You don't mate you should be using the following settings in iRPM to get it to work properly (NOTE: shutdown feature doesn't work)
To wake on LAN:
Go to your computer BIOS and make sure you have the LAN power up mode ENABLED.
It'll be under POWER SETTINGS/OPTIONS >> Power Up via LAN (Wake on Lan) = ENABLE!
Now that's done, just switch your PC on and make sure your iPhone is connected to the same router LAN. (Ethernet connection only for PC!) The settings should look like this:
@Gammapack267 I think you need to be a little bit more explicit. Based on your comment I think what you are asking is how do you forward your port. You need to login to your router. It should be port 9 on UDP. So set this up to forward to your computer which should be a static IP. If you have further questions don't hesitate to ask.
can u show me how to set it up please i didnt understand haha sorry bro
O5CARTHECOOLIO 7 months ago in playlist Tutorials
uhm i gonna make it but on wan is the shame only ur need a dyndns nas server
korkoisultimate 1 year ago
Let me know if you get it working.
Step 1 is BIOS SETTINGS in POWER SECTION to WAKE OVER EXTERNAL MODEM OR OTHER SUCH SETTINGS
Step 2 is to FORWARD PORT in ROUTER SETTINGS on UDP PORT 9 to STATIC IP OF YOUR PC - ENSURE IT IS STATIC THROUGH OPERATING SYSTEM
Step 3 is to CONFIGURE iRPM APP USING PORT 9 and your MAC and IP ADDRESSES
GOOD LUCK!
adampollack 1 year ago
can you show me how to do it because i so confused about it
thanks
pcgamesevo 1 year ago
You don't mate you should be using the following settings in iRPM to get it to work properly (NOTE: shutdown feature doesn't work)
To wake on LAN:
Go to your computer BIOS and make sure you have the LAN power up mode ENABLED.
It'll be under POWER SETTINGS/OPTIONS >> Power Up via LAN (Wake on Lan) = ENABLE!
Now that's done, just switch your PC on and make sure your iPhone is connected to the same router LAN. (Ethernet connection only for PC!) The settings should look like this:
gam35guru 1 year ago
Target PC Info:
Name: name it anything
Host: ROUTER IP ADDRESS (example: 192.168.1.1)
Wake on LAN Config:
(Go to your router homepage and check the DEVICES part you'll see your MAC address there)
MAC: 00:1a:90:21:4a:19
Port: (Don't put ANYTHING here)
Broadcast: ON
gam35guru 1 year ago
how do you find find the thing to fill into the "Port:" thing on the
Wake on lan Config?
Gammapack267 1 year ago
@Gammapack267 I think you need to be a little bit more explicit. Based on your comment I think what you are asking is how do you forward your port. You need to login to your router. It should be port 9 on UDP. So set this up to forward to your computer which should be a static IP. If you have further questions don't hesitate to ask.
adampollack 1 year ago