440 rev homemade can

[crosbyn187]

nice ski-doo :p

[400ski]

do u have any for a ski-doo formula s 380 or a 2005 artic cat z 370?

[skidooredneck]

my clutch engages at 4100 rpms i don't know about the 440s but i thought they engaged at lower rpms

[epiccrazyman31]

wait this guy isn t a retard that is pretty awesome.!!!!!!!!!!!!!!!

[4x4chevyhd]

my 98 zr 600 takes off at 6,500 rpm and idles at 1,700

[emeraldflame59L]

my sled kicks in at 4k rpm stock revs to almost 10 grand no problem :p a little bit fast

[ya333333333333]

sweet homemade can,but you have an exhaust leak were your can meets the pipe

[MrHondaracing52]

Can you make one for a polaris XCR 440??

[moaksen]

That can is shit, its leaking exhaust between the pipe and the silencer...

[moto85x]

sounds good ;p

[arcticcatguy77]

that thing sounds awsome i have never heard a home made can sound like that

[dontbsadberad]

18jivan that's funny cause mine engages around 5300rpms strait from the factory and it's a 2 stroke

[18jivan]

@dontbsadberad whats sled do you have?

[RYMERHENYU12345]

how did u make that?



[polaris550shift]

how much did it coats you to make that

[Silentwoody]

You should put a monster sticker on it too! it adds 25 hp

[18jivan]

Sounds good but a 2 stroke should run at like 1400- 1600 rpms and engage at about 3500 rpms.

[wonsdeeni]

@18jivan

no.. its a race motor set up for snow-x.

[18jivan]

@wonsdeeni stop the video at 0:17, its idling at like 1600 RPMs.

[sleadhead1g]

@18jivan and its also off the ground so the clutch is just catching a little....if you get a sled stuck and lift the back end up while getting it out the track will spin

[18jivan]

@sleadhead1g ahhh gotcha

[cody7861]

@18jivan my sled kicks in at 5500 it all depends on what you have done to it

[ihartthecandy]

@18jivan my clutch engages at 5100

[m4master100]

@18jivan These skidoos have like a 5k engagement. Good launch

[2six2og]

lol retard

[alaskanboy99661]

damn that sounds good!

[NZXTInerTia]

Sounds great!

[byPetra]

@brandy151 What kind of sled do you have that the clutch engages @ 2k rpm????

[byPetra]

@brandy151 Yeah. Kinda. It'll slowly idle up then the clutch will engage and it will idle down a little and then just stay at 3k. Once in a while I'll notice my sled is rolling away. XD

[byPetra]

@brandy151 Dude, I have a sled that Idles at 3k rpm. Although it does have 20k miles on it...

[minid0nuts]

MY MBRP RACE CAN SOUNDS BETTER THAN THAT!

[cookiedr]

Sounds Sweet!!! Did you jet it?

[anonymzs]

what did you use to make it?

[speedfreak460]

When they idol at 2k its prolly still in warm up stage burp her onec you'll see you'll all see lol. My 07 would hang idle and it turned out to be Y-pipe bolts going MIA

[rivetteracer11]

where did u get that graphics kit at ?

[KHSBikesCo]

how big are the paddles on your track?

[ryry15p]

i usually idol at 1500, 2k is fine.

[600etecXRS]

sounds sick

[drewbug8]

where can you get that windshield?

[range9414]

@brandy151 Wow stop replying...anyway i said that cause the track is spinning...

[Raptor250racer]

love the duck tape on the hood

[MRSYCOSQUIRREL69]

@Raptor250racer its a race sled bro shit happens lol

[johnnyskidoo600]

Can you make a silencer for a 2001 Ski-doo MX-Z 600? I want one badly but they are all too expensive.

[super87cole]

ohhhhhhhh myy gooddd i would kill 4 that sled. ohhhhh right i have a 1996 shitykitty 340 :/....fmll

[EcliipseProductionz]

are 440s good for ditch banging and shit?

[FabesFarmer]

major exhaust leak

[LilSuce]

to the slednecks out there i will say burrrruup burrrruup

[cdtank1]

wish you guys could make oen for my 2000 zl 700

[XeXbanqz]

dude i need help i need to make a can for a 91 ski doo 462 but nobody will touch it. it doesnt need to be fancy just needs to make it LOUD.

[J1I9M7M4Y]

@XeXbanqz Cut off the silencer. Done!

[hondaryder042]

Sounds veryyyyy nice and it looks good to.

[GIJOE131313]

enziet - heaven shall burn is the song in the intro. sick sled!

[liveitrough29]

SONG!!!!!!!!!!???????

[12Kyle1]

what was that song

[hampus136]

Holy crap, That sound is totally amazing!!! :o

[Stuntmaner1]

Nice way to hold your hamdle bar cover on if you were ridin without a helmet and smashed your head aginst that it wouldhurt really bad

[deprivedfromkindness]

SOMEBODY! What is the song at the beginning of the video?

[yakeley]

look where the pipe joins it leaking smoke out thats not good

[TheHondaAbuser]

sweet

[MrKawasakibooi1337]

what a mad sound _;D

[madsleder1]

is the sled for sale pay top dollar where abouts are you

[sexybrock]

does anyone know of anyone making a can for a tundra 250 atal?

[MrKayfed]

that sounds so sick.

[PerformanceCans]

i will buy 4 from you

[10renegadex]

Belt*

[10renegadex]

It's because the track is too tight, or he has his elf deflection set too tight. Can sounds sick man

[SkiDooFan9]

any problems with police? and how could I get one?

[sledhead1011]

so u know how the track spines when it ideals is that cause the track is so tight or wat ? nice can by the way

[Kinkryder8]

sounds amazing bro! i wanna get a can for my sno pro.

[23sneakers]

2000 idle is fine but 5700 engagement is kinda high you have alot more peformance in thins thing you might not be getting a ful shift out of it a looser spring in the primary would take care of the problem i think im no expert but....

[IamQuiteTheGuy]

what do yoiu get for gas mileage on these things?

[sodey78]

ur retarted



[MoortenJ]

hey, what's the top speed of a 440?

[justintcurran]

@MoortenJ , it depends if its fan cooled or if its liquid cooled, my yamaha 340 fan cooled goes 110-120klph(max) on hard pack snow

[fatso1223]

do u have one for an arctic cat f7 2006 i made one but im not sure if ill lose power from it i kno someone who made one and lost alot of power on his sled

[range9414]

wtf adjust ur carburators ur sled runniing at like 2000rpm

[wonsdeeni]

the belt engages at 5700rpm, 2000rpm is fine with me

[range9414]

oh kk didnt know that...can u do catwalks easy with that sled?

[billylikesford]

is it your sled? no, then shut the fuck up and move on

[range9414]

@billylikesford did i ask u something? no Stfu

[drewbug8]

@range9414 Whats it supposed to run at?

[jimbo66137]

@range9414 Your gonna over heat your engine i hope you have an aftermaarket radiator

[SummitXCR600]

@range9414 thats normal dumb ass

[crazyboondocker]

@range9414 my Viper MTN runs at 1800rpm and track engages at 4000

[alexxo92]

@range9414 it's a 440.... is's supposed to have a higher idle for faster clutch engagement

[Quincho442]

@range9414 my sled idles at like 1100-1200rpm..

[proskater56]

very nice esled

[jpolly83]

well guys, not all of us ride trails, i made a custom can for my summit x 740, it sounds real nice, but people would get pissed off if i trail rode it, so therefore, i ride the ditches, or the mountains! Problem Solved!

[volcom452]

would you make my body one of those?

[FreeLineProductions]

wtf @ your track lol

[WeenishProductions]

@FreeLineProductions its called clutching, and you make the belt ride like maybe an 8 th inch max above your seconday

[69chevy350hp]

did u add any packing material to it cause it looked like it was just a staight pipe?

[rdawg0000]

THat is a great sound!

[mxz440skidoo]

sounds sick but thats what is makin people protest against snowmobiles.

[xcrr440]

not trieing to be a dick er anything but cans are a waste of time, and often loose HP and can get trails closed but thats just my 2 cents

[891ismith]

@xcrr440 some people around my area have cans so they might close down the trails and if the do im going to be fucking pissed because i love riding my tnt

[Beastly05cr85rbkid]

@1995racer i think that jaws make em for 550s

[ebbers96]

that sounds sick

[snopromaniac99]

wats the song in the beginning and that can sounds bad ass could u make one for a 97 zr440 snopro cuz i cant find any for it

[1higs]

what brand of jetting did you get, and have you put anything else into your sled? and how fast have you got it going?

[SonsOfSaints369]

did this blow up ur sled? enough back pressure?? u sell them?

[111BbradD111]

how man mpg do you get on this sled?

[rex669]

When you install a "Can" do you lose any HP from lack of back Pressure?

[ridesoul69]

@rex669 naw, if anything you'll improve air flow...you should re-jet tho

[1995racer]

You should make one for a 550 supersport 2005 they don't really make any cans for this sled

[1higs]

how fast have you got your sled going?

[uglytiger23]

do you have to re jet

[davison1021]

@mrjoeypahl lol i just read your question on google dude says 75 bucks and gives you a link

[sledinforlife]

@mrjoeypahl only if you have a silencer

[superkrotz12345]

wow that sounds good

[mccarty1243]

how do u make a can???? want to know how for my ski doo mxzx 440

[911hockeyguy]

man it sounds like fucking shit its retarted

[454sskilla]

hey i had some modified suspension would one of these 440 race sleds be enough power and just good enough for me i wiegh 285lbs and have a xc800 but thinking to switching over to a 440 race sled

[UncleBubbles94]

440 race sled - 100 hp, premix, jetting. your choice

[kniselyman12]

can you make one for a polaris 340 indy 2001

[kniselyman12]

can you make one for a polaris indy 340 2001

[JoeythePope]

Very nice sound. Its very deep and throaty, but has a great crackle at higher RPMs.

[chevelleSS396lover]

very niice man:D

[scottredmun5]

do they make them for a 800? or just the 440s

[superonion100]

nice can dude the craftmans ship is great sounds good

[sandrin686]

those cheap cans blow em up

[jsr116]

how much for this can? for an 04-06 mxzx 440?

[wonsdeeni]

$225 i think

[jsr116]

Okay and do you guys ship? im located in Saskatchewan, Canada.

[wonsdeeni]

yeah they can be shiped

[baallzdeep]

@jsr116 Hey im from ontario and it costs me like 250 total max..worth it I have a 600HO and it is LOUD!

[fatso1223]

@jsr116 ill sell u mine for $20 its a 2005 600rev

[fatso1223]

@jsr116 nd im in saskatchewan

[mariokidz]

@jsr116 Just Build one man, There pretty easy to do! and IM FROM THERE TOOOOO!!! :D

[bkermie16]

Sounds sick man nice job and sled

[ryan07777]

on my xc 700 couldnt i just take out the packing to make it louder

[CON141]

no need, jsut go to your local canadian tire or auto store and buy a 30$ cherry bomb and cutt it in half, and that there can be made int to a can by really any one who can turn a wrench

[wonsdeeni]

how many people have a welder, and be able to do a good enough job without having leaks.. and fit up to the pipe.. theres a little more skilled work involed..

the guy who makes them is a journmany welder.. and the can and welds are garrentied for life..

[wonsdeeni]

you guys can buy them here.. lots of happy customers..

J Star

High performance exhaust

& Fabrication

518 528 6448

[arcticboy27]

is there any packing in that can?

[powerstrk250sd]

where do you buy these and do you lose power with it?

[joeltallica]

my sled sounds like that. exactly, haha its stock too.

[stauff09]

Sorry, a lot of dumb people on youtube. When i say drive belt, i don't mean the track. Just to clear that up.

[CjGaughan]

when the track is in the air like that, it tends to free spin. There is the slightest bit of friction and as soon as the drive belt catches it continues to go.

I'd say this is normal.

[stauff09]

I dont know a whole lot about the 440's, but it looks like the drive belts a little tight. They suppose to be like that? I also just made a home made can. I'll have a video of it soon.

[revripper440]

thats sick dude...

[dirtbiker0h9]

no kind of rattle

[waterboiy87]

rofl that sound is orgasmic

[snowfarry]

Just put this same can on my sled dang are they crazy loud, but it sounds great cant wait to ride

[SKIDOOriderSLEDNX800]

what is the song at the beginning?

[trxexrider13]

endzeit by heaven shall burn

[snowfarry]

I just bought this and have it on, any tips to go with it? did you have to change the jetting different because of the can just let me know

[SRT10TJ]

you shouldn't have to change jets just for a can... if you decide to add a mod pipe then you should also upgrade your intake as well as jets... prob 500's

[stevieweller]

sweet dude thats a pretty badass homemade can

[abbott911]

homade cans are a good way to blow your sled up. 2 stroke pipes have to be tuned to get the right backpressure. if its off you will blow your sled up.

[wonsdeeni]

tuned to the pipe, not the can.. with the 440 engine you have to constantly tune it for tempurate variations through out the day..

[pureadrenaline]

Another season down, how did it work?

Pureadrenaline from Dootalk

[limenine9]

ya thast a good way to blow it up haah wat ever not my sled what do i care ha!

[SKIDOOriderSLEDNX]

That homemade can sound real nice, i would like to hear that thing screaming up a hill!

[yamaharules163]

@SKIDOOriderSLEDNX lots of vids of this guy rippin with this can!

[xXBRAAAAAAAAPXx]

@SKIDOOriderSLEDNX its a short track................ wouldnt make it up a real hill

[chris96315]

if you had a good rider it could

[DevsonPaavola101]

sorta sounds like a jaws :P

[detroitPOWER]

Hey Im making a mod this summer But I was wondering does ur can makes more noise then ur buddys twin DMAX??

[TheRealEtron]

you dont want that exaust on there it doesnt give it enough back compression

[snoprokid2012]

what did you make that out of

[lilskidooman]

How big r those risers

[summit799]

is your clutch tight enough?

[CONVOY05]

dont you mean belt??

[wonsdeeni]

there are bolts that hold the primary spring in, i dont remember exactly, but some how they came loose and the spring wouldnt push out the clutch all the way to let go of the belt

[yanstl1]

wow wow wow, fucking nice dude

[devonlethbridge]

why do people have there track moving at idle. wont the sled go on you when it is not on the stand??

[wonsdeeni]

there was something rong with my clutch at the time, i hade to take it in cause it wouldnt let go of the belt...

[1999formula500]

so there could be somthing wrong with my clutch on the stand the track gings around at idel

[snowfarry]

with the 440's thats how there supposed to be set up for the clutching, but you dont want the track moving that fast, it should barely be creeping along

[ballm0use]

my sled's belt would creep along when I lifted it... Never was a prob, except if i fell off on a downhill it would tend to keep going longer than other sleds. One would think it would wear the variator belt, but no. But this is too much I think.

[tomrune92]

Nice :)

[philly1421]

its endzeit by heaven shall burn. The intro on the cd is called awoken, but is included in the video

[allRCman]

hey what did you make that out of

[dawsonhunt18]

nice sled man