Kubik Coil (Spinning) 007

[andrei0404]

херь какая-то

[softcellelectrical]

What was being tested was not described or clarified. It would seem that it is a motor with the windings offset 45 degrees. I think the windings themselves lose efficiency due to their lack of precise spacing. I would like to see more in the form of actual HP to wattage used. I think more careful winding would result in better efficiency.

Best of luck to you and keep up the good work

John

[MrStevestocks]

wow you made a motor lol

[drumatic86]

it's amazing, but somehow it's not..

[JoshAlfred27]

Dude, if you have enough copper I can send you my code for another pattern just like it, and you can make it. Its basically {x, x+3, x+6} modulo 9. I can send you full matrix. Maybe I'll put it in a video. ;)

[magicfngrz]

stupid freakin advertisements! >.<

[roro879]

man I think your gonna invent something super usefull if you keep it up,what are you a scientist or something?Anyway cool vids

[123abcdme]

@kubikop is the newman motor producing electricity as it spins?

[123abcdme]

is the newman motor producing electricity as it spins?

[dremoraman1]

If made on a large and powerful enough scale, do you think this design just might be able to serve as a replacement for the internal combustion engine?

[90malteser]

turn it in to a speaker again but with the full coil

[w23trhfyer]

What proves this? .. can show that if you give power to a magnet through a coil that can rotate? .. it may be exotic, I do not see innovation

[EaglesNestOne64]

It only spins at that frequency because of resonance. Really nice experiment man.

[shepherdsmusic]

I put a perfectly round hallow pure gold sphere that screws open and close at its middle and placed a grape inside of it and placed it in the middle of the rodin coil and left running on a 6volt current for 60 days and when I unscrewed the Gold Sphere. The grape was in perfect condition. We are still understanding what kept the grapr so fresh for so many days. Please help in our research.

[ShawnHydedotcom]

with enough power at altra high frequency you could create a gravatational field could you not?

[ShawnHydedotcom]

how much power are you using to spin this?

[durelino]

i am totaly lost. what is the differnce between this and a standart electric motor? should i just read more abou this Macro Rodin coil?

[waldropij]

what happens when you put your finger in it?

[ddstar]

why do you call it a kubik coil?

[the10thplanet]

Have you considered fabricating an Aluminium doughnut & filling it up with a ferrofluid then applying your experiments?

[dmgcat]

Can you explain your test equipment a little bit whats it do and how much for one?

[dzedajusr]

how you make toroid coils? do you have a machine that makes it for you?

[harrisonbee]

what would happen if you put that under a 2 liter tornado water vortex contraption. wonder if it would change the time of the spin of the water?

[myjizzureye]

Get off the drugs you fuckwit

[cosmolv]

This is a Marco Rodin coil...!

[kubikop]

read the more info

[birmingham77]

Kubikop you are the greatest! you are a legend. The more i watch your video's the more i feel like your my best freind. ?

[64298]

I just bought 14,000 feet of AWG 24 cross connect wire. Most in 1,000 foot spools. Wires wrapped around each other in each spool means 2,000 feet of wire per spool. If interested in making any type coil from this contact me for a price much better than Ebays.

[64298]

The big question is not how fast it spins a rotor but how much rotor torque the coil can produce. To be useful as a motor it must be able to produce the needed torque to spin power something besides itself. I am working in that direction presently.

[kubikop]

I think it has the capability to turn a gyroscope 360 in each directions.... just need a gyro to test...

Keep up your good work thought...

;-)

[sanctusen666]

for what wite z at end of each word?

you is a gay??

[kubikop]

Dont understand the z thing?

Thanks for wacthing

Paul,,

[birmingham77]

sanctusen666 you are very gay.

[ShpinxiLotus23]

is the amount of power required to get the magnet spinning enough that if you had the magnet attached to some kind of dynamo charger you could eventually remove the primary power source and have the power generated from the dynamo feeding back into the coil? or is that not realistic, even with capacitors and stuff?

[jehovajah]

So at the centre of the spiral you should create a cylindrical tube of cross wires with an open middle into which you can place experiments. The winding could prove problematical as the cylindrical weave develops so maybe just 2 coils of the spring to start with. What do you think?

[jehovajah]

Ok Paul, know you got a lot of projects but this one is really important. I am asking if you could do a rodin winding on a spring? Using a large car or lorry spring do a winding that is not toroidal but spiral. The winding is marked out the same way on each of the coils of the spring as you look at the circular cross section of the spring but the winding passes from coil to coil in the rodin sequence ytravelling up and down the spiral. This should produce a cylyndrical tube of cross wires at cen

[jehovajah]

Thanks keep up the good work. you will be able to test the rodin coil design with 2 oscillators and see if the third coil being off is really necessary, as rodin claims. The question is is it the winding or the vector arrangement in the centre that is important. Three coils on will test this. Also does the signal need to be pulsed or out of phase. Cant wait to see more,

[kubikop]

That is something I will do but I just do not have the resources at the moment dude...

Money is short, but I know I have the ability to wind the coil....

And thats the hard part, I have found I have a knack for the procession of the mundane... but No Money to be bold with it.

It is a great ideas but maybe I will have to put it on hold...

Paul..

[hypnotekk]

are u a brummie?

[kubikop]

Yeaaaah Hoaw Culd, Yawws Tell Like? ;-)

I thought My accent was not noticeable, is it bad?

Where you from dude?

Paul..

[SuperFinGuy]

Pretty Interesting idea with the coil, I can't wait for more.

[kubikop]

Thanks, I need to buy a copper or aluminum gyroscope.

If anyone knows where to get one or has one hanging around I would appreciate it.

There was a reason I wanted the Rodin Coils at 120 degrees out of phase....

Paul..

[SuperFinGuy]

A gyroscope? I guess one + rodin Roil = awesomeness?

[kubikop]

It means you can point the magnet in any X,Y or Z position..

Major awesomeness...

Paul..

[rroge5]

i wonder how precise this method of aiming a magnet could be

[kubikop]

Very Exact....

Paul..

[morpher44]

I found an "Electric field from a solenoid" paper which implied that if you place a loop of wire OUTSIDE the solenoid, regardless of radius, you will observe the same EMF. If true, if you spin your magnet some other way, and use the Rodin for inductive pickup, that might be interesting. Good video!

[kubikop]

Thanks, I will do my best to get this to work.....

Paul..

[CSSRage]

Great vid, will be interesting to see how you utilize this.

[kubikop]

Thanks..

Paul..