@FreedomlinkRadio Hi. Rotor is a 1 inch diam neodymium magnet N42 strength magnetized thru the diameter, from K&J magnetics, ( about $12 ) Schematic is available on other videos,and Google Rodin Coil group in files section.
25.000 rpm is awesome, Bedini meets Rodin, I get that, but what I don't get is the triangle on top, could u explain? Most of my girlfriends where Tigers, Myself, I'm a Pig :P
@SilverTissues The tetrahedral coil on top is a peripheral field checker sort of. to see where the best inductive effects are. I measure the a AC on the coil, also sometimes put it in series with the big coil to see what that does.
I hope a bunch of folks build these things and investigate. aloha
So what exactly can any of us do with the Rodin coil? Is the main use as a pulse motor driver? How much torque can we get from this thing does it react well under load? If I made a separate drive shaft with a bunch of magnets on it and engaged the coil would I get enough torque and if so is it more economical than a regular DC or AC motor? Is a DC brushless just as good?
@dmgcat I'm an expermenter, and find the Rodin Coil, Starship coil, Newman motor coils exhibit enhanced inductance effects over a regular solenoid type coil. The swirling B-fields in the center are impressive to play with. I do not know if they are any better than regular DC motors, or if anything useful will come of these investigations. Aloha
Also your gonna have to use Pulsed DC and a Sine Wave generation Program if you want any antigravitic results, that's how far Jamie got before he cut us all off. But if you look back on Bob Lazar's work he speaks of a certain frequency 7.23 or some odd used in the craft It is hard to recollect.Either way, excellent acheivement!
To answer one of your question, And please refer back to Marko's Vortex Math video, but the highest RPM comes when the coil centre is OFFSET from the center because that is where the VORTEX is located. If you look at the ennegram with the 1-9 on it, very simple, you will see the interesection point is NOT THE MIDDLE. So this is further evidence and backing to his discovery.
@DexLabb You are right, the highest RPMs are when the coil is shifted off to the side relative to the central rotor magnet. Strong mag fields all over stronger toward the center. This is a pulsed DC motor, but no sine wave added as yet.
@jackscholze You can start with ToneGenerator but there are many freebie software out there that might get the job done just as well just route it from computer to your gear
@morpher44 The tetrahedron coil is to measure magnetic fields around the main coil by picking up induced voltages. It is a downward spiral wind to be used later for the anti-gravity device :)
The tetrahedron is constructed of coffee stirrer sticks to give it an implied caffeine boost.
@harpbloke Later yesterday, fooled around and got it up to 30,000 RPM ! Screamer. The highest speed is with the coil center offset an inch ore two from the center, which is curious.
Hi Jack, its Faisal... This is because the lines of force are going into the vortex which should be in the center of the coil. The rotation of the magnet should be towards the vortex so if you have another rotter at the top of the coil, it would try to spin into the vortex also.
@skycollection I have one more neo-cylinder to maybe increase the torque. There is an energy recapture when using a charger diode off the collector of the power darlington, like in a Bedini charger. Just hanging an inductive load on it or a frictional load just increases the power draw as the RPMs go down under the load, as in a regulat motor.
and whats the purpose of the pyramid?
shukfahid 2 months ago
has anyone applied a load to a rodin set up yet? just wondering about the practical applications.
shukfahid 2 months ago
This has been flagged as spam show
it would be interesting to make a coil out of fibre optics !
shrodingersman 7 months ago
Does the hadron count in Planck as it walks the plank?
Good tidings to you.
crazy8sdrums 1 year ago
Genial, very cool your engine.
Greetings.
delcopond 1 year ago
This may be an ignorant question, but why couldn't you hook this up to an alternator and have it power itself? Very cool by the way.
bumgahdna 1 year ago
Fuck me man, fuck me sideways!!!! i dont know why wont they make electric motors like that for real?
mvlady 1 year ago
@FreedomlinkRadio Hi. Rotor is a 1 inch diam neodymium magnet N42 strength magnetized thru the diameter, from K&J magnetics, ( about $12 ) Schematic is available on other videos,and Google Rodin Coil group in files section.
Aloha
jackscholze 1 year ago
So proud of my brother Jack Scholze. Congratulations for being invited to share in the conference.
KSGUYNN 1 year ago
What a machine you have there? A very happy playground for electron I imagine, let's watch on.
cakegy 1 year ago
25.000 rpm is awesome, Bedini meets Rodin, I get that, but what I don't get is the triangle on top, could u explain? Most of my girlfriends where Tigers, Myself, I'm a Pig :P
SilverTissues 1 year ago
@SilverTissues The tetrahedral coil on top is a peripheral field checker sort of. to see where the best inductive effects are. I measure the a AC on the coil, also sometimes put it in series with the big coil to see what that does.
I hope a bunch of folks build these things and investigate. aloha
jackscholze 1 year ago
So what exactly can any of us do with the Rodin coil? Is the main use as a pulse motor driver? How much torque can we get from this thing does it react well under load? If I made a separate drive shaft with a bunch of magnets on it and engaged the coil would I get enough torque and if so is it more economical than a regular DC or AC motor? Is a DC brushless just as good?
dmgcat 1 year ago
@dmgcat I'm an expermenter, and find the Rodin Coil, Starship coil, Newman motor coils exhibit enhanced inductance effects over a regular solenoid type coil. The swirling B-fields in the center are impressive to play with. I do not know if they are any better than regular DC motors, or if anything useful will come of these investigations. Aloha
jackscholze 1 year ago
Also your gonna have to use Pulsed DC and a Sine Wave generation Program if you want any antigravitic results, that's how far Jamie got before he cut us all off. But if you look back on Bob Lazar's work he speaks of a certain frequency 7.23 or some odd used in the craft It is hard to recollect.Either way, excellent acheivement!
DexLabb 2 years ago
To answer one of your question, And please refer back to Marko's Vortex Math video, but the highest RPM comes when the coil centre is OFFSET from the center because that is where the VORTEX is located. If you look at the ennegram with the 1-9 on it, very simple, you will see the interesection point is NOT THE MIDDLE. So this is further evidence and backing to his discovery.
DexLabb 2 years ago
@DexLabb You are right, the highest RPMs are when the coil is shifted off to the side relative to the central rotor magnet. Strong mag fields all over stronger toward the center. This is a pulsed DC motor, but no sine wave added as yet.
How would I do that?
aloha
jackscholze 2 years ago
@jackscholze You can start with ToneGenerator but there are many freebie software out there that might get the job done just as well just route it from computer to your gear
DexLabb 2 years ago
so what does the tetrahedron coil do? Interesting. Those are some damn impressive RPMs. Congrats!.
morpher44 2 years ago
@morpher44 The tetrahedron coil is to measure magnetic fields around the main coil by picking up induced voltages. It is a downward spiral wind to be used later for the anti-gravity device :)
The tetrahedron is constructed of coffee stirrer sticks to give it an implied caffeine boost.
Aloha
jackscholze 2 years ago
Jack, that baby whines like a spoiled kid when someone stole their lollipop. :)
It's sure putting out some revs. Makes me wonder what it would do if the rotor was on some magnetic bearings.
The poem is great. Your a man of many talents.
Peace, and Happy New Year.
Mike.
mikepowers420 2 years ago
love the pyramidal type coil, loooooong over due.
brilliant peom.
thanks for showing.
harpbloke 2 years ago
@harpbloke Later yesterday, fooled around and got it up to 30,000 RPM ! Screamer. The highest speed is with the coil center offset an inch ore two from the center, which is curious.
aloha
jackscholze 2 years ago
Hi Jack, its Faisal... This is because the lines of force are going into the vortex which should be in the center of the coil. The rotation of the magnet should be towards the vortex so if you have another rotter at the top of the coil, it would try to spin into the vortex also.
faisalsaeed80 2 years ago
did you test the torque? perhaps you can do more with this results...! aditional coils and get more energy...!
skycollection 2 years ago
@skycollection I have one more neo-cylinder to maybe increase the torque. There is an energy recapture when using a charger diode off the collector of the power darlington, like in a Bedini charger. Just hanging an inductive load on it or a frictional load just increases the power draw as the RPMs go down under the load, as in a regulat motor.
aloha
jackscholze 2 years ago
well happy chinese day sir! and valentines day is like a box of chocolates love peace and blessings!
SCENARIOBABY 2 years ago