@stormossenFIN You CAN'T buy flash powder, you make it. And no, you can't use sparklers. Please do search some lecture about it and read enough info before you even try to make it. It is very sensitive and dangerous, almost anything can set it off, friction, impact, static and so on. I try to avoid it as much as possible and even than i make small quantity's.
@BrightLightPyro I thought that it can be ordered online in the American site. but can not do anything I'm not going to start to make flash powder, it is dangerous to the home environment and materials to be here in Finland really badly. I can take the flash powder from commercial fireworks, it is difficult for such small fireworks. but I do not need it than a couple of New Year's Ten grams of home made fireworks. You can subscribe to my channel on youtube and watch fireworks, what ive bought on
@stormossenFIN Flash powder cannot be bought, nowhere. Simply to dangerous, factory's make it themselves just as "we" hobbyist do. I would be VERY carefull salvaging flash from live devices!
@BrightLightPyro yes. its easiest way to broke commercial fireworks and get flash there! its my way. go to check my vids there is some "tests" little bombs not so good but u can watch them and comment
@BrightLightPyro hmm i got a question.. i was wondering.. what is a small quantity? just to be safe abouts 10-20 grams right?
hmm as FP can not be ballmild how do you mix it up? could i just sif 2 smaller quantity together lets say 15+15grams to get 30 grams siffed together? or just mix it by using paper?
@r2darky that amount is safer than mixing100+ grams which will definately remove limbs if it accidentally ignites near yo. Dont mix it ANY OTHER WAY other than using the diaper method, which just means that both the oxidizer and fuel are seperatly added to peice of newspaper and mixed by lifting the ends of the paper. I use coffee filters for small amounts of flash because the paper makes a cup shape. Remember that 3 grams of flash igniting can remove fingers or burn you severely. Good luck!
@MrBillLumberg hey, i've come a looong way sinc my last respond, thoo i have to ell you that 3 grams of flash powdr is really not much, (as you probably do know) ad well ive got myself stuff to be safe because safety abouve vrything, i mash up 10-40grams of flashpowder with the uther most precaustion, i do NOT tell other people to do the same as it is rather dangerous and not safe to work with this much grams unless you are going to use it straight away ALWAYS use ur FP ASAP.
@stormossenFIN You can use sparklers to make the rocket. But that is verry weak. For explosion you must use the flash powder. Just take few strong firecrackers and pack it into it. Sorry for my gramma.
Thnx mate, i also have sponge, but its to expensive for my liking to use in reports and such.This Flake has the same effect because it has a little ponge in it but is cheaper. I only use sponge in rocket tails and fountains and such, because sponge is so fine it wont glock up nozzles, other than that i use flake.
HOw do you made the Rocket ? Pls answer ;)
MrFeuerwerkstester 1 week ago
who do I can mADE THE titanium?
TheNathan023 1 week ago
Doesn't that metal container make shrapnel?
rocketpro22 2 months ago
for the salute do you put just titanium or do you have to mix something with it
anthony102010 4 months ago
that was AWSOME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Mrmasterofpwnage 6 months ago
This has been flagged as spam show
To see the MythBusters guys set off 1000 pounds of thermite in an effort to cut a car in half, see my video
Incendiary Experiments
punxsutawneybarney 7 months ago
damn this one explodes very fast!
TheCaramelflavour 11 months ago
wat did u use as proppelant? my bp/titanium mix burns too dam quick. Any tips?
gothbro111 1 year ago
hey. where i can get lot of flash powder in finland? can i use sparklers for flash ? plz answer
stormossenFIN 1 year ago
@stormossenFIN You CAN'T buy flash powder, you make it. And no, you can't use sparklers. Please do search some lecture about it and read enough info before you even try to make it. It is very sensitive and dangerous, almost anything can set it off, friction, impact, static and so on. I try to avoid it as much as possible and even than i make small quantity's.
Please be safe!
BrightLightPyro 1 year ago
@BrightLightPyro I thought that it can be ordered online in the American site. but can not do anything I'm not going to start to make flash powder, it is dangerous to the home environment and materials to be here in Finland really badly. I can take the flash powder from commercial fireworks, it is difficult for such small fireworks. but I do not need it than a couple of New Year's Ten grams of home made fireworks. You can subscribe to my channel on youtube and watch fireworks, what ive bought on
stormossenFIN 1 year ago
@stormossenFIN Flash powder cannot be bought, nowhere. Simply to dangerous, factory's make it themselves just as "we" hobbyist do. I would be VERY carefull salvaging flash from live devices!
BrightLightPyro 1 year ago
@BrightLightPyro yes. its easiest way to broke commercial fireworks and get flash there! its my way. go to check my vids there is some "tests" little bombs not so good but u can watch them and comment
stormossenFIN 1 year ago
@BrightLightPyro hmm i got a question.. i was wondering.. what is a small quantity? just to be safe abouts 10-20 grams right?
hmm as FP can not be ballmild how do you mix it up? could i just sif 2 smaller quantity together lets say 15+15grams to get 30 grams siffed together? or just mix it by using paper?
r2darky 1 year ago
@r2darky that amount is safer than mixing100+ grams which will definately remove limbs if it accidentally ignites near yo. Dont mix it ANY OTHER WAY other than using the diaper method, which just means that both the oxidizer and fuel are seperatly added to peice of newspaper and mixed by lifting the ends of the paper. I use coffee filters for small amounts of flash because the paper makes a cup shape. Remember that 3 grams of flash igniting can remove fingers or burn you severely. Good luck!
MrBillLumberg 7 months ago
@MrBillLumberg hey, i've come a looong way sinc my last respond, thoo i have to ell you that 3 grams of flash powdr is really not much, (as you probably do know) ad well ive got myself stuff to be safe because safety abouve vrything, i mash up 10-40grams of flashpowder with the uther most precaustion, i do NOT tell other people to do the same as it is rather dangerous and not safe to work with this much grams unless you are going to use it straight away ALWAYS use ur FP ASAP.
r2darky 7 months ago
@stormossenFIN You can use sparklers to make the rocket. But that is verry weak. For explosion you must use the flash powder. Just take few strong firecrackers and pack it into it. Sorry for my gramma.
Ubojica6661 1 year ago
@Ubojica6661 Really not the way i do it, but i guess it might work.Please be safe!!
BrightLightPyro 11 months ago
voll cool :D
noahniessen 1 year ago
@noahniessen Thank you!
BrightLightPyro 1 year ago
Very nice!!
NoNamerFireworks 1 year ago
@NoNamerFireworks Thank you!
BrightLightPyro 1 year ago
what was the motor R-candy or else??
druszan17 1 year ago
@druszan17 BP
BrightLightPyro 1 year ago
damn :D
MrM4rek 1 year ago
whats the ratio for the report?
saskwche 2 years ago
50:50+2%
BrightLightPyro 1 year ago
6gr flash? shit whats happend when you use 20gr :P
nickskuhmd 2 years ago
It's all a game of containg the powder long enough while it wants to burst.
BrightLightPyro 2 years ago
very nice mate
murdoch2486 2 years ago
Thnx dude!
BrightLightPyro 2 years ago
awesome!5*
starandshellman 2 years ago
Thnx!
BrightLightPyro 2 years ago
nice! 5/5!
Huttersvuur 2 years ago
Thnx!
BrightLightPyro 2 years ago
nice man homemade?
5.
VuurwerkOssOost 2 years ago
Thank you, yes.
BrightLightPyro 2 years ago
fuck mate.. that salute sure did scare u:P
Pyrotechnics88 2 years ago
Yeah it shook me quite a bit :D
BrightLightPyro 2 years ago
Realllly nice :D 5* Wich country?
Bastiiiaaan 2 years ago
Thank you. Yes the lower one ;o)
BrightLightPyro 2 years ago
O and btw, Is it wrapped in fiberglass tape?
Taydrum 2 years ago
Thnx mate :D
Yes it was, three layers.
BrightLightPyro 2 years ago
HOLY TITS! That was awesoome!
:D
Taydrum 2 years ago
Wow, that was loud :D
Nice one M, 5*+
O3Cl 2 years ago
Thnx S!!
BrightLightPyro 2 years ago
damn excellent job :D i prefer the ti sponge but it was awesome still! 5*
DownUnderPyro 2 years ago
Thnx mate, i also have sponge, but its to expensive for my liking to use in reports and such.This Flake has the same effect because it has a little ponge in it but is cheaper. I only use sponge in rocket tails and fountains and such, because sponge is so fine it wont glock up nozzles, other than that i use flake.
BrightLightPyro 2 years ago
subbed what did you use in side the rocket to get those brilliant white sparks?
flashsn1pe 2 years ago
Thnx mate! It was titanium flake.
BrightLightPyro 2 years ago
Nice work!
greatkid1 2 years ago
Thnx :D
BrightLightPyro 2 years ago
nice racket 5
parkourlja 2 years ago
Thnx mate!
BrightLightPyro 2 years ago
Very good:) 5*
KMnO4dalla 2 years ago
Thnx :)
BrightLightPyro 2 years ago
Hehe, those bangs are a treat, how much Ti did you add? 5*
skyisthelimitinc 2 years ago
Oh they are :)
It was about 0.5gr flake.
BrightLightPyro 2 years ago
pretty nice!
AirrowRocket 2 years ago
Thank you.
BrightLightPyro 2 years ago