Well R2 Vz.61 Skorpion Airsoft Review Part 2

[GameTechX]

nice reiews love the channel

[zombiebeast92]

How much did u get it for?

[aderonn]

@zombiebeast92 $90 about 2 years ago.

[321jordanb]

@aderonn would you recomend the jg one or this one

[aderonn]

@321jordanb I can't say for sure as I've never used the JG, but from what I've heard, the JG seems to be better quality.

[thegamer1242]

well he should have gotten a v61 skorpion not a r2 one

[aderonn]

@thegamer1242 I bought this before the JG verison was out.

[tretey]

Can you do a review on the WELL R4 Mp7?

[FlameByxis1]

how many airsoft do u have?

[aderonn]

@FlameByxis1 I have 17 or 18 guns.

[FlameByxis1]

@aderonn fast reply!

[DKbest123]

how long does the battery last in a skirmish game

[aderonn]

@DKbest123 a couple thousand rounds from my experience

[LaCedric402]

was it shipped to you?

[aderonn]

@LaCedric402 Yes. I purchased it from Evike (california) and It was shipped to me (florida) in about a week.

[lilty402]

oh how much



[drqwdrqw]

Why would you put a sling on a small smg that's why there's no sling mount

[aderonn]

@drqwdrqw If you're using it as a secondary, it makes sense to have a sling so you can use both hands for your primary

[LaCedric402]

Where did you get it?

[aderonn]

@LaCedric402 I got mine from AirsoftGI. I'm not sure if they have them in stock, but I know evike has them in stock at the moment.

[TheGermanshepherd101]

Wow this is bull bro but ur right about da gun

[Jaarrred]

I just ordered this. So excited! :D

[prigel]

@Jaarrred

I'll order it in about 2 weeks, can't wait :) Goes perfectly with my Dragunov

[assassineater145]

which gun would u recommend vz -61or gas blowback pistol

thanks

[aderonn]

@assassineater145 It depends, I'll talk to you in private message.

[baseballfanairsoft]

Press F13 2 skip ads



[bleacxxx]

how fast does it shoot with .2s PLEASE REPLY

[aderonn]

@bleacxxx With .2g bb's, the bb's reach out to about 100 to 120ft.

[masn121212]

how much was it

[aderonn]

@masn121212 Evike has the JG ones for $88 right now, which is the only skorpion you can get. Unless you want to spend $290 for the TM one.

[adweapons]

How much was it and where did u buy it?

[aderonn]

@Arny19cz I charge mine for 2 hours.

[theginkgo96]

hello, i want to buy a scorpion because I need a small machine gun, in fact my g36l is too long and awkward in some situations. I have heard that has a capacity of half a joule ... horrible, I would not buy a crap like that, so I wonder if this "urban legend" is true or not. please reply thanks:)

[aderonn]

@theginkgo96 Mine shoots at about .8 joules or so.

[Ax07605]

Do use it as a primary or a secondary and I need something that I can fit in a backpack because i go to a friends house to play and I can't be walking around the Neiborhood with a big m16 or ak so ya

[aderonn]

@Ax07605 It works great for a cqb weapon and i wouldn't feel at a disadvantage using it as a primary.

[mistabigz271]

would this gun be a good starter

[aderonn]

@mistabigz271 Yes it would be. Just be sure to buy some extra high quality .20g bb's with it because walmart bb's will jam in the gun.

[mistabigz271]

@aderonn Ok i waz thinkin of using my 12.grams dat wouldn't have been good XD

[just6262]

I am thinking about getting this gun but what are the magazine capacities

[aderonn]

@just6262 The stick mags are 50 rounds and the drum mag is 300.

[stevo241999]

thanks



[ReviewforBlooman]

What material is it? Steal or Plastic

[aderonn]

@ReviewforBlooman The upper receiver is plastic and the lower is stamped aluminum.

[airsoft4839]

how much dos it cost

[aderonn]

@airsoft4839 $90 to $100 depending where you get it.

[stevo241999]

with electric guns do you need a battery and charger of just one of them

[aderonn]

@stevo241999 all electric guns need batteries.

[trigon525]

I would like to know if it is possible to install a tight-bore barrel in this and what size it should be. And if anyone has found a disassembly video for this gun it would be very much appreciated. Anyone who wants can pm me the message. Thanks in advance.

[aderonn]

@trigon525 idk if there are tight bore barrels for this, but the barrel is about the length of a regular pistol barrel (close to 100mm). to take the barrel out, you have to first take the stock off, then next to the magazine well, there is a small hex screw that you have to take out. after taking that out, you can pull out the pin right above that hex screw. after taking that out, you can slide the upper and lower receiver apart. when you put it together again, be sure not to pinch the wires.

[123fire77]

@trigon525 why would you wanna put a tight bore in this? tight bores are terrible on full autos only good for semis

[CalebLovesToRead]

Doesn't the stock fold outward?

[aderonn]

@CalebLovesToRead yes it does. you can hit it upwards and it will swing over the top.

[runefigter5RS]

wauw! FUCK DAN WESSON 6" im getting one of those!

[1107984]

is it posible to detach stock and what materiel is it made of? thanks in a advance!

[aderonn]

@1107984 it is removable. you just have to pull out a little pin and it will pop out. the stock is made of metal.

[futurerev21]

is diecast good or bad i forget

[aderonn]

@futurerev21 its not as good as cnc machined but its better than most plastics.

[futurerev21]

@aderonn ok, whats the best metal for airsoft guns to be made of and still affordable

[aderonn]

@futurerev21 there is no best metal really. different things need to be made of different types of metal to be effective. basically just stick with high end brands and you will be fine. a new trend is to use nylon fiber, which is like a really strong and really light plastic. its more effective to use for some guns than metal.

[mightystu49]

WHERE CAN YOU BUY THIS GUN? I really want one, but everyone is sold out.

[ModernWarfareOfDuty]

Hi. I never had any softguns before, and I'm getting this one, so can you tell me of some good grips and where I can get them? :)

[aderonn]

@ModernWarfareOfDuty i will send you a link in a personal message.

[GTAIVPC2]

Isn't the rail ONTOP of gun the Buttstock?

[lNike32]

can u send me link where u got the grip plz and what bbs are the best for it/ battery

[aderonn]

@lNike32 ill send you a link in a personal message of some good grips. and i use .20g high quality bb's. brands like KSC, TSD, and G&G make good bb's. and the gun uses a custom AEP battery so there isnt anything better than what comes with it.

[lNike32]

can u send me link where u got the grip plz and what bbs are the best for it/ battery

[lNike32]

can u send me link where u got the grip plz

[lNike32]

i can pick any grip and it will fit? doesnt matter wat brand?



[aderonn]

@lNike32 any grip meant to fit weaver rails will fit.

[lNike32]

i can pick any grip and it will fit? doesnt matter wat brand?

[lNike32]

where can u buy the grip for it at? i got my gun off evike so ya where can i get a grip for it?

[aderonn]

@lNike32 evike as well. go to accessories, then vertical grips (middle column, last item), and then pick the one you want from that selection.

[PokemonGuitarHeroFan]

have 3 questions

in which country do you live?

where do u get the gun?

where do u get the grip?

[aderonn]

@PokemonGuitarHeroFan i live in the US. i got the gun and grip from airsoftGI(dot)com

[XDigger56]

I use the stick mag as a grip ._. is anything wrong with that?

[aderonn]

@XDigger56 no. but i like to use the drum mag and that is a bit awkward to hold as a grip.

[zachybrady159]

wow that helped me out alot im glad u told me all of this i was about to get an tommy but not anymore

[aderonn]

@zachybrady159 the tommy will probably be more accurate and have a longer range. as well as it shoots harder. but this is cheaper if your on a budget and a heck of a lot lighter and way more compact.

[promotecheese2010]

my impression is... it's a peice of crap.

are there any better skorpions by other brands, to your knowledge?

[aderonn]

@promotecheese2010 Tokyo Marui makes one. But those cost over $250.

[xxABIGBOYxx]

i need a new gun to replace my jg bar10

i will NEVER support JG again

[benchokwaiman]

love your intro man!

[killerkid6424]

how much did this cost,,??

[aderonn]

@killerkid6424 i paided close to $100 a year ago but i think evike has them for close to $70 or $80 now.

[daniel997799]

czech army!!!!!!!!!

[PWBMusic]

Does it have good range? I'? justy starting airsoft is this a good gun for beginners.

[aderonn]

@PWBMusic yup. its a great little gun to start with. you can hit a man sized target at about 100ft with a little burst.

[saj12100]

doesnt die cast mean its cheap metal?

[DRAMADORK1997]

i got the same gun full metal body 400 fps

[SpetsnazO8]

@DRAMADORK1997

what brand/name and where?

i been thinking about getting this wellfire version and installing a better spring but shoot if i can just get a full metal one and 400 fps, makes it much easier

[DeltaM97]

can you put it in a holster?

[aderonn]

not a normal holster. its too big. without the front grip or magazine, you could probably fit it in a desert eagle holster or something if you took off the stock. i have seen mp5k holster online, which are just really big holsters meant for SMG's

[Joshua1234gf]

@aderonn  it looks sicker without the stock

[tommo6930]

is that gun powerful

[aderonn]

no. it only shoots about 270fps. but the rate of fire is pretty high and its got a high mag capacity for being so small. great for both backyard games and cqb skirmishes

[MercenaryAirsoft1]

awsome review man

[skaterkid321504458]

im not sure but the sling mounts might be on the batcover

[aderonn]

on the real steel i dont think it is meant for a sling mount but if you wanted to you could. but i highly discourage it because if that piece breaks, it would be hard to find a replacement and your battery could fall out and it is sometimes difficult to find those too.

[skaterkid321504458]

@aderonn tru tru

[SeAnStAmOn]

A foregrip on a scorp is actually a really good idea considering the drum Mage doesn't have a handle and there is no area in front of the mag to hold the gun. And the foregrip helps control the bounce from the blowback of the weapon. Good idea on the scorpion to have one considering the badass rate of fire.

[lee9792]

wtf who puts a fore grip on a fukin scorpian mmmmm foool

[asbamsen]

Im using my well R2 as a primary sidearm (my secondary side arm is a Cz 75D compact) for my Cm048s, Its highly recomendable, its a very good Aep, as aderonn says, the best on the market. I would pick a well R2 instead of the TM M93r (blow back gas pistol) because its cheaper, its reliable and it does not have the problem of misfiring during the winter season.

[bakonlicious]

Does the stock fold out?

[TheJabarloo]

yes

[ck813]

yes it does

[Gmod10man]

The ak is bigger and prob has more potenshull (can't spell) I would recommend a dboys rk 101

[bigfanowarriors]

would u reccomend this or an AK-47?

[aderonn]

an Ak is more of a field gun. this is a cqb gun. it depends on in what environment you play.

[Gmod10man]

Technically it isn't an AEP, the actual scorpion vz.61 and vz.(insert number here) is a small sub machine gun. I really like this gun I'm deciding between this and a TM M93r pistol. TM had better quality and it's a good gun. Only $60 on evike I think

[aderonn]

wow. $60 is a good deal. i do agree with your idea about it not being an AEP but since it uses a 7.2v, most places classify it as an aep. even tho its technically not a pistol. same with the well r4 mp7

[aderonn]

airsoftgi

[I8DEAN8I]

plz make disassemble vid

[aderonn]

sorry, i dont disassemble my guns unless they are broke. im not very good at putting them back together

[I8DEAN8I]

I'm getting it

[aderonn]

awesome. you will enjoy it.

[zaglerules]

does this hun have threads?

[aderonn]

it does but they are very weird. they are 14mm counter clockwise but they are inside out. they are on the inside rather than outisde. also they are end right before the skinny barrel so you couldnt put an adaptor on it and a silencer because it wouldnt extend far enough to clear the stock when folded. ill make a video on it as soon as i can to explain it better

[zaglerules]

thanks cuz im thinking of getting this gun

[aderonn]

no prob. im gonna make the vid tomorrow but ill tell you right now, the only way to really attach a silencer that i know of is to get one of the silencer adapters that comes with the tokyo marui or JG versions of this gun. they arent sold separately so your going to have to find someone willing to part with theirs. but you can always make your own silencer out of pvc pipe or medicine bottles and i think it still looks good

[zaglerules]

thanks

im really hoping to see the video

[ajsnuker]

How many rounds do you have through it approximately?  Still running good I assume?

[aderonn]

well today i used it again and ive shot about 1400 to 2000 rounds thru it total and im still on my first charge. the rof is still pretty high. i havent had it long enough to see any mellowing down of the fps or rof. still seems to be in tip top shape

[ajsnuker]

kool, Give me ha holler if you remember after about 15k rounds. It seems all my AEG's go through that in the first 3 months on me =/

[aderonn]

sure thing. i dont play too much. i probably havent gone thru 25k rounds total. being that i only get to play when my friends come over and when i have time for target shooting

[JACOBxxx909]

do u recommend this or a t3 for cqb

[aderonn]

if by t3 you mean the JG t3, then this. the jg t3 is a bit long and shoots too hard for cqb. could you clarify on which t3?

[JACOBxxx909]

im sorry jg t3...well thanks

[aderonn]

no prob

[settah17]

hey what kind of motor does it use?

[aderonn]

sorry, im not sure. i dont know much about the internals and workings of guns.

[multipleXchickins]

great review thanx

[aderonn]

no prob

[Y07McKennaH]

fire it more nigga

[aderonn]

i have a shooting test coming out this weekend

[aderonn]

i posted the shooting test video. check it out

[tipsymouse21]

sup bro awesome review and gun just wondering though how much was it all in all including the fore grip and other stuff

[aderonn]

mine came out to $109 on airsoftgi. That was with free shipping and a 12% off coupon code. the code isnt usable anymore so it would come out to about a little over $120. but there is a cheaper vertical grip. i just got this one specifically because it had RIS rails on the side.

[ScaleyGuns]

on evike its like 75

[aderonn]

cool. im not a big fan of evike. im sure they are a good company, im just not a big fan

[porkchop1332]

lol i think he mightve meant to say that gun is sick

[aderonn]

yeah he did. lol

[ScaleyGuns]

oh shit!!! I swear to god i didnt mean to say that i promis, i ment so say that gun is sick(the "i" and the "u" are right next to each other other srry, but ya and the rate of fire is inssain on a mini like that and the battery have to be the cookest thing

[aderonn]

oh haha lol. yeah its pretty crazy. im not sure how long the battery is going to last. most ppl say it lasts like 600 rounds but ive been thru atleast 700 to 800. the battery is 400mah but im not sure how many bbs that translates into and im sure it differs from gun to gun. i might play airsoft with my friends tonight so im going to see if i can run the battery down today and then charge it before our game.

[ScaleyGuns]

that gun is suck, i was gunna get it but instead i decided to get a hfc blowback gas mini uzi

[TheFallouts]

awesome full review, what would you rate this gun outa 10? and would you recomend this scorpion, over some of the other ones out there?

[aderonn]

i would give it a 10 out of 10 considering its size and its an aep (7.2v battery). for what it is, its amazing. its not going to be comparable to a full-on field aeg but it will definitely uber pwn some noobs in cqb if ya know what i mean. lol. great gun. great sniper side arm too.