1) I got 2 10 Kickers....the RMS is 400....da peak is 800...........they hit pretty damn hard IMO..........and woooooooow at the person to say Crossroads is a lame song.....thats just something
i have been in car audio for a long time and the cvrs can only handle 800 watts rms a pair. NO MORE trust me had some before. The amp is way over rated if you want true wattege go with pioneer, alpine, audiopipe, or rockford fosgate amps.
i have the same subs, box and truck. im getting all of it installed after christmas and ill post a video response. i also got lights that flash 7 diff colors when the bass hits and pioneer 6x8 inch 4-way speakers with high end tweeters
if ur lights are still dimming when u are using the right stiffening cap for it. get a stronger battery (optima yellow top). if still dimming, then upgrade ur alternator. usually under $300.
well... shut up haha. i got a 12" CVR and it ain't shallow mount. And i googled it and all that came up was "Shallow mount CVT" not CVR. Ive never seen a CVR listed as "shallow mount." But w/e u say man, i mean im just a young grasshopper anyway lol
i have seen them as shallow mount but they are not, the shallow mounts are cvt subs they probably say that because cvrs are shallow compared to other subs
haha yeah i have a 4 farad cap. what I need is a bigger alternator, but I got newer truck and got rid of system and goodies in there :( haha but new truck = new possibilites :) the amp is minimum 3000 watts RMS.but amp turned down because i blew the first set of cvrs lol.this video is the turned down amp.shoulda seen the first set,damn flexed much further.lol but they went kablooey
i have those subs they are rated for 400 watts rms...ur guna hurt ur subs that is to much watts their specs are....400watts rms...and 800 peak...they are not supposed to handle peak all the time its not good for them eventually they will blow and they sound better at rms because at peak ur stressing the speaker to its limits...
If you still had the truck, I'd say upgrade all your power wires to 0 gauge and then go 0-2 gauge on your "big 3" and that would get rid of the dimming. Sucks that you sold it! I sold my truck with my system too :'(
haha it had 0 guage thru out da truck,added a 5 Farad stiffie to it,still dimmed.I needed a bigger alternator. haha now I gotz a Black 2006 lariat.better ride
amp is turned way down,subs couldnt handle any more power to it.minimum is 3000 watts @2 ohm load,(thats wat the subs are wired at)i used 0 gauge wiring with a 4 farad cap (boston acoustiks)thats not enuff either,i need bigger alternator,lights flicker like bass lights. so 1500 to each sub.
I'm glad you've realised it was the alternator and not the capacitor. These aren't shallow-mount subs, just thought I'd like to point that out. They have the same mounting depth as the CVXs, you should try and get hold of a pair of CVX 10s if you want subs that will hold up on that amp. And finally, is that a sealed box?
my mounting depth for subs is 4-3/16". the cvx mounting depth is 5.94 In. too big for little box, and they are only 4 ohm loads.the longest my box can handle is 5". my box is from baswurx,and it is enclosed.i am going to fibreglass some 12's in the rear doors,chec out the otha box i designed,its unda therrienh.anotha panty droppa. :)
sounded dam clean
DynamikT 1 month ago
The camera makes the speakers sound shity! Nice set-up
BigAlienProductions2 7 months ago
I say get Alpine TYpe r's and a Hifonics Brutus amp man shit would be ricking hard..
send2rahul 11 months ago
my 1 10 Memphis HPO 4 ohm sub beats harder and it 11 years old.... had 2 but one finally blew lol and they used to be my cousin subs
Longjohn555 1 year ago
Do they bump when you flip them over cause i was thinking of buying the same box for a 1998 f:150 Ford
gmlgm 1 year ago
1) I got 2 10 Kickers....the RMS is 400....da peak is 800...........they hit pretty damn hard IMO..........and woooooooow at the person to say Crossroads is a lame song.....thats just something
JDaKidd803 1 year ago
i have been in car audio for a long time and the cvrs can only handle 800 watts rms a pair. NO MORE trust me had some before. The amp is way over rated if you want true wattege go with pioneer, alpine, audiopipe, or rockford fosgate amps.
kittybath 1 year ago
U need. An. Optima battery u don't need another. Cap
SonicDeLaGhetto1 1 year ago
lame ass song
use108 1 year ago
3000 RMS watts my ass.. your 10 inch kickers woulda been blown when you pressed play.. more like 300
euroairlines 1 year ago
@euroairlines lol dont be hatin....go to earthquakes website......see fo yo selff foo.....
Krazyhorse24 1 year ago
@Krazyhorse24 idc what any one sez its a nice set up man ceep the bass alive
stl161 1 year ago
@euroairlines actually the kicker cvrs 10s are 400rms
AceNizzle 1 year ago
Comment removed
swangquench 1 year ago
what song is that?
impulse120291 1 year ago
@impulse120291 BONE-crossroads
jonathanhernandez76 1 year ago
i have the same subs, box and truck. im getting all of it installed after christmas and ill post a video response. i also got lights that flash 7 diff colors when the bass hits and pioneer 6x8 inch 4-way speakers with high end tweeters
phishphan225 2 years ago
if ur lights are still dimming when u are using the right stiffening cap for it. get a stronger battery (optima yellow top). if still dimming, then upgrade ur alternator. usually under $300.
Krazyhorse24 2 years ago
DUDE...best bass vid on youtube thanks to the music, 5* FOR THE OLD SKOOL BONE THUGS!
BasherCoon 2 years ago
whats the song you were playing?
impulse120291 2 years ago
bone thugs.....crossroads
deaconcook 2 years ago
lol those are not shallow mounts. CVT's are shallow mounts.
PoppinLikeOrvil1 2 years ago
lol yes they are. i installed them myself.. they measure at 4" 5/16.dats shallow lol.young grasshopper still gotta google search before u assume lol
Krazyhorse24 2 years ago
well... shut up haha. i got a 12" CVR and it ain't shallow mount. And i googled it and all that came up was "Shallow mount CVT" not CVR. Ive never seen a CVR listed as "shallow mount." But w/e u say man, i mean im just a young grasshopper anyway lol
PoppinLikeOrvil1 2 years ago
i have seen them as shallow mount but they are not, the shallow mounts are cvt subs they probably say that because cvrs are shallow compared to other subs
1Pueblito 2 years ago
nice system and nice truck!! i got a kicker system. check it out.
northsiderollers 2 years ago
you need 1 farad for every thousand watts
and i doubt your amp is maxed out since the kickers can handle i think 400 watts
so maybe you need a new battery before you get a new cap
paultakular 2 years ago
haha yeah i have a 4 farad cap. what I need is a bigger alternator, but I got newer truck and got rid of system and goodies in there :( haha but new truck = new possibilites :) the amp is minimum 3000 watts RMS.but amp turned down because i blew the first set of cvrs lol.this video is the turned down amp.shoulda seen the first set,damn flexed much further.lol but they went kablooey
Krazyhorse24 2 years ago
sweet excursion.
deathsight99 2 years ago
whats the name of this song?
TRICK43 2 years ago
"Crossroads" by bone thugs n harmony
Krazyhorse24 2 years ago
i have those subs they are rated for 400 watts rms...ur guna hurt ur subs that is to much watts their specs are....400watts rms...and 800 peak...they are not supposed to handle peak all the time its not good for them eventually they will blow and they sound better at rms because at peak ur stressing the speaker to its limits...
xxnissansilviaxx 3 years ago
dude he has a earth quake amp for gods sake its a cheap amp it isnt a true 3000 watts u can buy that amp for $125
1234567joelb 2 years ago
lol no i have amp set to 1/4 power. a nd without out the low freq. or itll blow sub fo sho.
Krazyhorse24 2 years ago
ok that still does mean shit.those subs are rated at 1600 peak im not saying its a weak amp but i know its not a true 3000 watts.
1234567joelb 2 years ago
yeah i wish the amp was that cheap, i paid 450 for it. i would like to get another one for my L7,
Krazyhorse24 2 years ago
did u see my other vid? (Bass shakers)
Krazyhorse24 2 years ago
If you still had the truck, I'd say upgrade all your power wires to 0 gauge and then go 0-2 gauge on your "big 3" and that would get rid of the dimming. Sucks that you sold it! I sold my truck with my system too :'(
Twest18 3 years ago
haha it had 0 guage thru out da truck,added a 5 Farad stiffie to it,still dimmed.I needed a bigger alternator. haha now I gotz a Black 2006 lariat.better ride
Krazyhorse24 3 years ago
u now those are tne cvrs right.
subw123 3 years ago
haha yuppers discription says comp vr series,lol cvrs for short.
Krazyhorse24 3 years ago
nice :D yo check out my stuff :P
TerrencExTAC 3 years ago
did you have to shave the box out any to fit those cvr's in the box?
maxxipoo1550 3 years ago
no i didnt have too,it was piddytight,but it was all gud, gud bass response
Krazyhorse24 3 years ago
What does it sound like with them faceing up or down, mtx makes a box that SHOULD face down, try it.
shaugs001 3 years ago
haha sorry I had em up from unda da seat,jes for viewing and drooling purposes.The box is from basswurx,and they are down firing.The box is enclosed.
Krazyhorse24 3 years ago
Bone Thugs-N-Harmony "Crossroads" hell yea yo I fuckin love bone thugs. you must smoke
playwithmywii 4 years ago
so do you have 1500 watts going to each speaker, or just 750?
TaylorFoodin 4 years ago
amp is turned way down,subs couldnt handle any more power to it.minimum is 3000 watts @2 ohm load,(thats wat the subs are wired at)i used 0 gauge wiring with a 4 farad cap (boston acoustiks)thats not enuff either,i need bigger alternator,lights flicker like bass lights. so 1500 to each sub.
Krazyhorse24 4 years ago
I'm glad you've realised it was the alternator and not the capacitor. These aren't shallow-mount subs, just thought I'd like to point that out. They have the same mounting depth as the CVXs, you should try and get hold of a pair of CVX 10s if you want subs that will hold up on that amp. And finally, is that a sealed box?
I've rated your video 5 stars btw :P
curlyfriesarenice 4 years ago
my mounting depth for subs is 4-3/16". the cvx mounting depth is 5.94 In. too big for little box, and they are only 4 ohm loads.the longest my box can handle is 5". my box is from baswurx,and it is enclosed.i am going to fibreglass some 12's in the rear doors,chec out the otha box i designed,its unda therrienh.anotha panty droppa. :)
Krazyhorse24 4 years ago