hi , I got a question , @ 2:56 the cable you've unplugged , what's that cable for ? after the GTA car kit plugged in , I can just leave that ? Please advice , thank you !
@HANA503 Hi, That plug is for the stock AUX in the armrest, by disconnecting that, you will loose that function, but our module has its our AUX :). thank you
The best way to remove the cupholder and shifter trim is NOT TO USE A HOOK!! Open the center armrest and pull the trim upwards where the latch closes. Work your way to the front of the trims. It's best to have the parking brake up. For manual transmission vehicles, twist the knob counter clockwise to remove it. Thumbs up to not gouge your trim!!!
The video wasn't 100% clear on a certain point... in "Ex 1" or "Hybrid Mode", can you use the iPhone to make song selections and the steering wheel and dash controls simultaneously?
I just install one and i did just like the guy in the video says, it work just fine. Some dude ask about amps and subs yes you can do it because the amps and subs are in a diferent conection, I have a mazda 3 2006 hatch and my stock radio has nothing on that port, so I just plug it and everything else keep working just like it was, so I have the subs, amps, cds and the gta car kit working without a problem ohh i forgot and my ipod. Do it!!!
this a great video.. although i only have one comment.. . I don't not recommend setting the box in the back behind the radio like the video suggested @8:54. I recommend instead hiding the box behind the cover capartment ("pocket" @ 7:40) and then run the wire the up the center to the radio connection. This gives you more slack on the cable so that you be able to talk on the phone while drving. Otherwise you be leaning way to forward. (trust me i just installed this last night on my Mazda 3).
For all of you installning, you don't have to ruin the original interior with drilling a hole for the cable. In the ash tray there is a small hole in the top that the cable can be drawn through (mps -07)
I already have satellite radio installed, would it be plugged into the aux that you plugged the GTA car kit into? if possible, i would like to have both satellite radio and my iphone 4 to work in my car, thanks!
i need it for aux in..will aux in be activated by media button on head unit??...also i have a ford in india with factory fitted 6 cd changer with similar 16 pin aux connector at back AND media button in front, will it work for that?kindly clarify as i really need this.
@gtacarkits an australian company is selling the same aux in adapter unit for both the 2007 mazda and the head unit in my car.So i guess what works for mazda should work for my system as well since they both have similar port and media button(mine has inbuilt 6 cd changer, dont know about mazda).I have attached the pics and the link is below.
@LazerBeem85 This particular car had factory AUX (that comes out under the arm rest). Therefore we had to replace it with our kit that has both AUX and iPod compatibility. If you car does not have factory AUX, this port should be empty.
@LazerBeem85 the arm rest is the middle console between the seats. If your car(like mine) didn't come with an auxiliary input standard you will have nothing to worry about.
This kit worked like a charm! I do like to take things apart but not in cars and this only took me an hour to do. Super easy install. The only issue I had was trying to figure out how to get the cd player back in with the wires and box out of the way and I used a little bit of Velcro then tucked them in the back to the left. I also put the wire thru the ash tray and didn't have to drill anything just pulled out the red plastic piece and fed the wire thru that. I have a 2005 mazda3 sp23 w/o aux.
@LazerBeem85 If you take a look at the video at the 7:47 mark when he takes the ash tray out or change tray as I use it for you can see that it has a red window on the top which where the light comes into the ash tray. That red plastic piece will slide off leaving an opening to feed the wire thru. Any other question feel free to ask as I was new to this process too.
Awesome vid, thanks guys.
garyw9243 4 days ago
noticed you guys are based from vaughn, why is there a shipping rate for canada and not the states?
MK519 1 week ago
@MK519 shipping in Canada is 3 times more expensive than US, that is why. thank you.
gtacarkits 1 week ago
@gtacarkits available for pickup?
MK519 2 days ago
@MK519 yes it is. thank you.
gtacarkits 2 days ago
is there one that will work on 2005 mazda6s?
KND362 2 weeks ago
is there one that will work on 2005 mazda6s?
KND362 2 weeks ago
hi , I got a question , @ 2:56 the cable you've unplugged , what's that cable for ? after the GTA car kit plugged in , I can just leave that ? Please advice , thank you !
HANA503 3 weeks ago
@HANA503 Hi, That plug is for the stock AUX in the armrest, by disconnecting that, you will loose that function, but our module has its our AUX :). thank you
gtacarkits 3 weeks ago
@gtacarkits Thanx a lot , I've just purchased yesterday online , can't wait to install it !!
HANA503 3 weeks ago
only 2 of my speakers is working the 2 on the left
choco3311 3 weeks ago
@choco3311 the music has to play on both side, email us, and we can figure the issue out :) thank you
gtacarkits 3 weeks ago
silly question. but this method works for both the hatchback and sedan correct? 2006 mazda3 hatchback 2.3 to be precise
MellowMadnessRMX 1 month ago
@MellowMadnessRMX Yes the kit will work the same on both :)
gtacarkits 1 month ago
@gtacarkits thank you :D
MellowMadnessRMX 1 month ago
The best way to remove the cupholder and shifter trim is NOT TO USE A HOOK!! Open the center armrest and pull the trim upwards where the latch closes. Work your way to the front of the trims. It's best to have the parking brake up. For manual transmission vehicles, twist the knob counter clockwise to remove it. Thumbs up to not gouge your trim!!!
paulkingiraq 2 months ago 3
on your website it doesn't say it anywhere that it will work with mazdaspeed3 GT with bose system
boar772007 3 months ago
I've got a Mazda 3 TS saloon 2005 and was wondering if it works in the uk? mine has clock/fm/am/cd/tape MD
richblaiklock 3 months ago
@richblaiklock yes the kit will work, please check out our website :)
gtacarkits 3 months ago
This has been flagged as spam show
will it work with Mazdaspeed3 GT which has BOSE system?
boar772007 3 months ago
The video wasn't 100% clear on a certain point... in "Ex 1" or "Hybrid Mode", can you use the iPhone to make song selections and the steering wheel and dash controls simultaneously?
withallofmymight 3 months ago
@withallofmymight you can use both, the iphone will be unlocked, so you can change from there, and also using your steering wheel and radio controls.
gtacarkits 3 months ago
will it work with Mazdaspeed3 GT which has BOSE system?
boar772007 3 months ago
HELLOOOOOO GTACARKITS?????????
boar772007 3 months ago
hey i was wondering if all the mazdas models from 04-08 have the aux input in the back of the radio? i have the 2006 mazda sport hatchback
TheCyol 3 months ago
@TheCyol Even if you dont have a stock AUX, this kit will still fit and work.
gtacarkits 3 months ago
I just install one and i did just like the guy in the video says, it work just fine. Some dude ask about amps and subs yes you can do it because the amps and subs are in a diferent conection, I have a mazda 3 2006 hatch and my stock radio has nothing on that port, so I just plug it and everything else keep working just like it was, so I have the subs, amps, cds and the gta car kit working without a problem ohh i forgot and my ipod. Do it!!!
juansinmiedo2007 3 months ago
can you still listen cd-s with this device ?
Sibens1 4 months ago
@Sibens1 yes, everything will work the same way after you install the kit
gtacarkits 4 months ago
Now, will you be able to hook up subwoofers and an amplifier, etc. to this kit?
iTzDifficult 4 months ago
@iTzDifficult No, unfortunately not.
gtacarkits 4 months ago
this a great video.. although i only have one comment.. . I don't not recommend setting the box in the back behind the radio like the video suggested @8:54. I recommend instead hiding the box behind the cover capartment ("pocket" @ 7:40) and then run the wire the up the center to the radio connection. This gives you more slack on the cable so that you be able to talk on the phone while drving. Otherwise you be leaning way to forward. (trust me i just installed this last night on my Mazda 3).
BALLIN02130 4 months ago 3
Man, excellent tutorial, I´m from Mexico, how can I contact you for buy a car kit, do you have that distribution??
JohanKarel 5 months ago
@JohanKarel please contact us by email. thank you
gtacarkits 5 months ago
Not trying to spam but, I want to know if I could put in a different radio deck(i.e. any Sony X-Plod series),period?
steeltownbrown52 6 months ago
Hi, do you have a kit wich includes a USB port?
thanks
arturok64 6 months ago
@arturok64 our kits do not come with USB
gtacarkits 6 months ago
Hi, do you have a kit wich includes a USB port?
thanks
arturok64 6 months ago
hi where can i buy this media kit?
mudasarhassan 7 months ago
@mudasarhassan hi, please check out our website.
gtacarkits 7 months ago
Comment removed
vancouverrob 7 months ago
Really helpfun man! Thanx! :)
tashows 7 months ago
For all of you installning, you don't have to ruin the original interior with drilling a hole for the cable. In the ash tray there is a small hole in the top that the cable can be drawn through (mps -07)
Theqie 7 months ago
Your company should make a part that replaces the cigarette tray with an iPod dock
Shaunage87 8 months ago
I already have satellite radio installed, would it be plugged into the aux that you plugged the GTA car kit into? if possible, i would like to have both satellite radio and my iphone 4 to work in my car, thanks!
coron14 8 months ago
for mazda bt50 ,not sold in us, will it work for that???
anubhavvi 9 months ago
@anubhavvi could you please contact us via email, and we can help you!
gtacarkits 9 months ago
This has been flagged as spam show
@gtacarkits just sent a mail to gtacarkits@gmail.com
anubhavvi 9 months ago
i need it for aux in..will aux in be activated by media button on head unit??...also i have a ford in india with factory fitted 6 cd changer with similar 16 pin aux connector at back AND media button in front, will it work for that?kindly clarify as i really need this.
anubhavvi 9 months ago
@anubhavvi sorry this kit is meant to work on a Mazda only, no Ford.
Thank you
gtacarkits 9 months ago
@gtacarkits an australian company is selling the same aux in adapter unit for both the 2007 mazda and the head unit in my car.So i guess what works for mazda should work for my system as well since they both have similar port and media button(mine has inbuilt 6 cd changer, dont know about mazda).I have attached the pics and the link is below.
anubhavvi 9 months ago
This has been flagged as spam show
@gtacarkits i have sent a mail to gtacarkits@gmail.com .Kindly go through it once. I think this will work
anubhavvi 9 months ago
Hellow, i have an 2007 mazda 3, does it works in my mazda 3 2007? im so interested, im from panama
davidmora64 9 months ago
@davidmora64 Yes it will work on your car :)
gtacarkits 9 months ago
Hellow, i have an 2007 mazda 3, does it works in my mazda 3 2007? im so interested, im from panama
davidmora64 9 months ago
We are glad to hear :)
gtacarkits 10 months ago
Installed in under an hour! Great installer video that helped guide me & my sister install this quickly and easily!!
ibellizima 10 months ago
Glad to hear that the kit works great :) you can always submit your feedback to our email!
gtacarkits@gmail.com
gtacarkits 10 months ago
It works great. I just got done with the install. This video helped out alot. Thanks
DemonEyez69 10 months ago
great video! im just wonndering, what exactly does taking that cord out of the back of the radio do?
LazerBeem85 11 months ago
@LazerBeem85 This particular car had factory AUX (that comes out under the arm rest). Therefore we had to replace it with our kit that has both AUX and iPod compatibility. If you car does not have factory AUX, this port should be empty.
gtacarkits 11 months ago
@gtacarkits i have an 05 mazda 3 that i got a few months ago. and what arm rest are you talking about? thanks
LazerBeem85 11 months ago
@LazerBeem85 the arm rest is the middle console between the seats. If your car(like mine) didn't come with an auxiliary input standard you will have nothing to worry about.
kilmer84 11 months ago
@kilmer84 yes that is the same as mine. thank you!
LazerBeem85 11 months ago
This kit worked like a charm! I do like to take things apart but not in cars and this only took me an hour to do. Super easy install. The only issue I had was trying to figure out how to get the cd player back in with the wires and box out of the way and I used a little bit of Velcro then tucked them in the back to the left. I also put the wire thru the ash tray and didn't have to drill anything just pulled out the red plastic piece and fed the wire thru that. I have a 2005 mazda3 sp23 w/o aux.
kilmer84 11 months ago
@kilmer84 what red plastic piece are you talking about?
LazerBeem85 11 months ago
@LazerBeem85 If you take a look at the video at the 7:47 mark when he takes the ash tray out or change tray as I use it for you can see that it has a red window on the top which where the light comes into the ash tray. That red plastic piece will slide off leaving an opening to feed the wire thru. Any other question feel free to ask as I was new to this process too.
kilmer84 11 months ago
i have an 04 mazda 3 and I don't have a aux input only a tape/md.
Will that be fine
huronmak 1 year ago
@huronmak Yes, it will be even easier to install as your AUX input would be empty.
gtacarkits 1 year ago
Would this work on a Mazda s Grand Tour 2008 equip with the Bose system?
riv5743 1 year ago
nice
ramirezjimmi 1 year ago