sorry bout ur car getting stolen... hope they die of aids. anyways was pretty nice... but i pulled a 13.6 in the 1/4 on my T25 on street tires running 14 psi. with a pulsar T28 you should have been able to net high 12s. something is a miss there.
vertally same mods as me on my 13 i was wondering what sorta times id be running was gunna take it down at usc the other week but cudnt be asked to go im only 5 mins away from pod. iv got t28, full 3" exahust with tublar mainfold, stage 2 chip,fmic ,walbro 255, 1.6mm cosmetic head gasket and a hks evc 3 boost controller high boost is set to 18psi :) low is set to 8psi
what tyres you use to get the 13.504 @ 105.54mph? my s13 is 280bhp atm, got a few more bits to put on it, 555cc injectors and z32 afm and a stage 3 remap should push for 330-350 im told...educated guess at times then?? my 13 only weighs 1050kgs aswel...got 225's on the back...think i may need some wider wheels to get decent times
love the way look at your opponent after each shift, itsl ike : damn you still here you little hairdresser :D. ( nothing against elise, i drive mx5 myself, so ican say " hairdresser lol)
Haha, that thing was an EXIGE engined beastie though, he pulled 13.2 @ 103mph, which is quicker than most elises, thats why I was struggling to pull away even with 260 odd bhp!
I ran the slightly higher trap speed though at 105.5mph....
The turbo was uprated. It was a T28 off a Nissan GTiR (pulsar). Its a bigger T28 than the one on the SR20, better top end, but more lag.
Also had a Horsham Developments Stage 2 Chip, full exhaust by Apex (I think), K and N panel filter, Front mounted intercooler (12 litre I think).... Boost was raised via bleed valve to 14.5 to 15psi approx.
Nice power from ca m8, i drove in friends glanza 320hp with td04 turbo ,i think, there was huge turbo lag, but the yoke can move :D. not so important in drag race i think.
Were you able to drive it on daily bud? reliable setup?
nice one, deffo getting myself ca or sr, thought i do prefer 180sx s13 body... but i will have to go for import then.... and insurance is not nice on imported cars here :(
I can import you a 180sx from Japland if you wish, I import cars and vans now from Japan... I imported the single turbo RX7 on my other videos..... :)
well i am in ireland bud. got a few people here that can import for me, but ill try to get uk s14/s13, if ill get cheap s13 ill pop up rb25 convertion on it. insurance companies became really pain in ARSE lately if you mention jap import...
oh yeah - what a pitty..!! anyway - im not understanding that u didnt get any wheel spin and tires havent just burnt rubber on one place without moving - what uve done with clutch?? if its not secret:P ;)
there is no secrets, its a standard original clutch, never had to change it.
there was a bit of hopping, very small amount of wheelspin, the car has the power in the top end not torquey, its a revvy car so doesnt spin up so easy, bit like my current RX7.
Im about to try and buy one of these off ebay, its 300 miles away from me and so I wont know just how good or bad the engine is until it gets here but I plan on stripping the engine down and rebuild to as high quality as possible, ive heard the engines are pretty bad when it comes to reliability
The engines are actually quite reliable, just get an uprated oilcooler, fmic and a good fuelpump.. if you have these and a good oil and checking oil temp it will be fine!
funny how people talk shit and want to race with you and this is the internet??!!!! does it make them feel better by threatening to race you by typing it here?
I'd race your 200 sx, I have an 240sx sr20det conversion. I have a little over 400 HP off the fly and around 351.36 hp to the tires. let me know whats up, thanks
surprised the elise with the exige engine didnt get a quicker time than 13.5... i run a s1 elise with 165bhp unprated toe links and r888's and i run a 13.2 personal best at shakespeare raceway exige engine has throttle boddies and 200bhp engine..... it should have done better, nice 200sx i miss mine.
nissan made the best turbo 4 and i cant wait until the year 2011 as they working on a next gen 200sx (silvia)...wow i cant wait but i can tell you stock engine starting point is 165rwkw. i work at head office so shhhhhh.
sorry bout ur car getting stolen... hope they die of aids. anyways was pretty nice... but i pulled a 13.6 in the 1/4 on my T25 on street tires running 14 psi. with a pulsar T28 you should have been able to net high 12s. something is a miss there.
akumin12 3 months ago
Why did you turn on your A/C while on the track? Thats a major drag racing no no. Condensation drips on the track and creates a road hazard!
calking 3 months ago
@calking It didn't have "air conditioning" you arse!
bodleytunes 3 months ago 2
Yaaaa buddy!
apexi2 4 months ago
congradulations you own maybe the only video on youtube with out any dislikes
xbreezy420 10 months ago 2
@xbreezy420 not anymore :(
KeekazMedia 8 months ago
nice mph for a 13.5 probly got a bit more in it
allwaysallin 1 year ago
nice mph for a 13.5
allwaysallin 1 year ago
that is a very good time for a ca18det mate.
SkunkyDeluxe 1 year ago
Impressive time and well driven. Those 1.8 vvtis can be a pain. Congrats !
Cheers,
Octav
OctavXSW 1 year ago
yeeeah, SX rules ! i had two of em
rogerabdullah 1 year ago 8
Nice
JWBakkum 1 year ago
close race.. nice run, and sorry to hear about the car. i had no choice but too sell mine since i was moving to another country =/
helvek 1 year ago
vertally same mods as me on my 13 i was wondering what sorta times id be running was gunna take it down at usc the other week but cudnt be asked to go im only 5 mins away from pod. iv got t28, full 3" exahust with tublar mainfold, stage 2 chip,fmic ,walbro 255, 1.6mm cosmetic head gasket and a hks evc 3 boost controller high boost is set to 18psi :) low is set to 8psi
tom50a 1 year ago
nice run
jhaze918 1 year ago
Decent run looks like a ferrari next to you probably wasnt though
Brendon00000 1 year ago
what tyres you use to get the 13.504 @ 105.54mph? my s13 is 280bhp atm, got a few more bits to put on it, 555cc injectors and z32 afm and a stage 3 remap should push for 330-350 im told...educated guess at times then?? my 13 only weighs 1050kgs aswel...got 225's on the back...think i may need some wider wheels to get decent times
jpmelsdon 1 year ago
god!Launch controll!
Kpkika 1 year ago
Awsome, glad to see another CA18 boogieing down the strip. I love that little engine!
LiquidNeon00 2 years ago
love the way look at your opponent after each shift, itsl ike : damn you still here you little hairdresser :D. ( nothing against elise, i drive mx5 myself, so ican say " hairdresser lol)
Shad0whearth 2 years ago
@Shad0whearth
Haha, that thing was an EXIGE engined beastie though, he pulled 13.2 @ 103mph, which is quicker than most elises, thats why I was struggling to pull away even with 260 odd bhp!
I ran the slightly higher trap speed though at 105.5mph....
good old dayz!
bodleytunes 2 years ago
nice. only 260 but pulls like a train bud! thought is your one ca or sr m8? Will be getting myself s13/s14 to keep a company to mine mx5 :)
Shad0whearth 2 years ago
@Shad0whearth
Mine was a CA18DET.
The turbo was uprated. It was a T28 off a Nissan GTiR (pulsar). Its a bigger T28 than the one on the SR20, better top end, but more lag.
Also had a Horsham Developments Stage 2 Chip, full exhaust by Apex (I think), K and N panel filter, Front mounted intercooler (12 litre I think).... Boost was raised via bleed valve to 14.5 to 15psi approx.
bodleytunes 2 years ago
Nice power from ca m8, i drove in friends glanza 320hp with td04 turbo ,i think, there was huge turbo lag, but the yoke can move :D. not so important in drag race i think.
Were you able to drive it on daily bud? reliable setup?
Shad0whearth 2 years ago
Yeah I used to drive it to work 2 times I week no problem!!
bodleytunes 2 years ago
nice one, deffo getting myself ca or sr, thought i do prefer 180sx s13 body... but i will have to go for import then.... and insurance is not nice on imported cars here :(
Shad0whearth 2 years ago
@Shad0whearth
I can import you a 180sx from Japland if you wish, I import cars and vans now from Japan... I imported the single turbo RX7 on my other videos..... :)
bodleytunes 2 years ago
well i am in ireland bud. got a few people here that can import for me, but ill try to get uk s14/s13, if ill get cheap s13 ill pop up rb25 convertion on it. insurance companies became really pain in ARSE lately if you mention jap import...
Shad0whearth 2 years ago
very veryyy nice buddy:) I got basicaly same spec s13 - about 260BHP stage 2 engine;) but still Im bit impressed by ur launch - really nice job;)
razielus20 2 years ago
Thanks mate :) had a bit of practise for it, loved that car, pitty when it got stolen and trashed by scum :(
bodleytunes 2 years ago
oh yeah - what a pitty..!! anyway - im not understanding that u didnt get any wheel spin and tires havent just burnt rubber on one place without moving - what uve done with clutch?? if its not secret:P ;)
razielus20 2 years ago
there is no secrets, its a standard original clutch, never had to change it.
there was a bit of hopping, very small amount of wheelspin, the car has the power in the top end not torquey, its a revvy car so doesnt spin up so easy, bit like my current RX7.
bodleytunes 2 years ago
i will race you with my sr20det t25 10 psi
I FELL BETTER NOW LOL
is this what your talking about oceansfront
i see this on so many videos
jf4786 2 years ago
Why you running a sr20 with a t25? t28 is the proper turbo for that engine....T25 are off a ca18det
1STB11TME 2 years ago
Because some of the JDM 180SX has the sr20 but had the T25 hybrid turbo.
The S14 has the T28. And I think the black top 180 had the T28.
The Red top sr20 had the T5 (I think).
bodleytunes 2 years ago
Nice.
Im about to try and buy one of these off ebay, its 300 miles away from me and so I wont know just how good or bad the engine is until it gets here but I plan on stripping the engine down and rebuild to as high quality as possible, ive heard the engines are pretty bad when it comes to reliability
nos4speed 2 years ago
The engines are actually quite reliable, just get an uprated oilcooler, fmic and a good fuelpump.. if you have these and a good oil and checking oil temp it will be fine!
Sebbe40 2 years ago
This comment has received too many negative votes show
Stage 2? Hahahahahaha. Way too much Gran Turismo.
I can't believe some companies actually refer to products in stages.
Pure stupidity.
BenMacKerras 2 years ago
Go and complain at Horsham Developments website or SXOC ... you big tit.
bodleytunes 2 years ago
cloooosee jajajajaja thats a good damn race jajaja
guillermo556 2 years ago
this is a ca18det right?
cacapotopichi 2 years ago
Correct, Ca18det with a T28 turbo from a Nissan Pulsar. Stage 2 chip, 15 psi boost. :)
It was in 2005 though, that car is long gone... twas stolen by joyriding teenagers and trashed.
bodleytunes 2 years ago
funny how people talk shit and want to race with you and this is the internet??!!!! does it make them feel better by threatening to race you by typing it here?
anyways great video.
oceansfront 2 years ago
Great vid! Nice drive!
mk24v 2 years ago
WAS THAT A VAUXHALL WHEEL LOL
JONESYTMD 2 years ago
F*ckin yeeeeea! Nice race
Energonorama 3 years ago
I should hope your sr20 would win, its a better engine. Rather have a 180SX than yours though! ;)
Regarding the "race": Think your a bit late venom. Missed the boat.
This video was made in august 2005.
Since then, the car was stolen and dumped found in 2006, no point in repairing.
Since then I've had a TD06 Skyline GTS which would have given your 240 a good run for its money.
And now I have arriving an FD3S Rx7 with around 400 at the wheels.
So if you want to race the Rex, then no prob!
bodleytunes 3 years ago
I'd race your 200 sx, I have an 240sx sr20det conversion. I have a little over 400 HP off the fly and around 351.36 hp to the tires. let me know whats up, thanks
venomisgod 3 years ago
surprised the elise with the exige engine didnt get a quicker time than 13.5... i run a s1 elise with 165bhp unprated toe links and r888's and i run a 13.2 personal best at shakespeare raceway exige engine has throttle boddies and 200bhp engine..... it should have done better, nice 200sx i miss mine.
Ash111s 3 years ago
He did get a 13.2 later on in the day, which would have beat me (to the line).
I always got a faster terminal speed though, so I was catching him up all the way.
Basically he got the jump on me at the beginning, and if he got a big enough lead I wouldn't have had time to catch him up.
I think he got a best of about 103.5mph while I was on 105+ mph. :)
bodleytunes 3 years ago
it got stolen!!! No lojack?!
BaddieAss 3 years ago
nice launch there mate, why do you use the handbrake? like whats the way there? :)
insejnas 3 years ago
Because the clutch is nearly biting and I need to hold it on the line without it rolling over it.
Quicker launch if you let the clutch out a small amount.
bodleytunes 3 years ago
nissan made the best turbo 4 and i cant wait until the year 2011 as they working on a next gen 200sx (silvia)...wow i cant wait but i can tell you stock engine starting point is 165rwkw. i work at head office so shhhhhh.
negroskyline 3 years ago
it was a lotus elise but it had an exige engine and cams etc in it :P
bodleytunes 3 years ago
nice one, what was the other car, couldn't quite tell. You seemed pretty happy to beat it though lol.
Demondal 3 years ago
13.5 on stage 2! nice work
jonnyc200 3 years ago
nice!
Weiqunw 3 years ago
very nice launch there mate looks like you done that a few times before
japdrifters13 3 years ago 7
come on the CA's
hondabus 3 years ago 2
ca18det engine.
:)
bodleytunes 3 years ago
good man!!
Tzefri84 3 years ago
ca18 or sr20 man??
Tzefri84 3 years ago
nice race man:)
nissan4ik 3 years ago
nice ;)
ArmandasK 4 years ago