@japanesepoptart It is a slow burning colored fuse that is cut into short pieces to put into shells and mines instead of stars. It cannot be made at home.
hey can you give me the comp for this i made up my own its 50% kno3, 30% Mg flaked , 15% charcoal , 5% sulfur . it burned a white blue . actually if you give send me some simple comps cause i can only get KNO3 , Mg , aluminum , charcoal ,sulfur ,zinc ,titanium. really idont have access to the nitrates other Kno3 and i can buy stuff off the internet. have you ever used a pearl streamer star
did you have any problems with the magnesium reacting with the wet comp. Because I have been making zinc based starts and the zinc always reacts with the water and heats up, produces hydrogen gas and destroys my stars. Any way let me know because I want to try it. And if you have used zinc let me know your trick.
@PoopSwindler remember the zinc-combustion reaction wont work if there's to much liquid present besides i haven't had a problem they burn blue green for me i've only made them twice though.
@TheCombineify hey sorry I don't even remember watching this video I must have hit comment on accident. thanks for pointing that out. Maybe you could be a little nicer. It was an honet mistake. Have a nice day.
thank you and well what im makeing its more of ground based stuff i call what i do "ghetto pyrotechnic" lol its like cheap but they look pretty cool i use sparler powder and match heads and patasum nitrate.
Put off making fireworks until you have a better understanding of them. And at your age get your parents involved. Things will go much better for you that way.
hey ben can i make stars from normal black powder because i have made much meal but i forgot that i want ti make stars so can i make stars with normal ready bp and charcoal? and nice vid
mmmhhh my stars burn a bit like tt stars but they dont ignite in shells in starmines they lokk pretty good and i used a bit mg for a sparking effect but they dont ignite in shells can you help me?
Did you use the normal water/dextrin to bind these stars, and was the magnesium coated? Do you think if I used uncoated magnalium and bound with red gum/alcohol there would be any problems?
I used liquid laundry starch as binder, and the Mg was uncoated but large grained. There was some reaction occurring as the stars dried, but it settled down. With red gum I doubt there would be any reaction at all.
can i cut yours" go-getters" with the mix of 25 alchol and water and use it in a 2/3 ''shell but i think they ignite too fast i gonna make some biggers to " give in looks"
It is for s second time fuse because the Chinese use these shells and their fuse is terrible. PyroDirect carries good time fuse so I only need to use the one hole. The other I lightly plug with paper and paste over it. It's not likely the fire would get into it with a few layers of pasting.
Another excellent vid. Does using AI rather than MG deter the glitter effect at all? Oh and excellent intro dude, you should put NightHawkInLight Productions, or A NightHawkInLight Production.
Nice just one question i have never tried with my magnesium to make stars becuse it stands a label on it that you are not gona mix it with water becuse it will create gases that can easly ignite is that true? It also stand on some aluminium i have just got. Ps sry my english.
That is true. It is possible to use Mg powder, but it must be coated in linseed oil and also many times boric acid must be added to the composition to prevent a reaction.
if you put tiny chunks of mg ribbon with boric acid and linseed oil would that work to create bright flashes? or would the miniature strips even ignite?
Very nice and odd that I was testing glitter last night... :P They are certainly more aggressive in their burn charcteristics that their Al/MgAl counterparts, and very aesthetically pleasing. 5*
The intro - great timing with the riff/creamora but i think you could alter the fuse burning to something like a shell or something. Regardless, a great video 5*
this proves ground tests dont mean shit
ThePyromaniac500 3 months ago
how do you make your glitter stars, composition?
Anthony82949 10 months ago
i havent tried the winokurs yet ill give them a shot
gothbro111 1 year ago
what was the comp for the first star mine? They look great
gothbro111 1 year ago
@gothbro111 That was winokur 20 with Mg replacing the MgAl. The traditional comp looks better.
Nighthawkinlight 1 year ago
you could always just throw a bunch of sparklers in it...see what happens then haha
their magnesium...that would be interesting.
Fr0z3nFr0g 1 year ago
Quite a "violent" tail.
fireworkgalore 1 year ago
Where did you get such a slow burning fuse?
fireworkgalore 1 year ago
@fireworkgalore That is falling leaves fuse.
Nighthawkinlight 1 year ago
@Nighthawkinlight Oh, okay. I'll have to get some of that.
fireworkgalore 1 year ago
@Nighthawkinlight
What IS falling leaves fuse, and can you make it?
It seems pretty...
japanesepoptart 1 year ago
@japanesepoptart It is a slow burning colored fuse that is cut into short pieces to put into shells and mines instead of stars. It cannot be made at home.
Nighthawkinlight 1 year ago
hey can you give me the comp for this i made up my own its 50% kno3, 30% Mg flaked , 15% charcoal , 5% sulfur . it burned a white blue . actually if you give send me some simple comps cause i can only get KNO3 , Mg , aluminum , charcoal ,sulfur ,zinc ,titanium. really idont have access to the nitrates other Kno3 and i can buy stuff off the internet. have you ever used a pearl streamer star
jsmithmilitary 1 year ago
@jsmithmilitary Try cannonfuse for a good list of compositions. I have not made pearl stars.
Nighthawkinlight 1 year ago
Very good intro, i'd like to see more of those.
pyrocrazyUSA 2 years ago
new intro is super and i like it very much you are best firework man on the planet for me :) 5/5*
Vr6godlike 2 years ago
did you have any problems with the magnesium reacting with the wet comp. Because I have been making zinc based starts and the zinc always reacts with the water and heats up, produces hydrogen gas and destroys my stars. Any way let me know because I want to try it. And if you have used zinc let me know your trick.
PoopSwindler 2 years ago
If you smell ammonia it's reacting with the nitrate. 2% boric acid in the water used to wet the comp will prevent that reaction.
Nighthawkinlight 2 years ago
great, I hope that works! Now I can try to make my zinc stars again! Thanks so very much for the help.
PoopSwindler 2 years ago
@PoopSwindler remember the zinc-combustion reaction wont work if there's to much liquid present besides i haven't had a problem they burn blue green for me i've only made them twice though.
jsmithmilitary 1 year ago
This comment has received too many negative votes show
totally gay dude
RileyAnnDavison 2 years ago
@RileyAnnDavison hey fuck you
TheCombineify 1 year ago
@TheCombineify sorry I don't even remember watching this video! I must have hit submit or something on accident. Nice video though!
RileyAnnDavison 1 year ago
@TheCombineify hey sorry I don't even remember watching this video I must have hit comment on accident. thanks for pointing that out. Maybe you could be a little nicer. It was an honet mistake. Have a nice day.
RileyAnnDavison 1 year ago
@RileyAnnDavison im sorry bute he she makes good vidios.
hmm
TheCombineify 1 year ago
what is that "TT"? im really new to this
pur1ty2134 2 years ago
It stands for tigertail - Which is a type of star with a long orange tail.
Nighthawkinlight 2 years ago
ah ok, i see... thx
pur1ty2134 2 years ago
Tiger Tail
44KNO3
44C
6S
6dextrine
Assassins112 2 years ago
thx^^
pur1ty2134 2 years ago
I love it how i call then fireworks and has all these propernames for them...
nebonit 2 years ago
i wanna go to this guys fireworks party :P
simsohi 2 years ago 8
I think your TT charchoal has to be in a finer mesh.
The rest is very nice!
sanderzwolle 2 years ago
its because the light is very great and the camera doesnt quite deal with it to well lol
armadillo4495 2 years ago
how does the blue beam appear? the one on 0:30
Roxxo88 2 years ago
the reflection of light on the lens
xboxgamerman 2 years ago
wat are te parts and the camicals you youst??
zwartje66100 2 years ago
am ende sieht das ding aus wie was verwelktest oder totes :D
sacitarius 2 years ago
great tails!
flyboy911911 2 years ago 2
Beautiful :D
Cashcow55 2 years ago
very nice
6blackened66 2 years ago 2
make a vid on how to make
pyrocrazy321 2 years ago 2
I have one. Look up starmine in my videos.
Nighthawkinlight 2 years ago
intro is great 5*. you should have seen my first 3/4" mine, it was d1 glitter. it was great
TheBombBros 2 years ago
whoa, 0:50
KJsawi 2 years ago 3
love the tails, man
BackyardChemistry 2 years ago
Thats really cool at :50
airsoft132 2 years ago
the one downside i see at 1:00 is all the falming hot stuff comin down... you know?
sam3619 2 years ago
kool koolkoolkool nigg nigg
sajarab123 2 years ago
Are you serious that first mine was only 3/4 inch? What diameter stars? Awesome tails for small stars!
Whoooosh63 2 years ago
Thanks. The stars were about 3/8" in diameter I believe, and about 1/4" thick.
Nighthawkinlight 2 years ago
thank you and well what im makeing its more of ground based stuff i call what i do "ghetto pyrotechnic" lol its like cheap but they look pretty cool i use sparler powder and match heads and patasum nitrate.
MrRandomguyTv 2 years ago
ya i stared makeing fire works since yester day lol and well wtf do you use for getting the shit in to the sky im only 12 so bare with meXP
MrRandomguyTv 2 years ago
Put off making fireworks until you have a better understanding of them. And at your age get your parents involved. Things will go much better for you that way.
Nighthawkinlight 2 years ago
lol yeh, loving the respect for the equiptment; "gettignt he shit into the sky" and "patasum nitrate" o_O
Darcshadow5 2 years ago
LOL...
yeah...
sure would hate to mess with any "patasum" based chemicals! XD
Lighttheskyup 2 years ago
yeah! LOL I was thinking the same! lol what is "patasum" anyway?!?! lol
wormkilla 2 years ago
its called lift powder AKA granulated black powder
PyrotechnicVids 2 years ago
i dont understand why more people dont watch your videos people could learn from them
themanginaman 2 years ago
Why thank you
Nighthawkinlight 2 years ago
cool intro
pyroboytodumax 2 years ago
like the intro
tobyMacBallerina 2 years ago
is this just basically the same stuff thats in sparklers?
trooperx666 2 years ago
Nice man love the new intro!
lpo146 2 years ago 9
BEAUTIFUL
festatitularighaxaq 2 years ago 3
where do you get/how do you make stars
cooliodefabio123 2 years ago 2
look it up
skarrip 2 years ago 3
This has been flagged as spam show
skööööööööööööönnn
nemimy520 2 years ago
sköööööööööööööööööönnnn
nemimy520 2 years ago 2
Your intro is awesome, you should use it in every video! =D And those stars are wicked too.
o0Dreamlike0o 3 years ago
hey ben can i make stars from normal black powder because i have made much meal but i forgot that i want ti make stars so can i make stars with normal ready bp and charcoal? and nice vid
enonano 3 years ago
Try adding about 20% extra charcoal and that should work fine.
Nighthawkinlight 3 years ago
ok i will try it :)
enonano 3 years ago
mmmhhh my stars burn a bit like tt stars but they dont ignite in shells in starmines they lokk pretty good and i used a bit mg for a sparking effect but they dont ignite in shells can you help me?
enonano 3 years ago
They are likely underoxidized or still damp. Also try priming them.
Nighthawkinlight 3 years ago
priming whats that :D
enonano 3 years ago
Coat them in BP for better ignition.
Nighthawkinlight 3 years ago
ok i will try it today thanks!!!
enonano 3 years ago 2
they burn they< ignite thanks
enonano 3 years ago 2
He told you to add charcoal, but don't forget the binder!
o0Dreamlike0o 3 years ago
i know i always use dextrin :D
enonano 3 years ago
Cant you do a video when you doing Easy stars ? :) i mean out of easy matrials like ... KN03 and something ? :) if its work
mini1agge 3 years ago
Look up tigertail stars.
Nighthawkinlight 3 years ago
like the intro
magicman957 3 years ago
nice'
vuurwerkfan9999 3 years ago
Did you use the normal water/dextrin to bind these stars, and was the magnesium coated? Do you think if I used uncoated magnalium and bound with red gum/alcohol there would be any problems?
TyrantBB 3 years ago
I used liquid laundry starch as binder, and the Mg was uncoated but large grained. There was some reaction occurring as the stars dried, but it settled down. With red gum I doubt there would be any reaction at all.
Nighthawkinlight 3 years ago
whats the song in the beginning of the vid?
snuffying 3 years ago
It's just a bit of random playing I did. Sorry, I couldn't tell you how I played it.
Nighthawkinlight 3 years ago
im talik about purple or blue ones not these
FranciscoSRO2 3 years ago
Yep I understand
Nighthawkinlight 3 years ago
can i cut yours" go-getters" with the mix of 25 alchol and water and use it in a 2/3 ''shell but i think they ignite too fast i gonna make some biggers to " give in looks"
FranciscoSRO2 3 years ago
Yeah that should be fine
Nighthawkinlight 3 years ago
It is for s second time fuse because the Chinese use these shells and their fuse is terrible. PyroDirect carries good time fuse so I only need to use the one hole. The other I lightly plug with paper and paste over it. It's not likely the fire would get into it with a few layers of pasting.
nickvtintelenhotmai 3 years ago
as usual great job I can only hope
Jeffrocket55 3 years ago
Omg so nice!
MakkeSk8 3 years ago
Another excellent vid. Does using AI rather than MG deter the glitter effect at all? Oh and excellent intro dude, you should put NightHawkInLight Productions, or A NightHawkInLight Production.
elementalrage 3 years ago
I'm not sure, I've never used Al in winokur 20. It is meant to be used with MgAl. I suspect course Al would simply delay the glitter.
Nighthawkinlight 3 years ago
Nice just one question i have never tried with my magnesium to make stars becuse it stands a label on it that you are not gona mix it with water becuse it will create gases that can easly ignite is that true? It also stand on some aluminium i have just got. Ps sry my english.
errorswe 3 years ago
That is true. It is possible to use Mg powder, but it must be coated in linseed oil and also many times boric acid must be added to the composition to prevent a reaction.
Nighthawkinlight 3 years ago
if you put tiny chunks of mg ribbon with boric acid and linseed oil would that work to create bright flashes? or would the miniature strips even ignite?
BuiltCrazy 3 years ago
Maybe. It all depends on the star composition.
Nighthawkinlight 3 years ago
GREAT VID NIGHT loved the mines.fitting gitfiddlin' on the intro too.Chalk it up as yet another quality vid.
oahuguy 3 years ago
Thank you
Nighthawkinlight 3 years ago
Not bad. I like 'em a bit bigger i want to feel the thump in my chest.
I love the way tiger tail looks but despite it being one of the simplest formulas i have never gotten it to work. i think i over wet it...
crazyboy0602 3 years ago
Sure, I like larger mines as well. I just didn't want to use to many of my stars up in testing.
Nighthawkinlight 3 years ago
great intro man! is that you playing guitar in it?
FunkyRice 3 years ago
Yes indeed it is. Thank you.
Nighthawkinlight 3 years ago
Cool intro and another great vid
5595525 3 years ago
GREAT INTRO!
progamer246 3 years ago
you used to be just plain nightwhawk dident you?
pyroduck7 3 years ago
Nope, always have been nighthawkinlight.
Nighthawkinlight 3 years ago
i liked them alot. and the intro was awesome
cancheeb 3 years ago
lovley vid, and intro! why did you change account though?
pyroduck7 3 years ago
Change account? What do you mean?
Nighthawkinlight 3 years ago
very nice intro,very nice min 5 stars favorited
pyrogeniuses 3 years ago
intro stars test all good
simonmic001 3 years ago
loved it!
AirrowRocket 3 years ago
Very nice and odd that I was testing glitter last night... :P They are certainly more aggressive in their burn charcteristics that their Al/MgAl counterparts, and very aesthetically pleasing. 5*
kcnkickthecat 3 years ago
hey man nice vid i benn waitingfor a new one haha 5/5
WiLsOnPrOdUcTiOnS666 3 years ago
haha the intro is legit
guting 3 years ago
Very Nice INTRO,great MINES 5 STARS
LIONELTRAINS4LIFE 3 years ago
The intro was nice, but a little long, and I don't like intros :(
Fireworks are great, and I love them :D
theducktapeking 3 years ago
Haha its only like a 15 sec intro
deweypotts 3 years ago
nice stars
nice intro
5*
chr1s510 3 years ago
very nice intro, and i really like the starmines. keep up the great vids 5* :P
rocket278 3 years ago
That has a very hot afterburn. Arnt you worried about catching things on fire?
deweypotts 3 years ago
Not this time of year I'm not, it's always wet here. Though I would rather the stars broke up a bit more. I'll remember that for the next batch.
Nighthawkinlight 3 years ago
The intro is a great idea, loved it, and the stars are really interesting, they seem to crackle.
TheTIsAPyro 3 years ago
yeah man. great intro! like the music and it goes well with your name... bravo!
lytherenth1 3 years ago
The intro - great timing with the riff/creamora but i think you could alter the fuse burning to something like a shell or something. Regardless, a great video 5*
Parker221 3 years ago
Thanks for the input. I may do just that. I'll likely be playing around with intros for a while.
Nighthawkinlight 3 years ago