PMR Stock Board Tutorial

[paintballkidego1]

my eyes go from red to blue is that normal if not please message me back a.s.a.p

[jaelopr69]

man thanks for that if it wasn't for you I wouldn't know how to configurate My Proto PMR thanks man!! this was very helpful

[PFCbouchard2251]

5:45... "...well dwell, uh RED dwell..." "tee-hee" lol... video was helpful too.

[101lens]

what is best mode???????

[SuBZoNeGaMiNg123]

@101lens melenium

[AlvinSpitoon]

Wait so if the left switch is up your in programming mode and if its up your in mode selection?

[motocrossmagic]

can anyone tell me should i swap a bt-4 combat for a pmr 07?

[johncaswell49]

thanks, good vid worked great

[spyderballer27]

nice vid bought a used one this helped a ton thx you

[mena123456789]

A i just bought a 08 pmr, and when i turn my gun on it stays green, than when i shoot it it just blinks green. How do i turn the eyes on?

Thanks

[gatorboy1444]

same thing happens with me. i think our eyes dont work. im gonna check pbnation and ill tell you if i find anything.

[armbrost]

me to

[itzburley]

take your eye plates out and just clean them

[motocrossmagic]

08 pmr? its an 07 they didnt make an 08

[grantmarine8]

this was helpful. thanks

[jesusotowatley]

guys , can i use this great tutorial for a PM7 ?

its looks the same proccess..

GREAT video

[erikekman111]

awesome video helped alot!

[aodkiller2]

good vid this really helped thanks

[Hilmi008]

anyone want to chat

i cant watch this video NG

[PBSk8addict]

thx man ive been wanting to change my pmr to psp but i hate reading directions. this helped a lot!

[booch137]

Did you guys not get manuals with your PMR's? There is no 13 bps. 3 clicks for 12 bps, 4 clicks for 14 bps. Factory setting is 15 clicks or 20 bps. Max is 20 clicks (30 bps)

[pbkidd11]

How many clicks for 13bps

[pbpat23]

good vid, even tho i dont have a pmr

[KillerP0ncho94]

Good

[Emo8Kief]

Dude I Go On The Comp Right.

But How Do You Do Thst Man You Rock!

[computergeek1337]

Hey, I no longer have the PMR I sold it and bought an angel a1.. and I then I sold my a1. Currently I do not have a gun because I am trying to concentrate in my sr. year of high school.

[SGCDriver]

why dont you just test if there is nxl mode???

[jaygray13]

when you first get the gun what setting is it on ?

[NaStYisBeAsT]

semi

[SGCDriver]

nice vid !!!

[pb1231993]

would you trade it for an slg clam feen neck 2 piece proto barrel ..cp on\off asa and a breand new NXe ambassador gear bag

[paintswimmer]

how many clicks can u do in each parameter?? what happens if i put down the switch that says 1??

[cooliowill13]

hey could turn the lights on so i could see

[Grix45]

Very helpful, thx

[godinezmaster]

O and lol srry but i have some questions what type of air does it take???? the pmr

[lilminiman]

Compressed Air, Use an HPA tank

[godinezmaster]

I dont know how to like lower the velocity or fps on mine because at my paintball feild near me it has to be under 300fps so probly like 280fps is what its supposed to be at and i dont know how to lower it so if u could tell or sho me cause idk?????

[brndncraven]

under the regulator take an allen key, not sure what size and there is a spot for it, if u turn it to the left its faster then if u turn it to the right its slower but the factory default should be fine unless u screwed with it

[naeimjaber]

yo thnks so much the vid was mad helpful

i can actually work the board AND know wht im doing

[kadoty123]

I bought the PMR SE the other day but I cant use it until my next paycheck because I have nothing for. I gotta buy the hopper, tank, balls. I am pretty exited but I dont want to wait.

[JEWDOOMAGIK94]

hey when i screw back on the handle where the board is, there is a gap. how do i fix that??

Im afraid mud or wateris going to get in there

[JEWDOOMAGIK94]

NEVERMIND.  I FOUND OUT THE PROBLEM

[isuckatpaintball]

k thanks dude yer vid helped a lot i dont care wut other plp say but use my gun a mellenium mode i rock with it so ty i give u a 5/5

[kyled57]

yo thnks so much the vid was mad helpful

i can actually work the board AND know wht im doing

[jonnieBAMF]

i have a question, if you want to change the mode to lets say mellenium mode but you are already on psp mode. would you have to pull the trigger once to get it to mellenium mode or whould u have to pull it three times because it starts back from the begening?????

[computergeek1337]

3 times cause it starts back at the begginging

[JEWDOOMAGIK94]

it resets so you would have to click it three times

[gioant5]

should i use high or low pressure on the pmr?

[PhazeEr]

high pressure... only thing low pressure will do is sell lower when you dont use it anymore...

[MrKody1]

cool

[kornerfeed]

dude if you put c02 on pmr it will fuck up you have to use compressed air its what you put on electronic uns dumb ass

[sharkhunter199]

no shit

[beanjean564]

thx awesome video it really helped me out with my PMR

[SockerRush8]

Please sod off?

[shrednslash]

wow i didnt no we turn it counter-clockwise thanks man

[xSHADOWNETx]

if you put co2 in it you just screwed up your gun compressed air/nitro nitro cleanse the air system compressed air is what you fire ( i use nitro)

[kansaspballer]

Does a PMR have to run on compressed air or can it run on C02? I'm thinking about getting one and not sure if I have to have a somewhat expensive tank.

[bmx00bergstein]

i prolly sound like a noob but whats the cheapest hopper that will let this gun go to its full potential stock everything except barrel.

[computergeek1337]

Dont cheap out on a hopper, your going to want something that can feed the paintballs in really fast

[paintballkicksass]

@bmx00bergstein id go with one of the best id say pinokio,rotor,magna,etc...

[madman53]

awesome vid keep it up i really cant find full auto though

[TorHonor]

thanks it was very helpful

[86boyz]

Great vid btw...im thinkin about gettin this but one question...can you get compressed air and nitrogen at dicks sporting good? if not, where is a country wide store I can get easy access to compressed air or nitrogen?

[palmer6994]

i dont think you can.. they dont have the licenses or w.e to fill high pressures.

but u can get a scuba tank and get it filled at a scuba shop nd then fill your tank numerous amounts of times before having to refill the scuba tank

[GGBULLETz]

gawd damn that shit is confusing ...id rather have my old reliable and easy to function vs2 than my pmr ...im cluless with this thing

[Paintballg0d]

frame for it looks gross =/

[Mandorelian7]

how do you get it to back to factory settings?

[shank5150]

so everytime ure goin to imput a mode ie. yellow rof

it sais factory default is at 15 which is 20bps.. and i want to get it at 24bps which is 17 do i have to click it 17xs or do i have to click it 2xs bcus factory wise its at 15.?

--

Sent from my Helio Ocean

[computergeek1337]

u click it 17 times

[mdawso2]

can you go back to the part where you tell me to turn the screws counter clockwise to remove them?

i never knew that

[computergeek1337]

what ru getting at?

[mdawso2]

nothing dude, i'm just messing.

good video actually, it was very helpful

[computergeek1337]

o ok thanks

[pbdynasty37]

you look like alex fraige

[paintballf4rlife]

wow you sound like a computergeek

[vergani2]

im waiting for my pmr to arrive(shipping)....but i know this may sond stupid 2 som people, but can i chage it from semi-auto, to ramping, to nxl without opening grip?

[konryu123]

nope

[HxCpMr]

no. you gotta hit ur dip switch.and i have had enought of this video. his voice is so fucking annoying

[HxCpMr]

no. you gotta hit ur dip switch.and i have had enought of this video. his voice is so fucking annoying

[SoLEkid94]

nahh

[GangstaUSA1]

this is he same for the PMR SE

[voodoo996]

good vid great job. i plan on getting one soon and this helps. thx

[TainoPRHC]

I just got my PMR SE and your instructions helped a bunch. Thanks!

[computergeek1337]

no problem

[tweekzilla077]

first of all get a camera, 2nd go into a room where theres light, you poor peice of shit. MISTER COMPUTER GEEK, GET A FUCKING LIFE

[computergeek1337]

wow sounds like its that time of the month for you... the lighting is fine, 2nd im rich, and finally computers own and your just pissed about your shitty life so u decided to take it out on me lol... everyone else thought the video was great... lol

PS... I am using a camera dumb fuck

[voodoo996]

dude ur a fucking loser. fuck off. and how the fuck is he not using a camera. Dumbass

[OSKOcolot]

shut the fuck up tweek, your the poorest peice of shit ive ever seen, get the fuck out ya fucking noob, shove your dick into your ion and killyourself

[Ffrex]

NICE and thanks!

[piroflash93]

whats a good trigger sensititvity?

[computergeek1337]

the best thing to do is play around with it and see what YOU like personally... I tried my friends sensitivity and i hated it... u gotta see what fits u

[radioactivepaintball]

thanks for the vid

do you know if the board settings are the same on the pmr special edition?

[computergeek1337]

i think so im not 100% sure

[nubblisious2234]

nice fro...lol

[computergeek1337]

lol thx... its gone now I cut it all off

[fattydude101]

trade my upgraded ion for it and ill add and evo 3 hopper

[computergeek1337]

no thx.. but ne other trades if u wanna offer but not likely... BTW i have a UL frame , UL barrel, Function feedneck, dye ASA on it now, ima put the video of it up soon

[silentsniper03]

ok i got the firing mode but this may seem stupid but what is dwell?

[silentsniper03]

im confused on changing firing modes. what do i do.

[flights23j]

yo how do i lower my dwell

[computergeek1337]

I explained how to change all the settings in the video... please watch it and u will have your anwser

[armydog888]

yes! i did it!i wish you could explain more how to put the originall mode back *i couldn't change it back for a while*

[jsurkan7]

Thanks for the Video. It helped me out.

[iskatebig]

please i need help .....some 1 send me a message dont just post under this....when u get it out of the box is it semi? and what do most paintball arenas allow u to use? full auto and epaline psp and all the modes of the pmr

[plourde1]

what does psp and all these other modes mean??...plz reply!! ty

[pilotdude2394]

i just got a new pmr se and is the reg supposed to be loose?

[paintballguy321]

ok i was wondering something i just got my pmr today and the thing you put the battery pack in supposed to be wired into the pmr board cuz mine wasnt and its a pain in the ass to get it into the board idk i think i got mine broken

[SST1447]

one Q for you... my friend just bought a pmr and ill be getting pretty much the same gun only with a vitue board and on it, it says millenium mode wich u talked about. we were both woundering what exactly millenium mode was

[computergeek1337]

millennium mode is a ramp mode that is capped at 15 bps but u need to pull 7.5 bps before the ramp kicks in. bps= balls per second

[ProtoRail11]

does anyone no y my pmrs board wont screw in all the way well it does but its not placed in enough for some reason.

[piroflash93]

hey nice vid helped alot. what do you do if one of the wires in the board breaks? b/c 2 of them the red and black one broke the ones that connect to the battery. so do what do i do?

[computergeek1337]

Im not exactly sure... I would try taking the battery out and hooking em back together... then use some electrical tape to keep it together

[piroflash93]

so if there together the eletric current will still work?

[computergeek1337]

idk hard to say... u can try it... but make sure to use electric tape and not real tape... and do this at your own risk.. im just taking a guess so dont do it if your not confident cause u might end up frying the board... the best thing to do would be to take it to your local paintballin place

[Psyco726]

the reason he turned the eyes off was beacause there wasnt a ball in the chamber

[JesterOfTheMaggots]

do u have to turn thew eyes off to shoot?

[Psyco726]

no u can shoot with the eyes on

[Lostanconfused97]

hey what rate of fire should i leave it on?

[castijoe2]

hey ty, i just got a brand new pmr and i didnt want to screw with it, so thnx the manual is kinda confusing

[Psyco726]

THANK YOU~!!!!~

[GS18]

thanks alot dude that helped me alot cauz the manuel freaken confused me but i still got to figure out what psp and all those settings mean, can anyone help me on that if they get a chance, you can hit me up at my screen name its BlueCaliRider thanks and appreciate it

[dcsilva10]

no

ima get one though

and thanz that helped im too lazy to read sometimes

[ramgoat20]

the PMR dosent cum wit a on/off asa does it?

can some on let me no?

[computergeek1337]

no it doesnt

[dcsilva10]

no it doesnt im getting one that does and putting it on my pmr

[RockstarPaintball]

w00t ty so much

[RockstarPaintball]

ty so much umm can u send me message how to put the balls per second to like 30

[rdog678]

that helped i just odered mine

[LivinGI]

Great Job Man

[balr]

thx im ettin one of those but red 4 x-mas this vid will definitly save me some time

[pbstar7777777]

hello hat i have a pmr and i set my dwell to 5 and trigger to 1 and it works great

[BPizzle91]

yoo man nice job with this video.. you know your stuff man and that helped me out with my pmr so much and you said that if the trigger sensitivity is higher than you will shoot faster correct?

[computergeek1337]

yes and no, it just means that the higher the sensitivity is, the "lighter" u will need to pull the tirgger to get it to fire. However, set it to high and you will put the gun into full auto. Play around with it and see what u like.

[LivinGI]

hay what's millennium mode?

[dcsilva10]

its when the first pull of the trigger its full auto then the rest of the pulls goes into ramping

[pbstar7777777]

thanks for the info

[pbstar7777777]

thx alot

[pbstar7777777]

every comment i tried to say was rejected

[computergeek1337]

u have to wait for me to approve it sorry :(

[pbstar7777777]

what do u put ur dwell too?

[pbstar7777777]

what is ur dwell 1?

[pbstar7777777]

wait shouldnt everyone set their dwell as 1?

[pbstar7777777]

hellohat i set my to 10 and 10

[pbstar7777777]

i set my pmr to trigger=10 dwell=10 mode=psp bps=30 its awesome

[pbstar7777777]

hello hat i set my trigger and dwell to 10 and psp 30bps

[pbstar7777777]

hellohat i have a pmr and i set my trigger sensitivity to 10 and dwell to 10 i shoot a psp 30bps its sick!!! }=]

[pbstar7777777]

computergeek thx for making this vid it helped me alot well not really and hellohat i set my trigger sensitivity too 10 and dwell is 15 i have a pmr too if u didnt know

[hellohat123]

what do you personally put your trigger sensitivity too and your Dwell

[hellohat123]

thanks for the help... btw what do you think is a good trigger sensitivity and Dwell for tournament paintball?

[hellohat123]

is dwell somewhat inter-linked with the fps of your gun?

[joocee102]

Great job man.Keep up the info ..You have helped me out alot.

[Viktor7507]

a lot of help man thanks!

[introdye]

thanks so much dude, you just made my gun so much better :P cheers bro

[coco56560]

u r a big help i was mad at my fried during a match and i put it on rampign so it shot him loke 40 times and hes like wtf and im like sorry it was on ramping lol thk for the help :/

[mxboy317]

great tutorial but wats dwell?

[computergeek1337]

Dwell is the amount of air used in each shot... the higher the dwell the more your air will go down with each shot.

[pdmko]

if i set my dwell low and hv my velocity udner 300 wud the pbs still shoot under 300? wt do u recomend for the dwell settin?

[fadokv]

im thinking of buying a pmr and im wondering if it is a good choice. so u have any problems with the gun. should u get eyes with it

[macarulla1045]

thanks you help me a lot

[braddenson12]

yah dude, this was a big help. I just got my PMR upgraded with critical trigger and dye UL barrel, but I couldnt be in psp mode and i forgot what I was doin, so I pulled out my sidekick and came to this... thanks again

[driverz00]

thanks dude you were a big help!

[FRANTIC1991]

kinda ling, rambling on..jk thnks..

[hotrod332]

what is ur dwell set to

[computergeek1337]

Its the default I forgot what it is :(

[FabledCalamity]

nice vid helped me out alot... than you

[123wowplayer456]

I was just wondering what a good dwell and trigger sensitivity is.. Thanks

[computergeek1337]

The stock settings are pritty good for beginners

[123wowplayer456]

I just ordered one and I was wonder what is a good trigger sensitivity setting and a good dwell setting? thanks..

[saucy2727]

whats dwell?

[computergeek1337]

How much air is used per shot

[saucy2727]

gotch ya

[saucy2727]

yes lots of info i like it

[jordanvilla]

dude how many shots do you think you can get out of a 45/3000 tank

[computergeek1337]

Out a 45/3000 tank... I dont think you would get a whole ton... I have a 45/45 and I would be lucky to get 1000 out of it...

[computergeek1337]

I would say if it was full 700+.. but thats just an educated guess

[metalmosher3]

great vid man helps alot

[jordanvilla]

dude great video lots of info

[computergeek1337]

Thanks

[iownnubs43]

hey arnovitz if you adjust the velocity to low it will start to leak out of the back cap that happened to me if it does just turn up the velocity

[n8dog545]

how efficant is the gun?

have u had any problems with it?

would i need a replacement feedneck?