Excellent presentation! Question: Do any of the models feature a scroll lock wheel where a person can lock the trigger into one position when spraying instead of having to pull the trigger back?
@ACLTony It is best to contact the Blick Product Info department - they can assist you will all your product questions. You can email at; info @ dick blick . com or cal toll free 1-800-933-2542.
If my HP-CH is anything to go by, Iwatas although well engineered have poorly produced user instruction manuals. I further comment on this matter at this video posting: Iwata airbrush Hi-Line HP-CH
Do u know, where could I purchase spare parts for iwata guns? Any europe web page. I bought some from ebay, but I doubt about the quality(needle is very soft, nozzle - diferent size,etc.)
@pmtz2005 This model comes with a 0.35 mm needle/nozzle combo. You can use an optional 0.5 mm set. To order these parts through Blick Art Materials, go to our website at dickblick . com and type in the following item numbers; for the nozzle 25025-0500, nozzle cap 25025-0200, and needle 25025-0400. Thanks
@pmtz2005 The answer to your question is "yes", but as always, make sure to use the proper viscosity and appropriate cleaner. If you have further questions regarding Iwata products or want assistance with your project, please contact our expert Product Information team at info @ dickblick. com or 7-800-933-2542. Thank you!
@KingBootysmack For best advice and to discuss your project, please contact our Product Information team at 1-800-933-2542 or email them at info @ dick blick. com.
@devinb1690 i got a HP-CS and i use it for scalemodels and wargaming figures. I love it, a very good all around airbrush. I use it for priming and camoflage on larger areas, tanks, planes and also to make fine lines such as shadows on figures etc. Good quality mid-range airbrush. Aslong as you clean it properly and treat the needle with care it will last you a life time :)
Excellent presentation! Question: Do any of the models feature a scroll lock wheel where a person can lock the trigger into one position when spraying instead of having to pull the trigger back?
ACLTony 3 months ago
@ACLTony It is best to contact the Blick Product Info department - they can assist you will all your product questions. You can email at; info @ dick blick . com or cal toll free 1-800-933-2542.
BlickVideos 3 months ago
Over rated and over prized, Badger is equally good and at a more realistic prizing too!!!
BigAndTall666 5 months ago
im planning on getting one, which is better hp-cs or HP-C plus , this is for paint model kits
regards
Say0n 8 months ago
If my HP-CH is anything to go by, Iwatas although well engineered have poorly produced user instruction manuals. I further comment on this matter at this video posting: Iwata airbrush Hi-Line HP-CH
sonicstep 9 months ago
Do u know, where could I purchase spare parts for iwata guns? Any europe web page. I bought some from ebay, but I doubt about the quality(needle is very soft, nozzle - diferent size,etc.)
forest313131 10 months ago
hi, can the kustom cs needle and nozzle be interchangeable for different sizes?
pmtz2005 11 months ago
@pmtz2005 This model comes with a 0.35 mm needle/nozzle combo. You can use an optional 0.5 mm set. To order these parts through Blick Art Materials, go to our website at dickblick . com and type in the following item numbers; for the nozzle 25025-0500, nozzle cap 25025-0200, and needle 25025-0400. Thanks
BlickVideos 11 months ago
@BlickVideos
thank you for the part numbers I'll be oredering soon...one more question, can the kustom cs spray an automotive clear?
pmtz2005 11 months ago
@pmtz2005 I am waiting for the vendor to confirm this answer - I'll post a response as soon as I hear back.
Thanks
BlickVideos 11 months ago
@pmtz2005 The answer to your question is "yes", but as always, make sure to use the proper viscosity and appropriate cleaner. If you have further questions regarding Iwata products or want assistance with your project, please contact our expert Product Information team at info @ dickblick. com or 7-800-933-2542. Thank you!
BlickVideos 11 months ago
Which one would be best for both shirt painting and car painting?
And Wat type of paint would I need to buy?
KingBootysmack 1 year ago
@KingBootysmack For best advice and to discuss your project, please contact our Product Information team at 1-800-933-2542 or email them at info @ dick blick. com.
BlickVideos 1 year ago
Snap-On airbrush are good to.
LilDiazFly1 1 year ago
They all look great, but I wonder which is best for kit and model buiding; nothing more.
mrtrek64 1 year ago
@mrtrek64 sparmax
arronpoh123 1 year ago
Is a gravity fed airbrush as comfortable to work with as a gravity fed one.
JustWonderingHowToDo 1 year ago
hmmm, which airbrush would be best for painting models and miniatures? I want a gravity feed, so I'm looking at either the HP-CS or the HP-C Plus.
devinb1690 2 years ago
@devinb1690 i got a HP-CS and i use it for scalemodels and wargaming figures. I love it, a very good all around airbrush. I use it for priming and camoflage on larger areas, tanks, planes and also to make fine lines such as shadows on figures etc. Good quality mid-range airbrush. Aslong as you clean it properly and treat the needle with care it will last you a life time :)
TinyArts 1 year ago
Hello Robert! Which one is your favored one?
I use Micron SB for everything including painting on airplanes. Iwata is all you need when airbrushing.
Be well,
Jurek
MsJurek1 2 years ago
I have two Iwata airbrushes: an HP-B and a Kustom Micron CM. Awesome stuff.
cristianocollarin 2 years ago
Hey that is Robert Paschal. Took a airbrush workshop with him in Beacon NY. He was a fabulous instructor, learned tons.
corneyea 2 years ago