Exceed RC 2.4GHz R/C Radio System Setup Instruction Full

[gcr100]

this radio works for elevons?

[100randydmaster]

i just programmed my t-6a tx hausler on computer through digital radio & silabs coz my t6config doesnt wrk on my windows 7,& it works,..i changed my mode1 to mode2...bt i got a problem coz my vr(A) doesnt work anymore w/c is improtant for gyro settings, another thing is that everytime i turn on my tx & my 450 v2, i should switch to on my throttle cut, if turnd on, the motor will start automatically...HELP ME PLSSSSSS.......

[miangel719]

Are those setting apply to RC airplane? to be more specific F-117 Please let me know I'll appreciate .

[f1adore]

how do u bind the receiver for a gas plane?

[jerryluvjeslin]

where can i buy it ?

[xhelicopter]

@jerryluvjeslin Check out XHeli. com! :D

[onmyway21]

Ware are the Divice drivers????

[optimistONE]

I have had this package for a while now and this is very helpful especially the binding part. Nice job and thanks! :)

[olive350]

Mark,

You are so good in explaining setups. I droped my exceed transmiter and so I wnt and bought the Futaba TF8g Computer radio. However I don' know base setting to get me started for for hovering the blueray 450 Can you email me all base settings for the heli so I can fine tune as I get along. It would be great If you can help.

Best .

laundry222do@msn.com

[geekpeptalk]

Is this transmitter really worth it?

[88redsand]

Does is it have v-tail mixing on the exceed 2.4

[alishanmao]

I did not know Exceed RC was rebranding FlySky 6 channel radios. well this video clears it out. its a good radio for RTF planes or helis, but pain in the ass when it comes to change a tiny setting, even reversing a channel, you need to carry a laptop to the field if you wanna setup a heli right on field

[MrMorfen]

When subtrimming my servos move but instantly go back to the same position they origionaly were.

[djony007]

I just got this transmitter this morning and it didnt come whit a cd I went to exceeds website and didnt see anywhere I can download the software can anybody help thanks

[xhelicopter]

@djony007 Please visit our support forum RCDISCUSS . com we have live techs working there with the software you need

[MrMorfen]

Thanks man alot of help

[hagfelsh]

Helpful video, thanks!

[bcongero]

I'm having trouble with the transmitter and wild hawk plane. The channels activates motor and servos at the same time

[discoape]

Sounds like it's mixing for a helicopter. To change this:

Backup your settings ( GetUser then save ). Go to "type" and change it to "ACRO".

Make sure to save it as a new file name once you are done.

[dodoslovensko]

great video.

Q; does the sticks self center .

i would like to use it on my tamiya 1/16 tank.

now im using futaba 4wvd radio 4ch ,but i need more channels.

Q2:.i have vindows 7 is the software working on it?

[vanepico]

how many model memories does it have?

[kmoneyman33]

We bought this Exceed unit for our battle bot we are building for a class. We are having a problem with installation, our esc which is not BEC(Battery Elimiating Circuit) will not pick up the PWMT (The red,white, red cord) from the transmitter. Our bind plug is different than the videos it is just a loop of plastic wire. So do we need an actual battery source plugged into the "BAT" slot? As you can tell we are newbs at this and quick and efficent respones would be greatly appreciated THANKS!

[dertuman]

Thanks a lot, this will help when I get my new TX :)

[RcAndries]

I've been trying to get it working on my pc but it doesn't!

I've tried it on Vista and XP, and they both call the usb-cable a "CP2102"........ noticed how the driver is for a "PL2303"?

I also tried some random 210X drivers, but they cause the t6config to "hang" when I choose the right COM-port, and it will only continue to work when I shut down the connected transmitter.......

Can anyone please help me with this problem, I was really looking forward to flying my new Thunderbolt II...

Thanks!

[xhelicopter]

Please call tech support or ask Andy at rcdiscuss . com. Thanks. Sorry for the inconvenience.

[LTF85199]

I had the same problem, there is actually 2 options to fix for this issue, option 1) Plug in that usb cable using and un-powered 4 port usb hub. Option 2 is the find the updated t6config software that somebody made it is called ATEasy6-136a.exe, reply me if you want me to PM you the download link. But I use option 1 to solve this issue. works perfectly,

[geterdnboy]

does this work with flight sims?

[LTF85199]

Yes, i use FMS and Microsoft fligh sim x with this controller. you need to find and install and config 2 additional software: 1) ppjoy and 2) t6sim

[1660195]

Also the motor Size is: 480-size 960Kv brushless outrunner

[1660195]

Also I was wondering if you have any suggestions on a battery for a Park Zone F4U Corsair. Everything is stock, I just need a Transmitter and a battery. It has a 30-Amp Pro Switch-Mode BEC Brushless ESC from E-flite. If you can help with this it'd be much help. Thanks =)

[1660195]

Hey, Nuttcaze. Have you ever had any problems with this transmitter?

[KedmenecMartin]

Does this transmiter also work with RC Airplanes?????

[xstell132]

ya it does

[Nicolasr1]

what servos r those and r they on xheli?

[4mike1080]

Does this radio and reciver have a fail safe?

[LTF85199]

Thank you you saved me from continuing my frustrations, very non intuitive the programming interface but once get the hang of it, it is easily mastered. tons of options on this cheap little guy.

[MsRobmac]

where can i get the complete radio set up that it was when i first recived this radio

i changed some of the settings and i did not first save the origanal settings

[xhelicopter]

You can give our tech support a call (626)968-9860

[yammx12]

The default sttings for Swash AFR is

Ch1 50%

CH2 50%

CH6 -80%

You have all at 70%+ what is right now?

Is the default setting wrong?

[onmyway21]

@yammx12 .....thank you for the info....ill give it a try

[yammx12]

Thanks for this introduction, hope you get paid from Exceed for this :-))

[duchessiph]

Amazing teacher - well done!

[Sharod101]

so does that mean that you can't change the settings on the field?

even the most basic things like trim n subtrim?

i don't think i'm gonna buy this, this looks like a junky Tx.

it just doesn't look like a good quality product,, and the softwre looks complicated to use.

its either i buy this or the DX5e Radio by Spektrum.

can you help me choose?

[allgunzsblazen]

wow if you new anything the dx5 wont work without a 6th channel,and i have this txrx setup it works great with out all the fancy stuff

[wowpaladin10]

that is awesome