Hi, Im putting a 1988 AOD in my 68 mustang...Does the electric plug have to be connected to anything? or is that just for overdrive? If yes, is it just 12v and a ground? Please let me know. thanks
Hey, I've got an aod out of a 1988 mustang gt that has received a total rebuild but my out put shaft doesn't spin and when the gear selector is moved into the park position I don't hear the parking paw engage. Could the parking paw be stuck, and what type of end play should the input shaft and out put shaft have? Also when you put the needle bearing in the bottom before the out put shaft was dropped in is there a correct side that goes face down or is it universal?
should your output shaft move up and down and side to side?and what would be wrong your bearing and bushing or one or the other and how would you change them?
@dupont4sure The output shaft itself might have some play in it if you take the yoke out but with the yoke in it should not have much wiggle to it. If it moves alot and is destroying your rear seal then it could be your extension housing bushing is worn.
@dupont4sure The output shaft itself might have some play in it if you take the yoke out but with the yoke in it should not have much wiggle to it. If it moves alot and is destroying your rear seal then it could be your extension housing bushing is worn.
@bah53 You need to replace the output shaft. Replacing the output shaft requires removing all the guts from the trans as its the first thing to go in.
Hi im bearly learning auto Trans on my own and I took a ford crown vic trans out to rebuild it but I have a problem when I was taking the oil pump out a little clip came off and I dont know where it goes im thinking its the anti clunk spring but it doesnt look like the one on ur vid its more of a triangular shape ive looked at diagrams and I cant find it I would really appreciate it thanks transmission auto Pke-dvo
Hi, Im putting a 1988 AOD in my 68 mustang...Does the electric plug have to be connected to anything? or is that just for overdrive? If yes, is it just 12v and a ground? Please let me know. thanks
extreme383 3 months ago
"Bah" Has Kicked "Doug" from Expervillage in the bawwlz
chamblizi 6 months ago
What is spec for the depth?
BIgBlocksnHardRock 11 months ago
@BIgBlocksnHardRock 5.0L & 5.8L- (1.634-1.636 inch) 3.8L - (1.629-1.640 inches) These specs include the hieght of the tool which is .700 inches
bah53 11 months ago
@bah53 hey man, thanks alot! Might be having some more ?'s on some other clearances.
BIgBlocksnHardRock 11 months ago
how long do u think it would take for an experienced mechanic to swap out a bad AOD and put a rebuilt in?
tippman2k01 1 year ago
Hey, I've got an aod out of a 1988 mustang gt that has received a total rebuild but my out put shaft doesn't spin and when the gear selector is moved into the park position I don't hear the parking paw engage. Could the parking paw be stuck, and what type of end play should the input shaft and out put shaft have? Also when you put the needle bearing in the bottom before the out put shaft was dropped in is there a correct side that goes face down or is it universal?
chadl100 1 year ago
should your output shaft move up and down and side to side?and what would be wrong your bearing and bushing or one or the other and how would you change them?
dupont4sure 1 year ago
@dupont4sure The output shaft itself might have some play in it if you take the yoke out but with the yoke in it should not have much wiggle to it. If it moves alot and is destroying your rear seal then it could be your extension housing bushing is worn.
bah53 1 year ago
@dupont4sure The output shaft itself might have some play in it if you take the yoke out but with the yoke in it should not have much wiggle to it. If it moves alot and is destroying your rear seal then it could be your extension housing bushing is worn.
bah53 1 year ago
Question....can you use the 2wd transmission and remove the extension housing and mate it to a transfer case?
thick2licknstick 1 year ago
@thick2licknstick I'm not sure, ive never had a 4X4 one to look at, but I bet it could probably be done.
bah53 1 year ago
@bah53 You need to replace the output shaft. Replacing the output shaft requires removing all the guts from the trans as its the first thing to go in.
lemonlime07mi 1 year ago
Hi im bearly learning auto Trans on my own and I took a ford crown vic trans out to rebuild it but I have a problem when I was taking the oil pump out a little clip came off and I dont know where it goes im thinking its the anti clunk spring but it doesnt look like the one on ur vid its more of a triangular shape ive looked at diagrams and I cant find it I would really appreciate it thanks transmission auto Pke-dvo
A4321040406
lx11alex 1 year ago
@lx11alex I can't think of anything triangluar that should have come out with the pump
bah53 1 year ago
This is some good stuff, learning a hell of a lot!
More350Power 2 years ago
Comment removed
onyxreddragon 2 years ago
good tip never loose your balls lmao oh that didnt sound right lol
blazerlover25 2 years ago
This is ever becoming a facinating series man!!! Can't wait to see the finished product!!
mbyr31 2 years ago 2