How Flymentor (Flight Stabilizer) Work

[RotorHead2652]

pLEASE PLEASE PEOPLE ,Unless you have that disorder were you fall asleep standing up or you have trouble with sight then fine get the flymentor , but its annoying now im seeing more and more people getting it because they are to scared to crash , 3 words Training undercarage , and Simulator these are all you will need to learn how to fly , Otherwise people are just getting lazy

[Afrocanuk]

I imagine it will be good to get this device for vintage helis' in which parts are no longer available. My two oldest helis' are 16 & 18 yrs. old respectively.

[y512516]

@Afrocanuk

and scale helis too

[ravijagdev]

the best remote i recommend is the walkera wk-2801.

[Afrocanuk]

Does Flymentor have a built-in head-locking gyro also?

[ravijagdev]

@Afrocanuk yes it does

[bassax7045]

got flymentor ,but sftware doesnt work on windows 7 64 bit ,,any idea how to solve this ?

or if not maybe a link to somewhere where they can help solve this problem ?

[kezibus]

Flymentor ist schon was feines!

Wenn jemand Interesse an einem Flymentor hat, ich hätte noch 2 abzugeben.

Also schreibt mich einfach an.

Mein Youtube Accountname ist kezibus.

[imprint2finished]

i bought one of these but the problem is the usb cable would not connect to my pc. the sad thing is there is no costumer service from kds. any help would be much appreciated.

[davidiyo]

I have a 3D Flymentor and a Belt Cp v2, but I can not configure it well. Could you show me how you have your connections made between the Flymentor and Belt CP? I think I'll go crazy. Thank you.

[calvinkong]

@davidiyo

If all the connectors were plugged correctly, you should fly it easily!!

Do the servos rotate corectly? If they do and the performance still not good and hard to control, you had better to adjust the setting of "Manual override ability" at the tab "Advance" to greater. I could fly it well after adjusted the setting.

[JohnB5304]

What Tx and

RX are you using and where do you plug the sevros? what channels on the main board.

using a Specktrum Rx?

[calvinkong]

@JohnB5304

I'm using the China made 9 ch Flysky FS-TH9x RC.

[hopstar01]

Can this be used with my standard Esky 6ch. 2.4ghz transmitter ?

[calvinkong]

Basically, it can!

But I've not test it because I've no such RC.

[calvinkong]

Sure!

[ripghost]

How do you find the flymentor? Does it save you from crashes or is it just used to give you more stability to flight? I am thinking between this and the co-pilot any thoughts? Thanks.

[calvinkong]

I buy it in Mainland China.

In principal, it can. But I've never fly the 450 with it because I ave not finish repair the heli yet!! he he he!

[kevinko612]

i have DX6i not the ccpm control,still have same problem.

[calvinkong]

If you could not fix the problem, I would lke to suggest you change the orientation of the sensor (gyro like device) to suit the direction of servos.

[kevinko612]

hi i have t-rex 450 and dx6i control , can you tell me how to setup , i try many time ,my servo still reverse. thanks k

[calvinkong]

You had better to check that to cancel the CCPM function at your transmitter. Then reset the Flymentor as factory setting at the Flymentor setting page. After reset, set the parameter again. It is because sometimes the Flymentor do not work normal after any setting and need reset.

[mbmatesa]

Thank you my friend ... quick response ..

[mbmatesa]

Can this use with Futaba 7C 2.4 Ghz ..thank you ...

[calvinkong]

I guess it can because the instuction manual mention that it can use with Futaba and JR RC. If availabe, let me know your email address and send you a copy of the instruction manual.

[mavelluanco]

hello companion, and conpro this issue and my question is if it makes properly configured, is very conplicado make it work, thanks friend

[chowderek111]

installation completed.

hope to see you finish the setup.