NASA Video Part 1 - Regenerative Acceleration Explanation

[kdkinen]

You truly have answered everything we are wondering....

....like YEARS ago :)

[MrSAIKRON2]

Hi thanes, may i know how many turns for high voltage coil to make the rotor repel when the system is load?

[kdkinen]

"HV coil DOES produce a repelling field it is just delayed until the magnet is TDC to the coil's core - neither approaching nor receeding

The HV coil discharges its delayed field just prior to the magnet moving away from the coil and the HV coils delayed field helps to PUSH the magnet away in the SAME direction it is already goin anyway with ADDED torque

We also collect this delayed flux into the HC coils core and boost the HC power by 900% instantly with rotor acceleration"

T. Heinz 2009 :)

[heartlessvietboy]

Regenerative Acceleration is Fake. It's called Over Electricity Generator. Over Electricity Generator is a Generator Creating Extra Electricity to run the Generator itself and something else (Automobile).

[instantproducts]

NASA = Never A Straight Answer

[Superbustr]

Sorry I am 12 explain every thing really simply. I wanna know how works?

[instantproducts]

@Superbustr If a motor can be used as a generator and a generator can be used as a motor, there is the problem. That is because the function of one is inherent in the function of the other. It is when a motor can NOT be used as a generator that you can get away from the problem of back EMF. However, if you look at Bob Teal's Motor Patent or Dr Peter Lindemann's Rotary Attraction Motor, neither of those motors use magnets. They both can extract the Back EMF which can be stored or used elsewhere.

[pha3zme]

Thane's work shares the limelight with Robert Adams' motor. What Thane does not explain is that the rate of field collapse is the key factor here. By using a high impedance coil, the stored field takes LONGER to collapse. This allows a magnetic field to form which pushes the magnet away (if it collapses too fast, there is no magnetic effect). Robert Adams took advantage of this in his pulsed driving coils where both the DC pulse and the following field collapse pushed the magnet away.

[gmeatdaddy]

Hi Thane, It seems to me that you may have created a sorta sling shot effect by the geometry of your coils (does that jive with you?).Do you have both of your wires wrapped in the same orientation ie.clockwise or counterclockwise? Thx for your commitment and sharing.

-Gary

[uncleshorty]

It seems to me that once it is started. You energise the concentric bicoil and cut the power to the motor the rotor will spin on its own?

[MrJetjoe]

I understand now, simply said, a mag moter used as a genrator makeing no drag and extra power so reg.exl. thane you are incredable. cheers to you. and corect me if I don't get it.

[johnb003]

In your bi-coil setup, the high current windings go around all 3 cores, so even if you're right about the high voltage windings not having much effect on the approaching magnet, wouldn't the high current windings still induce the same magnetic field in the center core?

What's the significance of combining the high current coil around the high voltage coil in this manner?

[johnb003]

Wouldn't it be much easier to show this by showing the motor running on it's own power at a max speed and then introduce the high voltage coil and show how it then accelerates from there? Then at another location on the wheel you can introduce your conventional coils to perform work and show the deceleration. I don't just mean flipping switches, it's hard to tell if the coils are having any action even with open circuits.

[johnb003]

You could combine everything with a series of experiments, where you let the motor reach it's final speed:

"Here's the motor running at full speed."

"Here's the motor running faster by introducing the HV coil."

"Here's the motor runnning slower as I draw a load with a high current coil"

"And finally with the load still being drawn with the high current coil, I'll re-introduce the high voltage coil and now see how the speed reaches X, this relates to the original no-load speed like So..."

[johnb003]

And to be more conclusive you could show how much power is consumed to run the original motor over the whole experiment, (speed is not everything).

Also perhaps you can even further enhance this effect by using a capacitor that improves the stored electrostatic energy, and have it resonate with the inductor at the frequency your magnets are passing by.

[utubealabama]

Is your board presentation available in PowerPoint, PDF, etc.?

[RLore18]

If I understand this correctly... the magnets approach the coils, the kinetic energy of the magnets is transformed into a high voltage, and when the magnet finally comes to a perfectly centered rest, the high voltage is released and that forms a current in the coil which magnetizes the solenoid and pushes the magnet out the other end while attracting the second magnet behind it.

So it absorbs kinetic energy and when done immediately redistributes it. Am I getting it? XD

[ThaneCHeins]

Yes - But I would express as; a magnet approaches the coil and a high VOLTAGE is induced in the coil. At TDC top dead centre the magnet is neither approaching nor receeding the coil, the high impedace of the coil drops to the low DC resistance and the voltage is now able to be dissipated through the coil allowing current to flow and producing a delayed magnetic field which pushes away on the already receding magnet while attracting the approaching opposite pole.

Best regards

Thane

[dwinslow1245]

Excellent work, this will mean a dramatic increase in efficiency by negating Lentz's law, we should see 5kw generators run on a 3.5 (or less) hp motor instead of a normal 10+ hp motor again excellent work. One question, does the resistance on the prime mover decrease as load increases on the High voltage and high current coils? ultimately to zero resistance on the prime mover? If it does you are on to something, and this could revolutionize power generation

[panoarturo1]

New law of energy = ? The energy can be created, transform and destroyed.

[BlakeMason2]

I guess I have to ask the obvious--is this simply an efficiency improver? I see no claims of over unity efficiencies. As an efficiency improver, how significant is it?  Conventional conversions from mech to elec can now be above 80% (with enough expense on the generator).

[remenozes]

This is Thane Heins? I'm an admirer of him, because of his perseverance in the consecution of a dream... It will be wonderful to work in this...

Have had in consideration the simmilarity with the Marinov Motor? It works... maybe the same principle is working... there's no violation of physic laws... there's a misunderstanding of the Lorentz Force.

Success and Peace.

Aparicio.

[kingofkeys79]

What about the magnets? They can loose their magnetism over time can't they?

[ThaneCHeins]

The HV coil DOES produce a repelling field it is just delayed until the magnet is TDC to the coil's core - neither approaching nor receeding.

The HV coil discharges its delayed field just prior to the magnet moving away from the coil and the HV coil's delayed field helps to PUSH the magnet away in the SAME direction it is already going anyway with ADDITIONAL torque.

We also collect this delayed flux into the HC coil's core and boost the HC power by 900% instantly with rotor acceleration.

[edsonfgs]

If the HV coils and HC coils was placed in different sites separately at front to rotor magnets they can make its acceleration. Sorry my bad english, i speack portuguese only,,,

[kdkinen]

@ThaneCHeins

Man :) What a good answer,

your design is sweeter than if you even tried to make it up.

Cant get enough of this :)

Nobel Service To Humanity Prize!!

[edsonfgs]

Very god explanation. This HV bi-coil is very interessant. I rave a question: If de Hv coil dont produce a repeling field we can extract more more energy of the rotor using seven or eight coils until make energy infinitely dont making back to the rotor.

[itamarmj]

Fantastic Thane... I believe in your projects, keep walking. :D