRASTSCHUMACHER]

how much does the kit cost with the graphite

[scottcblack]

does the carbon upper deck come with the chassis conversion? thanx

[chinkmaster000]

yes it does

[boxster260]

whats the top speed

[th3ha1og0d]

Looks like a good chassis...I really want to hop up my tt01...I only use it for bashing and it goes pretty fast, it's got a 15t motor.

Do you think I should get this graphite kit, it looks really good but the only thing is I don't want to wear it down since I bash it all the time...What do you think? Because I also want to get new shocks, A-Arms front and rear, and a few other things...

What's the best way to go?

[chinkmaster000]

Hi, its really upto you. This graphite kit enhances strenght and removes excessive weight in the car. which could be a sound investment if you want more speed. Depends really what you mean by bashing? if its just crashin around at top speed then you mite aswell just stick to the standard chassis. Maybe invest in some GPM brand alloy arms because there strong, just incase u crash and damage the existing stock arms which are very weak.

[th3ha1og0d]

yeah thats what i was thinking too...i dont really want to buy a graphite kit and then bash it up...but I'll probably buy a bunch of other stuff (currently I only have the motor heatsink and aluminum driveshaft)

Take care and nice tt01

[SuperChevy446]

would you reccomend it for drifting?

[hayabusafmw]

did you use the same parts from TT-01 stock into this one like Differential or you bought alluminuim ball bearing ones??? im wondering cause i got everything xept that and i dunno if i should build it now or wait....

since i built the ''STOCK'' tamiya today..

[chinkmaster000]

YEhh i did. Some parts are from the tt-01 racing chassis set, not the normal stock tt-01 set.

Its upto you really... but if its you first tamiya rc car, i would build it and give it a few runs to practice and then slowly see what you want improve, such as handling, weight, speed? etc

[Michalpleple]

Tamiya RZ :)

[Zero0091]

Can you tell me something about your engine ?

The name, price, and the quality.

Thank you very much =)

[chinkmaster000]

TAMIYA rz motor about 20GBP

[Hoser95842]

That looks great. Is the graphite chassis much stiffer than the plastic tub? Is the support bar really necessary?

[chinkmaster000]

yessss, and yes lol.. it provides added rigidty and stability at high speeds

[NITROCARBOI]

ite mate how mch is the hole conveson kit

[NITROCARBOI]

how mch is the grathite converson kit

[chinkmaster000]

approx 40GBP

[lizardmannnn]

eww opera techno lol.

[kiasu01]

chinkmaster... haf a question mate,

is the 3racing graphite pack also able to be used on the tt-01d? it somehow says only tt 01 and tt 01e?

[chinkmaster000]

hi, i think it can be used with the TT-01D aswell. The chassis are near the same.

[Legendation]

oops... My bad... at the end it says... Haha..

Ps: Anywhere where I can download it? :P

[chinkmaster000]

hahah its ok! ermm you can download it off limewire or ares.

Check out my other videos on my account. Thanks

[Legendation]

May i ask you, what is this song? Its so cool, like your car... I wish I had your car... :P.. Looking forward to hear from you.

[djwickem90gy]

whats the song!??? plz answer i love it

[BasNirvanaFan]

Yes you need a new motor like the tamiya rs-540 motor (engine?)or I've you want to have a better one take a tamiya super stock tz. You need then an alluminium proppelorshaft and a new controller too maybe soft springs would be better too! Just take the tt-01D. (D = Drift) That is the best one for you

[Craiver23]

Is this the best chassis for starters?? any suggestions for a newbie like me?i want to drift do i need somthing to make my stock car drift?please help

[chinkmaster000]

i would recommend a standard tt-01 or a tt-01drift will be a good place to start. feel free to ask for more help

[Craiver23]

If i change the stock motor, do i need to change the speed controler?i want to make all my parts aluminum?do you have a list of parts?

[chinkmaster000]

firstly you mite need to change to a decent speed controller which can handle the new motor, should find one which copes with the number of turns in your new motor.

The parts are not all gonna be aluminium, some will be titanium and graphite etc

if you want to know more message me on my account

[moptop1004]

how much would a average TT-01 chassis cost?

[jeramii21]

its about 300 in aus.! but check on ebay its much more cheaper

[Mcintee09]

go hpi there the best i have 3 cars the hpi rs4 mt original rc10 and this car n my hpi is the best trust me there the first time i raced my hpi i got 3rd place

[BasNirvanaFan]

( With more hop ups than you :$ haha:P

[BasNirvanaFan]

I have now my graphite conversion kit ! I've build it today soo maybe tommorow a movie chinkmmaster;) Byeee

[kanickl92]

very nice

[marco19931821]

ohh sorry i don't see the end of the videoo sorry thx xD

[marco19931821]

hi, i don't speak english very good because i'm italian...

your car is awesome i like it so much!! 5/5

and what's the name of the song? ^__^

[MohHageen]

is the pinion gear not covered by anything?

[chinkmaster000]

nope thats one of the bad things

[basskater123]

Hey chinkmaster000, my english is not good. I'm only 14 and dutch :P I get the graphite conversion kit about two weeks. but my question is. how do you screw that hexagon shape things in the chassis? Did you get a hexagon shape tool set or something like that? cause I don't have a heaxagon shape screw thing :P Or can you buy them in a shop? please help xD thanks:P

[chinkmaster000]

Hi basskater, yes you need the hexagon shape screw thing! and yes you can buy them from a shop or from ebay! hope that helps ^_^

[99876654]

oh yeah btw what diff does it use:the stock one or a ball bearing diff? nice vid 5/5

[chinkmaster000]

i think you can use either

[99876654]

im thinking of getting one but does the battery wobble a bit?

[chinkmaster000]

the battery stays on fine, as long as you strap it in with the velcro tightly and dnt do insane jumps or extreme crazy driving. But i havent realli had a problem with it

[G4guy]

Why use GPM bumper???

[chinkmaster000]

its not a GPM bumper? its the 3 racing bumper that came with it ¬_¬

[Knacke30]

Hi!

Was it hard to install the kit?

[chinkmaster000]

it was ok!! not too bad! ermm they dnt use standard cross screws.. they use those hexagon shape end screws if u understand?

[CTEK121294]

ok might get it soon

[CTEK121294]

Hi by the way can u still use tt 01 hop ups after doing the conversion kit .like stabalizing Rods and etc

[chinkmaster000]

yeh u can. not too sure about stabalizing rods tho. Ive upgraded mine with hop ups after i did conversion kit anyway. mite put a video up later

[husso1981]

what comes with the chassis ? is it only the bothom or are the screws included ?

[chinkmaster000]

yeh it comes with screws, upper and lower graphite frames and new gear boxes

[husso1981]

where can i order this ? I'm from belgium

[chinkmaster000]

from ebay

[tt01mamba]

where did you get those rear upper arms??

they look like beefy blue turnbuckles

[chinkmaster000]

i got it from the tamiya tt-01R chassis kit, i had that kit before this conversion kit chassis

[JJSID]

does the kit come with new differentials/gear box or were the stock ones used?

[chinkmaster000]

well no, u need to put ur old ones in or get sum new ones.. i used the gears from my TT-01R chassis gears inside

[VinyGambini]

i dont see anything stock in this tt01 :) u probably can built another one just by gathering the old parts lol :)

[bobbz16]

wats the name of the song

[thomaslock]

that is a fucking sick car mate

[chinkmaster000]

thanks man, im gonna have a video of this car in action soon hopefully and a video showing my new car shell, just bought so it may take while for a video

[PaulinhoThompson]

So does this kit actually make the car lower and lighter ?

[chinkmaster000]

yeh it dus, its also stronger and the air flows more smoothly throught the kit

[hdotkiddle]

r u gna do a video of the car in action?

[hdotkiddle]

what is de ground clearance like is it lower than the original

[chinkmaster000]

yeh it is lower than the original, much lighter, and it looks ***kin nice ^_^

[hdotkiddle]

dat car is bangin i'v got dat conversion kit myself i am building it soon

[WallaceNg100]

can u take a movie of driving it?

[chinkmaster000]

there will be one later, im still upgrading sum bits over christmas