"Mod Men" Show Episode #5

[p3vvp3vv]

Instead of Using a gigantic cpu heatsink ... you could have used a water cooling system with the radiator on top of the case .. I mean the top of the case is actualy made for that.This way you can have all 15 fans (2 in the radiator) running AND if you add some blue dye in da water you got a real chick magnet buddy ;p

[obi121]

try using a smaller cpu cool or a Corsair Hydro Series H100 ;)

[MoorePC1]

If you really want to have fun with the Lanboy Air, take everything out of it except the 15 fans and the power supply. Turn the fans on and use it as a bird cage.

[lllD3CRYP70Rlll]

great great use a rodent trap!!!!!!!!!!!!!!!

[lllD3CRYP70Rlll]

ear plugs seriously ROFL

[lllD3CRYP70Rlll]

cluster fuck of fans and then you gota cluster all your hardware

no no no

HAF X CoolerMaster

[CradleComputers]

i still think the nzxt switch 810 is the best case out there shy of the $300+ cases.

[infrinous19]

you should pick the shittest mid tower and trick it out with a top end gaming and watercooling

[mlp12456789]

Can you PLEASE make weekly episodes!!!!!!

[CustomPcTech]

Dude that custom case is off the hook!! You guys are geniuses!

[weskersification]

can i have the lamboy case?...please?...

[t00fatt]

Best show on youtube hands down!

[ItsTheAlfred]

This was much funnier than I expected BANANA!!!

[bensheeboi]

i think it would of been cool to include the res in the acrylic stand thing that held the radiator. Also when are you uploading more videos?? its a great show:) well done

[Jessescustompcs]

If you want to see a real case... that isnt built out of a conex box with some lego's thrown in to appeal to children. Check out my channel, Mountain mods ascension case, FULL aluminum. Dual gtx 590's with a complete custom ONE-OFF water cooling loop.

[SniperTeamTango]

If you hadn't used a ridiculously large CPU cooler you could have fit the fans in XD. Its a good case if you put some thought into what you put into it. Also if you think 6 screws is a big deal, I advise you not use computers from pre 1980. Was glad to see 6:25 come around where the antics stopped. (And yes, I will give you that the cable mess is that, a mess.)

[PuReMiNeCrAfTeR96]

20 people had shit pc's :P

[Tech4U247]

@PuReMiNeCrAfTeR96 22 :P

[wodka450]

i cant believe thats the only one... i want one like that, it looks so awesome... wish i had any kind of modding tallent... might make something amazing from my elite 330 case.

[WeAreTwoDoorsDown]

However, this would be a watercooler's wet dream...

[RetroGamerr1991]

Please do more!!!

[rakib567]

did u buy the motherboard and video card?

[sigve619rey]

SEASON 2 PLEASE!

[foodtrip2211]

Oh deym, I thought you guys posted a new video... :(

[tholoz]

first 5min of this video was pure awesome comedy. Money down the drain case! Please take a look at the "Thermaltake Level 10 GT Big Tower" Another plastic wonder that hypnotize kidz to buying it. /cheers

[MonsterMawd]

@tholoz, Thermaltake offered one to me. I ignored them. Thanks for watching and commenting!

[0peppers]

@MonsterMawd Thermaltake are mainly awful.Though from what I've seen the level 10 gt isn't too bad. It might not be good for moding and it does have too much plastic for my taste but it's a decent case. Also Thermaltake are one of the few out there who use the contact fans for the side panel. Very convenient feature. Price is still too big though.

[HeWhoIsBrave]

Your show should be on Spike!

[MrDylank31]

Have you ever heard of Slim fans? Thats how you get all 15 fans. And you dont have to use a huge cpu cooler. It sounds like to me that you just dont like the case. I personally love my Lanboy Air.

[2ML6]

Very NICE Very COOL!!!

I want to request!

I have alienware aurora R3!!! and i want to modified its case!!!

because its gettting boring!!!

so i appreciate if you can do some modifiction using alienware R3 case!!! tnx

[phase909]

... entertaining review... great upload.. lol

[sk8er065]

so is it a bad case cuz i was about to order it

[Trynage93]

Why the fuck is he bashing Antec so much?

[Indickua]

THE BIGGEST FAN ON A PC EVER! IN A FREEZER!!! NEXT MOD MEN!

[docsis3]

I love my mushkin hat

[phillip2680]

Bill! we need mod men season 2! :D

[Stalinx20]

3 jagermeister shots and 2 monster energies have given him the courage to finish that system install. hahahahahaaha

[crazy88boss]

From now on when my cat is being naughty and sleeping on the furniture I will put him in a Lanboy and turn it on and let the 100-decible airplane noise set him straight. Thanks for the suggestion. Though I wonder ... if it works for kids? Clean your room, Charlie, or you're going in the Lanboy! Don't sass me boy or so help me you'll be doing cable management all day!

[skotten90]

Haha sweet custom case i must say!

[Stalinx20]

6 screws to take the side panel off. how convenient.. lol

[Stalinx20]

spending most of your day organizing your fan connections......hahahahahahaa­...

[smbjork]

Best Antec review ever.

[element180gmail]

Beautiful case...NOT THE LANBOY FAIL (I mean Air) 

[LPRaver89]

Every time I watch this I laugh the entire time you are reviewing the lanboy air. If only LED fans did pick up chicks.

[mikeallensonntag]

Lmao, This lanboy is such a mess to cable manage. Lol bill you crack me up.

[WTFwood]

This guy is a moron. Its a fucking LAN case. You arent supposed to put the biggest fucking heatsink you can find in there.

[nickum32]

@WTFwood Just because it has LAN in the title does not necessarily make it a LAN case. This is a mid tower case, which is a lot of work to haul to a LAN party. Antec might make you think it is a LAN case, but that thing is just too big for a proper LAN case.

[aahhmmeedd112233]

Water cool it youll fit everything.. I think

[vinceqwerty100]

very very cool rig ;)

[djsweetthing]

I've seen 15 fans in one of these cases but you need to use a few of the slimmer fans in order to fit them all in.

[Ceadderman]

@djsweetthing And put a board no bigger than a Micro ATX in it too. ;p

[SamBarronSleep]

wtf do you expect when your heatsink is fucking HUGE

[TofuSagaX]

where can i get the thing that makes ur pc spin?

[martinhiebert]

build a ultamate gaming pc (well as wild as one could go) in a modded out to the max antec 300 case (painted or milled pieces ect - modded to a "classic shooter game like doom 3 or quake 4 themed"

[PenguInspiration]

@martinhiebert It would be difficult to fit the top-of the-line hardware in a not so top-of-the-line case.

[BOLDYOJI]

41.35 LMAO!

Cool vids,hope it turns into a long running series : )

[JoeyDrunko]

Wow, glad I didn't get the Lanboy Air. O_o

[fun4me23]

Lanboy air LOL

[hubbleISS]

I like the cage idea for the lanboy, the scary thing is when you took it outside it I think the bear actually tried to get out of it! O.o

The ModMen pc was awesome! Nice tips!

[cambro69]

loved everything about the series. literally cant say a bad thing about except it needs more episodes :D

[Heartl3ss21]

totally trashed the lanboy air...not that it didnt deserve this...that case sux...i admire your courage bill owen...tell us how many threats did Antec do to you?

[daviddoyle32]

Like the show but need more vids

[srcowle]

Nice job on the series, you should definitely do another.

I liked the painting tips, now I'm thinking of creating something to go along with the custom art sandblasting that I do. Any ideas?

[HereticExA]

Bill you guys need to make more of these videos. They are so informative. By the way I love what you do to that case man. LOL just throw it away.

[evantaur]

04:18 it sounds like chewbacca saying "hello" :-D

[micahellwood]

If you would like more of the dyes for your mods just ask and ill send you them for free :) -=Mayhems=-

[lestat692k8]

love the show must make more of the series

[MatthewDaviesParker]

MOAR!!! Loved every aspect of the shows, the design, painting, prepping, product breakdown input from all the guys, the Munkey bits with sexy scanlines were also genius. Would love to see some of the 3d modelling workflow and how you guys get ideas from, and how you work through that on paper or models. I honestly can't wait for more shows, please get some kind of major sponsorship as this needs to be on network tv as well, am already jonesing for more. Much love from England to you all!

[mdrumt]

Want more episodes.....these were awesome!

[DALYuseTAYLORMADE]

is that it? no more episodes ?

that was great tho

[AusiMoney]

tron pc i think it could be ur best ever it would look soo mean >:)

[Brainiac83]

Laughed my ass off at 4:47 and yes it is a bit of a failed design, but with some "back to the drawing board" it could be fixed.

[ace420bud]

Yep and that case is exactly why i will always go to Corsair or Cooler Master for my cases. cable management, space, and airflow is a must in any custom or gaming build for any PC. Very nice build there guys i LOVE the modmen PC you guys did a fabulous job on that. Has anyone ever figured out how to setup liquid cooling on a power supply yet? I mean hey why not it gets hot to rite? ( Never cared for Antec!

[Tangylives]

@ace420bud

P180/190. Back when Antec made decent cases.

[CubanIceCube]

So basically you're giving this system shit because you're trying to install an oversized aftermarket cpu heatsink and didn't take measurements? ... Opinion invalidated. Not that I would buy this epitome of design flaws.

[SinisterSkip]

Awesome own design and damn funny review of the fail Antec case :)

[3dkiller]

antec lanboy crap, no dust filters at all...... to many bugs and way overpriced.

[marton891]

only 5 chaps?

[jonndemainjr]

I just wanted to say Bill that I really enjoy your show I have been watching it now for about a year and have enjoyed all of the tips and tricks as well as the ideas you share with us. The custom MOD MEN PC was great but, my favorite is still the ENVIDA cube bulid you did awhile ago. Keep the episodes coming hope to one day have my own home so I can set up a shop and work area for my mods and bulids till then keep me in enlightened.

[onecrazymofo1]

another season of mod men Plleeeaaaassseee

[DreamvoidStudios]

I'd like to see a custom table for triple-screen setups!!!

[gaptoofgranny]

uh, what? hot as possible? um no. do that and it's likely to burst. better to have it very warm. not hot.

experience: five years in custom painting.

[Zomgwtfbbq1228]

finally someone who calls out that shitty case for what it is. thank you bill!

[yougotkicked]

finally got around to watching my way through the series, absolutely loved it. It rekindled my interests in modding (this happens every few months, and you are usually the catalyst), hopefully I can get a project started in the next month or so here as school finishes up.

[RONLEEC1]

I look forward to these episode, what a hit!!

[Polyuncoki]

I liked all of it!

[bluebroham]

I could use some more reviews in the next series. And a longer series!

[CraftYourWorld]

MAKE SEASON SIX OMGAWD MORE VIDEOS!!!

[Schmauges]

WOW Really NICE I love it !!

[lapulapu12345]

I want to title it as, the lan boy air epic failure..... :)

[gamerdude1989]

5th and final series???

Oww, carry on, i really love watching these vids.

[iPodAppsWalkthroughs]

please check out my build Monstermawd inspired me! /watch?v=CJUPavXlMdY

[Sabiancym]

Don't put die in your liquid...it's only going to cause problems later down the line.

[9kuuby9]

that's one fact but , since the massive airflow , we can say that dust will build faster even if the surface area is halved by the mesh holes.

[AsAnAtheistFilms]

@9kuuby9

Not true, if the intake exceeds the exhaust, it should keep the system pretty darn dust free. My system ran about 1 year without requiring any dusting using nearly 5x yate loon high speeds+a san ace 24v fan.

Check out Overclock and look for airflow guides.

[TheWhiteRose000]

Give you $20 for the Antec case, and I'll pay for shipping.

XD

[AsAnAtheistFilms]

@TheWhiteRose000

You can run down to a hardware store and pick up rat traps for a few bucks.

[TheWhiteRose000]

@AsAnAtheistFilms I'll be honest, it took me a min to get what you meant and when I remembered.

I LoL'ed.

XD

[knight1987]

dude i wanna come work with you guys seriously. pretty plz. :) keep up the awesome work.

[MasterNaruto1214]

What is that orange case in the background?

[wogboy818181]

I was just wondering whether I could cut out a side panel with an old bench grinder? If not I might have to do it by hand by using a coping saw since I lack in power tools. :S Thanks in advance to anyone who could help.

[t3hsniper]

Full towers ftw, I thought the lanboy was rather lame when I first layed eyes on it on newegg's youtube video. Hello dust anyone?

[miriveq]

show is awesome. i hope more episodes will come.

[homes24]

nice nice nice, followed since day 1, came out good especially the cable management. Looking forward to future builds and or tutorials.

[CcModz]

PLEASE do not stop this show. As a system integrator and modder I appreciate this show so much you have no idea. Its the best thing since sliced bread. I can understand that there probably isn't much ad revenue, but it has to be bringing more customers.

[MaximumMT]

haha, very nice build. 

[HydraGoesPro]

Yes, which nozzle, Bill?

[Malikuniversotomb]

Put a H70 into Lanboy and you will able to put all the fans.

[musicmaster111111]

how to do simple mods to your case

[brechan69]

Love Daz's custom painted 700D in the background (9:05).

Bill; I've done exactly what you did (at the end of the show), sneaking around snapping up old PC's from the trash...jeesh, don't people know it's illegal to toss PC's in with the common trash?

[johnny2timestiNy]

nice pc!! and there should with out a doubt be a season 2

[blkdog40]

The ModMen case looks great. Great spray paint tip too, will use that next time.

[lvanhorn2]

i want that last pc :D

[AttackOfTheThumbs]

I hope you guys do another series. It was extremely enjoyable following the build. The other parts were good, but the main build was the most interesting part.

[eclipsestorm1975]

sweet

[fallout330]

that's a hell of a mod!



[BryantJoy]

so totally no more mod man series in the future?

[yotchsy]

you just embarrased the company that created the case..

I like your videos .

[gctsang]

Great vid

[MonsterMawd]

it's a SHEEN PC ....duh, Winning!

[ipullstuffapart]

wow they are running out of funding... the intro was closing a case side panel...

lol 4:20 rubbing cables... i thought mnpctech was the lords of fan grills

the window PC is plainly epic, it deserves to be on a forum

the final modmen PC, its just amazing, congrats guys its an awesome job!

[SomethingOtaku]

This was great; you obviously put a lot of work into all aspects of the show and I hope you get more attention than it seems there has been on youtube. I think the main weakness of the show is that you're not making enough Mad Men references. Drop more Don quotes and perhaps a build could center on a piece of 60's decor? You're also gonna have to switch from Jager to scotch Bill, but it's all for the best!

[NpManny]

"Its all about getting good flow from your nozzle" XD thats what she said

[ardeleon09]

NOOOOOoooooooo!!!! It can't be the last show. Extremely nice custom build came out amazing. As for future shows like FrenkieNL stated the tips are a really big help. Hope to see more videos in the future even if it's just to show what you all are working on. Thanks for the information, entertainment, and inspiration to build truly custom computers. I wish all of you there at modmen the best in your future endeavors.

[dartavian74]

aww man no more videos.

i love the show. more videos on water cooling products would b gr8.

[khezier]

As for the Lanboy case you have to use slim Fans for it. its ben done on another video build.

[illshowuhowtoscream]

and i thought the lan boy looked good....

[xMrStrongCockx]

great show!

[pharaon92bc]

@xMrStrongCockx 

[FrenkieNL]

Like the quick tip, thats a sure winner for future episodes. Also I was pleasantly suprised with the LanBoy review. Not huugy huggy kissie kissie with any hardware manufacturers new product, no, you showed us the real pain in trying to get a normal system installed. Definitely big kuddoos to you and your team.

[Jacomaat]

that acrylic PC became FUCKING awesome! :D

It IS the most beautiful PC i ever saw! I didn't like the fanboy case at all! it is ugly and i seems like a hell to install everything in to it. sorry antec you failed this time!

[RetailSeries]

Please continue to make videos. Interesting informative and entertaining.

[Donkiekong76]

Love the ModMen PC and far as the Antech I think you just need to plan ahead.

youtube.com/watch?v=649kvK9bN6­o

[quigon87yt]

Omg! Poor Lanboy, and I really had high hopes for it.

You can use all 15 fans if you use: Smaller Mobo, Factory CPU Cooler, Small GPU,

A Dremel drill, some duck tape, Well you get the idea.

[quigon87yt]

Final Episode!

Now what are we going to do.

Need more Videos like this one!

[wdeborde]

"Final episode" What a sad addition to my day. =/

[transatlant1c]

love this show!

[Tacokiller10]

My heart sank when he said final episode

[JasonMediaCenter]

its good but way too many dust , how to clean those dust easily ? who can tell ?

[honeychook]

Awesome Show

[guilhermemavignier]

Don't stop!

[Dsmiffb]

SEASON 2!

[trick0077]

so slack to antec

[LegendofJonnie]

I wish I could click "Like" more than once. Oh darn!

[dra90n8]

how much would u take for a costom made waterblock that covers bouth the Cell cpu and gpu in the old PS3 60 gb verison?

[MARKO4166]

We need more Mod Men Episodes !!!! THUMBS UP IF YOU AGREE !!!!!!!

[l2Bubble]

that case review was awsome. definitely like to see more reviews of cases, but also other PC stuff, maybe watercooling products or something modding related like cable sleeving, ect.

I hope theres a season 2, i enjoyed watching these.

[brett1234]

haha this is the funniest computer video ive seen yet. ill ty to top ya.

[juhyuneei]

could you get any bigger CPU heatsink I mean seriously....

Bad choice...

Is that a Passive Heatsink? Why not go with H70 or something lower profile and newer.

[alexconingham]

this has been around for a while in Aus, it's really a piece of shit ey lol...

until you guys get a hold of one...

[WestCoastMods]

That turned out awesome.....But of course I didn't expect nothing less. A big shout-out to all the guys at the MOD-MEN!

[quaz18]

i do like seeing the installation of the cpu and cooler and stuff, even if its sped up or something.

[girtha1134]

No more mod men? That sucks! By the way what happened to biomechanical case

[FailLikeAChamp]

WHy would you insult Antec like that.. Im dissapointed in you...

[connortimoti]

I liked all of it

[kann1alles]

rofl that promo. tower cost twice more than the built in hardware

[xmodmodifier]

more "mod men" episodes, more warranties getting void...

[bogus33333]

lmao I wonder what Antec thought about this video, did they take it personally or not?

[nicktheodorou9]

more more more

[Hungerth]

I personally wouldn't recommend getting the water "as hot as possible" when heating pressurized spray paint in an aerosol can. :{

[nbwshowtime]

You guys did a bang up job. More reviews would be great. Just do more shows! I'd love to see a contest where viewers can submit PC designs and you guys build them.

[crashmasher]

hey, where can you get a large roll of that tape?

[bobobano]

1:43 "Specially sized thumb screws", kind tells you this is a fail right there, dont it.

[hackneo64]

I second the notion of Revision 3

[tyrt100]

I do the same when I'm driving around... see someone toss their computer on the side of the road, I'll pick that thing up and see how creative I can get. :)

I don't know if you guys have this already, but love to see a live Q&A with other mod guys, maybe get some special guest to visit and help mod a case... something like that.

[brandonbriggs]

Def want to see more MOD MEN!!!!!!!!!!!!!

[zangarkhan]

Lol i watched 7 min of Lanboy air get shit on then another 7 min of awesomeness. I would like to know more about your CNC and CAM program u guys are using.

[cavemanleet]

Great series and the modmen PC looks fantastic.

cant wait to see if you make a 2nd series.

...off to register on modmenshow