It's a littlebit outdated video now, so when I made this, it was on 2.2 I think (now I'm using only 2.3 roms because of the bluetooth headsets won't work properly with 2.2 custom roms [they are skipping the sound sometimes what is irritated me a bit]). Since the bootloader unlocked and other things, you don't have to do this procedure if you flash custom kernels.
Oh, okay I read your previous post, so now I know you're on custom ROM. Try to reflash from stock, or unlock bootloader (IMPORTANT!!! If you have got a line written under the battery like 11w28 or above [11w29, 11w30...etc] forget unlocking bootloader because you will permabrick your phone: sony made a new bootloader protection for these x8s that can not be unlocked)
Hi iam using android 2.3.7 and I followed all the steps but in the end it says "operation not permited" please help if it work i can donate for you really iam ready just help
You have to disassemble the whole phone starting from the back. You can easily find dissassemble guide if you search some in google.
Note that you won't change the chip! You change the digitizer, e.g. the screen of the phone. They say it's a littlebit hard to pull of the screen from the frame, so you have to be careful at that step. Good luck!
BTW I'll send you the link to the XDA thread that guides you through each step.
Yes it's posible. Some people changed it at XDA forums, and they said the "operation was succesfull". BTW you can buy Cypress digitizer on e-bay or other bid-page. Just ask the seller that which digitizer has he got.
quem fez este vídeo tutorial está de parabéns!!! Mas tenho algumas dúvidas: se eu instalar o módulo, irei perder a garantia do fabricante? e como eu desinstalo o módulo e deixo como antes? Por favor me responda o mais rápido posssível!!
goog video man.. i look everywhere for this.. had the file for multitouch but didnt knew how to activate it.. btw using the last froyobread version on this.. thanks a lot !!
am using cyanogen mod 7 android 2.3.5 updated xperia x8
am trying to enable multitouch in my xperia;viewed your video and i tried alot but while coding it out on terminal emulator its showing that "cant open "
please help me to come out of this!!!
i have checked and found it that my xperia is cypress ;
Now this video is not too relevant. I mean almost all Custom ROMs includes the module, and is enabled by default. I personally don't know what is the prob., but take a tour to xda-developers x8 forum, and I'm sure you'll get help there (don't forget to use the SEARCH button before you ask there anything).
It's a littlebit old ROM now. Have you tried FroyoBread (the original by doixanh) out? I think it's the best 2.2 ROM, and the module has been built in, so you don't need to insmod anything.
Else I don't know why it is doing it to you. It should have been working. Maybe some bug in the ROM, I'm not sure.
@Asycid the description only explain how to get it worked for receiving the call... not how to make it automatically load after the phone reboot.. coz i already edit the sw_config.sh insmod /system/lib/modules/ax8mt.ko and yeah it worked for receiving call but after reboot the setting gone and no more dualtouch i have to keyin the insmod on the terminal emu again..
@Asycid im using froyobread version 0.30 im not sure from doixanh or the one modded by racht.. can u recommend to me which latest rom is most stable and allow me atleast to OC my x8 min is 748mhz which is im using currently
üdv. nemtudom visszarakni a telót eredeti re mer amikor kikell huzni usb-ről majd kikapcsolni visszadugni és back gombot nyomni ott nemtörténik semmi a gép érzékeli hogy bevan dugva de nemakar továbbmenni a PC companion az x8 ra meg nincs SEUS. :S tudsz segíteni?
Bármelyik SEUS-t leszedheted, mivel univerzális. Észrevettem én is, hogy az X8 oldalon inncs SEUS, de leszedtem másik telefonhoz, és utána magában a SEUS-ban simán kiválasztod, hogy X8, és kész :)
I don't know what problem you mean. If it bricks you phone (you can't turn it on), the you just have to use SEUS (official SonyEricsson update software) and install the original ROM with about 3 clicks. So no, you can't destroy your phone with this.
BTW your warrantee will be void with this, but as I wrote you can restore the phones original soft and then you'll get back the warrantee. :)
You can't really brick your phone until you unlock the bootloader, but backup will be good, if you can't boot it, and don't want to lose all contacts/sms/etc.
So, just get in Xrecovery/CWM and do a backup first.
Másold be a /system/lib/modules/ mappába a letöltött filet (ax8mt.ko) és írd be ezt Terminal emulatorba. Fontos a kis- és nagybetűk közötti különbség!:
su
insmod /system/lib/modules/ax8mt.ko
Ezután ha működik, akkor írd be ezt (insmod /system/lib/modules/ax8mt.ko) a /system/etc/hw_config.sh fileba egy új sorba. Fontos, hogy új sorba! Remélem segítettem :)
@Asycid Is there any other solution for me? I mean any other package or something that improves the pinch-to-zoom to dualtouch or replace the thing with a proper multitouch? Cause pinch-to-zoom sucks. Thanks again! Subscribed already.
I have miniCM 2.2.1 rc1. It already has a built in fake dual touch. Do I have to remove it somehow to get cypress? If I have to remove it, can you teach me how o.o pleease :)
hey man! ive already copied the ax8mt.ko to system/lib/modules, but when i type the insmod command my phone reboots! :( do u know why is this happening? :( pleasee help me! thanks in advance.
Hello, I saw Beyomo11's comment, and I think i have same problem, it doesn't wokr for me, phone rooted, running MiniCM6, all files and all lines in their place, but no dual-touch
PLEASE !!!!!!! CAN YOU MAKE A COMPLETE TUTORIAL : STEP BY STEP . I DON'T KNOW ANYTHING ABOUT HOW TO DO IT ; I DON't UNDERSTAND ANYTHING ( LIKE BACKUP, xRECOVERY,etc) I WOULD BE VERRY HAPPY ;) PLEASE HELP
I hv rooted x8 2.1.1, its it able to get dual toutch on this with ur method? i type in su thn skips to the other line thn i type in the thing wher is file is n i get permission denied even if i type su
In theoretically yes, you can, if your phone is rooted. For some people it doesn't work with the stock 2.1 ROM, and I don't know why. Check XDA-developers' forums to solve the problem, and use the search button! :)
sorry for being stupid but I just want to make sure if I install it to hw_config.sh will the bugs be fixed? is there any hazardous consequence if I install it to hw_config.sh when I'm having the two bugs when I loading it to the terminal? I'm using MiniCM6-1.0.1 Rom. thanks!
All bugs will disappear. There is only one thing you have to care: insert the "insmod... etc" command to an empty line in hw_config.sh. If you don't, the module will not work. There's no other consequencies, so try it out! :)
I use FroyoBread v012 from doixanh. I'm not using the v016 because I think (seriously, I don't know for sure) it uses more memory for the system and leave less to applications.
I don't want to make multitouch running on startup (haven't changed my hw_config.sh) because the screen shuts down after a while as if I weren't touching it at all!
Can I create a *.sh file with these commands (su and insmod...) so that I can run it everytime I need to enable multitouch instead of writing them in the terminal?
I created and executed (with root explorer) a *.sh file with these exact lines but it didn't work. What did I do wrong? Should I write it differently in the *.sh file?
If you don't write the insmod command in hw_config.sh, then you can't load it at boot, and the bugs are remains (the "Unresponsive Touch Screen at calls" and the "Screen Turning Off" problem! If the module loads when the phone is booting up, then there aren't any bug, and yes the "screen off" problem will disappear too in that case... So just try it. If it won't work for you, then simply delete the line that you write in your hw_config.sh :)
Do u like jazz music
MathsGameerz 2 days ago
it said to my enjoy dual touch but nothing :( it's because i have 2.1?
konstantinosGATE1 2 days ago
@konstantinosGATE1
Yes. I wonder why don't you try some custom roms? The X8 will be a really good phone then.
Asycid 2 days ago
Comment removed
konstantinosGATE1 3 days ago
They said export Path=/data/localbin:$PATH after that. What about it ?
Hahahehehohoism 4 days ago
tnx very much, it's working, and it's so easy to do it. :)
LIKE! :)
rapermann 2 weeks ago
i dont get it.
anka326 2 weeks ago
LOving it !!!!Awesum subbing!!!
Ameya890 2 weeks ago
when i type su it says premition denied what do i do
mrjonishow 3 weeks ago
whats that theme? I know that this is Launcherpro
TheMazeTV 1 month ago
where can i find these numbers on the battery or on the phone? please reply
marow98 1 month ago
@marow98
Under the battery, on the phone.
Asycid 1 month ago
thx it works! THUMBS UP!
TheMazeTV 1 month ago
this really work :)..thanks!!!!
MizsLyea 1 month ago
Is that android 2.2 or 2.3 ???
BlackDragonKiller1 1 month ago
@BlackDragonKiller1
It's a littlebit outdated video now, so when I made this, it was on 2.2 I think (now I'm using only 2.3 roms because of the bluetooth headsets won't work properly with 2.2 custom roms [they are skipping the sound sometimes what is irritated me a bit]). Since the bootloader unlocked and other things, you don't have to do this procedure if you flash custom kernels.
Asycid 1 month ago
thank you so much .. this is really good .. now my smartphone are ready with multi touch ,,,
nothingtose147 1 month ago
dude why it say init_module system/lib/modules/ax8mt.ko failed (operation not permitted)
TheLalapoo123 1 month ago
@TheLalapoo123
There are two things cause this:
1: You have to enter "su" (without quotes) in the terminal before you try to insmod
2: You're on stock 2.1 ROM (install any 2.2/ 2.3 custom rom). BTW there is a workaround somewhere in XDA if you want to use this module with stock.
Asycid 1 month ago
@TheLalapoo123
first u need to type
su -> enter
system/lib/modules/ax8mt.ko -> enter
its working on Froyopro v2.4.
dr3772 6 days ago
what a song!! i feel like i'm playing SIMS
X8xperiaX8 1 month ago
This has been flagged as spam show
Operation not permitted..
whats the problem ?
Help T,T
xpjie 1 month ago
that was extremely helpful many tank's t you
mo7amedabdelkhalek 1 month ago
This has been flagged as spam show
problem same as marow98 (operation not permited)
please help Asycid
rvlopes06 1 month ago
operation not permetid / plz help :i subscribed "
marow98 1 month ago
@marow98
There are two things cause this:
1: You have to enter "su" (without quotes) in the terminal before you try to insmod
2: You're on stock 2.1 ROM (install any 2.2/ 2.3 custom rom). BTW there is a workaround somewhere in XDA if you want to use this module with stock.
Asycid 1 month ago
@marow98
Oh, okay I read your previous post, so now I know you're on custom ROM. Try to reflash from stock, or unlock bootloader (IMPORTANT!!! If you have got a line written under the battery like 11w28 or above [11w29, 11w30...etc] forget unlocking bootloader because you will permabrick your phone: sony made a new bootloader protection for these x8s that can not be unlocked)
Asycid 1 month ago
Yes
marow98 1 month ago
Hello Mr this tutorial didnt helped me because it says that invalid module file in the terminal of course
giassamakos 1 month ago
Maraw98 are you using gingerxperia v20
allan1995able 2 months ago
Hi iam using android 2.3.7 and I followed all the steps but in the end it says "operation not permited" please help if it work i can donate for you really iam ready just help
marow98 2 months ago
why it always say (operation not permitted) ? help plsss.... :(
SuperKijiya 2 months ago
not works!! whyyy
malaysiaboy88 2 months ago
"it writes "operation not permitted
after I write "insmod..." on terminal
whats the problem ?
MrBalistra 2 months ago
@Asycid So, how do they change sypnatic to cypress?
DarkArmy619 2 months ago
@DarkArmy619
You have to disassemble the whole phone starting from the back. You can easily find dissassemble guide if you search some in google.
Note that you won't change the chip! You change the digitizer, e.g. the screen of the phone. They say it's a littlebit hard to pull of the screen from the frame, so you have to be careful at that step. Good luck!
BTW I'll send you the link to the XDA thread that guides you through each step.
Asycid 2 months ago
@Asycid Thanks for your help! I ill try it now..
DarkArmy619 2 months ago
Is it possible to change the sypnatic chip??
DarkArmy619 2 months ago
@DarkArmy619
Yes it's posible. Some people changed it at XDA forums, and they said the "operation was succesfull". BTW you can buy Cypress digitizer on e-bay or other bid-page. Just ask the seller that which digitizer has he got.
Asycid 2 months ago
How to know whether mine is sypnatic or Cypress?
DarkArmy619 2 months ago
It f**kin works!!!! thanx!!
haziqsephiroth79 2 months ago
Great..... It' really working!!!
amarben123 2 months ago
quem fez este vídeo tutorial está de parabéns!!! Mas tenho algumas dúvidas: se eu instalar o módulo, irei perder a garantia do fabricante? e como eu desinstalo o módulo e deixo como antes? Por favor me responda o mais rápido posssível!!
meu e-mail: jucazastrow@gmail.com
MrEpipabaquigrafo 2 months ago
Hi, I've done everything you said and when I open a terminal emulator and type to "su" he writes that "permision denied" Help please.
Csodas2 2 months ago
hah..! is real..! thnx you.! :D
1234LeParkour 2 months ago
does it work on games? ... and is there any problem with your phone ?
ToniTerDaL 2 months ago
@ToniTerDaL
Working with games: see my other X8 video.
Problem with the phone? No, abslutely no.
Asycid 2 months ago
thanks
zzdragonzz92 3 months ago
goog video man.. i look everywhere for this.. had the file for multitouch but didnt knew how to activate it.. btw using the last froyobread version on this.. thanks a lot !!
riku88tj 3 months ago
how did u know that your x8 was cypress
puja9077 3 months ago
hi
am using cyanogen mod 7 android 2.3.5 updated xperia x8
am trying to enable multitouch in my xperia;viewed your video and i tried alot but while coding it out on terminal emulator its showing that "cant open "
please help me to come out of this!!!
i have checked and found it that my xperia is cypress ;
HELP ME!!!!!!!
Ujjwal1010 3 months ago
@Ujjwal1010
Now this video is not too relevant. I mean almost all Custom ROMs includes the module, and is enabled by default. I personally don't know what is the prob., but take a tour to xda-developers x8 forum, and I'm sure you'll get help there (don't forget to use the SEARCH button before you ask there anything).
Asycid 3 months ago
@Asycid
Hi,
I have few important questions about that module...
Listen I have a white xperia 8 model: e15a.
And most important:Android 2.1
1) Do i need to update my andro version to 2.2 or 2.3? or it can work on 2.1 too?
2) Does it work for games?
melniXniper 3 months ago
FILE EXISTS!! WHAT'S WRONG :(
mily1295 3 months ago
és hogyha nincsen androzip mappám akkor mit csináljak?:(
Tomi960503 4 months ago
my phone says permision denied
HELP
TheJerknoid 4 months ago
@TheJerknoid mine worked as well . .:) typed su Then allow Then type insmod (one space between)/sdcard/your ax8mt.ko path
fradiocey 2 months ago
It's a littlebit old ROM now. Have you tried FroyoBread (the original by doixanh) out? I think it's the best 2.2 ROM, and the module has been built in, so you don't need to insmod anything.
Else I don't know why it is doing it to you. It should have been working. Maybe some bug in the ROM, I'm not sure.
Asycid 4 months ago
Hey.. do u know how to load this setting auto so that after reboot i do not need to enter the insmod on terminal emu again?
HelmetLawSux 4 months ago
@HelmetLawSux
It has been written down in the video description...
Asycid 4 months ago
@Asycid the description only explain how to get it worked for receiving the call... not how to make it automatically load after the phone reboot.. coz i already edit the sw_config.sh insmod /system/lib/modules/ax8mt.ko and yeah it worked for receiving call but after reboot the setting gone and no more dualtouch i have to keyin the insmod on the terminal emu again..
HelmetLawSux 4 months ago
@HelmetLawSux
That's strange, it should work this way. What ROM do you have? Because some roms are writing back the original hw_config file at reboot.
Asycid 4 months ago
@Asycid im using froyobread v0.30 mod by racht.. but on the boot screen it wrote floyo
HelmetLawSux 4 months ago
@Asycid im using froyobread version 0.30 im not sure from doixanh or the one modded by racht.. can u recommend to me which latest rom is most stable and allow me atleast to OC my x8 min is 748mhz which is im using currently
HelmetLawSux 3 months ago
-l? SSw
MrHamzashah47 4 months ago
I have a same problem as pakidude
MrHamzashah47 4 months ago
when i typed (su insmod etc.) it says Operation not permitted even i have a cyanogenmod7 (2.3.5)can someone help me plzzzzzzzzzzzzz
pakiidude1 4 months ago
üdv. nemtudom visszarakni a telót eredeti re mer amikor kikell huzni usb-ről majd kikapcsolni visszadugni és back gombot nyomni ott nemtörténik semmi a gép érzékeli hogy bevan dugva de nemakar továbbmenni a PC companion az x8 ra meg nincs SEUS. :S tudsz segíteni?
copyking96 4 months ago
@copyking96
Bármelyik SEUS-t leszedheted, mivel univerzális. Észrevettem én is, hogy az X8 oldalon inncs SEUS, de leszedtem másik telefonhoz, és utána magában a SEUS-ban simán kiválasztod, hogy X8, és kész :)
Asycid 4 months ago
working!!
DouglasCosta12 4 months ago
thax. dude!!! it works!!!
HelmetLawSux 4 months ago
not work in games for me :(
martinred11 4 months ago
@martinred11
It should work (except if you has Synaptics). What games have you tried it?
Asycid 4 months ago
when reboot,i nid to do it again. Do you have any way to make it automatically load module when reboot?
SUCKERFVCKER 4 months ago
thank ,bro
SUCKERFVCKER 4 months ago
Thank you! :) It works!
XtraAndro1d 4 months ago
its work to me in my Xperia X8 great job m8 tnx cheers :))
grobarmkd 4 months ago
I installed this with xrecovery
Red1996Bull 4 months ago
will there be any problem for my mobile,when i do this?
MrShriraamprabu 4 months ago
@MrShriraamprabu
I don't know what problem you mean. If it bricks you phone (you can't turn it on), the you just have to use SEUS (official SonyEricsson update software) and install the original ROM with about 3 clicks. So no, you can't destroy your phone with this.
BTW your warrantee will be void with this, but as I wrote you can restore the phones original soft and then you'll get back the warrantee. :)
Asycid 4 months ago
i already rooted my phone but why still i get Operation not permitted ?
takashima7 4 months ago
@takashima7
On original 2.1 ROM it is a little problematic to install this. You must try 2.2 or 2.3 ROMs.
Asycid 4 months ago
TNX!!! by the way those who have operation not permitted your phone is probably not rooted.
evolution0sport 4 months ago
Operation not permitted help
20kenshe 4 months ago
very nice vid ! good job
donzaxspeed 5 months ago
"operation not permitted"
PLAYEREEGAE 5 months ago
when i type in su it says permission denied! PLEASE ANSWER
The1Milan1 5 months ago
The Music is crap!^^
HMSGamer 5 months ago
can u elp me,in emulator it says -operation not pemitted
dancingLukenda 5 months ago
thanks!
OpravduMoucha 5 months ago
I there a way to make total system backup? So there is no room for mistakes, like bricking the phone?
VladKiller006 5 months ago
@VladKiller006
You can't really brick your phone until you unlock the bootloader, but backup will be good, if you can't boot it, and don't want to lose all contacts/sms/etc.
So, just get in Xrecovery/CWM and do a backup first.
Asycid 5 months ago
Comment removed
Waazzaaapy 5 months ago
@gtasanandreas162
Sometimes, yes. Maybe it's related to the fact I'm playing on drums and guitar, and I don't care which finger I'm using :D
Asycid 5 months ago
thanks man..works great
98starzkid 5 months ago
Erm... my thingy says failed to System/lib/modules not found :( What do i do?!
ZeldaSteinVideos95 5 months ago
it works perfect, thanks
TheViktor1998 6 months ago
does it work on a stock rom that is rooted??
xukaiteo 6 months ago
it says operation not permitted. o.o do I have to do something first or sumthin?
dudesters14 6 months ago
Do you need help rooting your Xperia X8?? Then have a look at my channel, there are plenty of X8 videos! Even on how to install android 2.2!
TechNewsWeeklyMMXI 6 months ago
i have rooted my phone successfully
when i open terminal emulator and write as you show in video
it says permission denied
help me....what is going wrong??
thnx
sorry for bad english
Mrshubhamtyagi 6 months ago
@acysid thank god cause i have rooted my xperia x8 thanks
wilbso1234 6 months ago
iv rooted my phone and it works thank you
wilbso1234 6 months ago
Comment removed
wilbso1234 6 months ago
do i need to root my phone or can i just go for it and save myself time and trouble plz reply thanks
wilbso1234 6 months ago
@wilbso1234
Yes, you have to root your phone
Asycid 6 months ago
@Asycid does the dual touch work on games??
bareXis 5 months ago
@bareXis ya..it support games
98starzkid 5 months ago
Do this work for games too?
Killa384 6 months ago
@Killa384
Sure. It works with every app/ game that supports dual-touch.
Asycid 6 months ago
@Asycid Awesome =) I get my X8 Tommorow. Im going to install this =)
Killa384 6 months ago
@Killa384
Before you get into thinsg, please read some more! Not every X8s have this feature! So don't be sad if you accidently get a Synaptics-chipped X8! :)
Asycid 6 months ago
@Asycid ok =) thx for helping
Killa384 6 months ago
Helló ! Nincs véletlenül Magyar leírásod sokat segítene?
Jó a videó!
tbence997 6 months ago
@tbence997
Másold be a /system/lib/modules/ mappába a letöltött filet (ax8mt.ko) és írd be ezt Terminal emulatorba. Fontos a kis- és nagybetűk közötti különbség!:
su
insmod /system/lib/modules/ax8mt.ko
Ezután ha működik, akkor írd be ezt (insmod /system/lib/modules/ax8mt.ko) a /system/etc/hw_config.sh fileba egy új sorba. Fontos, hogy új sorba! Remélem segítettem :)
Asycid 6 months ago
When i download the file, it doesn't show up in my phone. It only says "No supported file". But when i check in my computer, it is there. Any help?
SiimpleiRayy 6 months ago
haha! i succeed !! XD
SkulLzSouL 6 months ago
does it work on everything...like browse, album, games etc........plz reply soon
thnx
Mrshubhamtyagi 6 months ago
@Mrshubhamtyagi
Yes, of course.
Asycid 6 months ago
does it work on my xperia x8 2.1 update-1......plz reply soon
thnx
sorry for bad english
Mrshubhamtyagi 6 months ago
@Mrshubhamtyagi
If your phone has Cypress chip, the yes, it will work. Or if not ,then read XDA forums a little (there are known problems with stock 2.1 ROM)
Asycid 6 months ago
It's that all??
ajakhunny93 6 months ago
Can I do this to my Xperia X10i with 2.3.3 rooted? This dualtouch is better than the pinch-to-zoom I already have. Please tell me! Thanks!
DotArtistas 6 months ago
@DotArtistas
Bad news: no you can't. X10s are delivered with synaptics chip like some x8s.
Asycid 6 months ago
@Asycid Is there any other solution for me? I mean any other package or something that improves the pinch-to-zoom to dualtouch or replace the thing with a proper multitouch? Cause pinch-to-zoom sucks. Thanks again! Subscribed already.
DotArtistas 6 months ago
@DotArtistas
To be honest, I haven't got an idea. See XDA forums X10 section. I'm sure there are a lot of clever things posted ;)
Asycid 6 months ago
@geonabro2
Then you just have to write it to a new line.
Asycid 6 months ago
Thank youu !!! MASTERR I LOVE YOUUUUUU <3333
mathaus96FS 6 months ago
THANKS A LOT MAAAAAAAAAAAAAAAAAAAAAAN!!!!!!!!!!!!!!!!!!!!!!!!! I will subscribe you
3013gamesGR 7 months ago
I have miniCM 2.2.1 rc1. It already has a built in fake dual touch. Do I have to remove it somehow to get cypress? If I have to remove it, can you teach me how o.o pleease :)
dudesters14 7 months ago
@dudesters14
If Fake Dual Touch is working for you, the this module won't. Sorry, but you have Synaptics chip, not Cypress.
Asycid 6 months ago
hey man! ive already copied the ax8mt.ko to system/lib/modules, but when i type the insmod command my phone reboots! :( do u know why is this happening? :( pleasee help me! thanks in advance.
kimistarex 7 months ago
is it possible to install with hakdroid android 2.3.4
theunknownnerfer2010 7 months ago
Hello, I saw Beyomo11's comment, and I think i have same problem, it doesn't wokr for me, phone rooted, running MiniCM6, all files and all lines in their place, but no dual-touch
andriux10 7 months ago
Works great !!! Thank you !!!!
cnx74 7 months ago
PLEASE !!!!!!! CAN YOU MAKE A COMPLETE TUTORIAL : STEP BY STEP . I DON'T KNOW ANYTHING ABOUT HOW TO DO IT ; I DON't UNDERSTAND ANYTHING ( LIKE BACKUP, xRECOVERY,etc) I WOULD BE VERRY HAPPY ;) PLEASE HELP
ibride95 7 months ago
after restart my x8 it goes back to original(without multi touch!!) :(
4038alex 7 months ago
@4038alex
See Video Description...
Asycid 6 months ago
I hv rooted x8 2.1.1, its it able to get dual toutch on this with ur method? i type in su thn skips to the other line thn i type in the thing wher is file is n i get permission denied even if i type su
xSnakeOo 7 months ago
how to make sure we can buy new X8 with cypress digitizer???? :(
seghi88 7 months ago
@seghi88
We can't know for sure. Pure luck. But the Black X8s are more often have Cypress chip (maybe like 7 out of 10, Whites like 1 or 2 out of 20)
Asycid 6 months ago
when i type insmod /sdcard.../ax8mt.ko my phone restart! why? , ty
atamerik9 7 months ago
will it work on big x10??
haRajuku003 7 months ago
@haRajuku003
No, It won't work. Only X8's has got this type of Digitizer chip (beside of the Synaptics of course)
Asycid 6 months ago
is it free?
georgesuperboy1 7 months ago
@georgesuperboy1
Yes, of course it's free. Every module/ROMs are free for Android.
Asycid 6 months ago
@asycid
ok, i'll check 'em out on xda-developers' forums, anyway thanks for your answer :D
sapaajabolehhh 7 months ago
when i type it, and klick enter it said: (operation not permitted) what now??? :(
bannerbomb1 7 months ago
@bannerbomb1
Then the su command haven't worked for you. BTW you have to write everithing with small letters, so its su, not SU or Su or sU. :D
Asycid 7 months ago
is this method can i use to my x8 default eclair??
sapaajabolehhh 7 months ago
@sapaajabolehhh
In theoretically yes, you can, if your phone is rooted. For some people it doesn't work with the stock 2.1 ROM, and I don't know why. Check XDA-developers' forums to solve the problem, and use the search button! :)
Asycid 7 months ago
sorry for being stupid but I just want to make sure if I install it to hw_config.sh will the bugs be fixed? is there any hazardous consequence if I install it to hw_config.sh when I'm having the two bugs when I loading it to the terminal? I'm using MiniCM6-1.0.1 Rom. thanks!
boyemo11 7 months ago
@boyemo11
All bugs will disappear. There is only one thing you have to care: insert the "insmod... etc" command to an empty line in hw_config.sh. If you don't, the module will not work. There's no other consequencies, so try it out! :)
Asycid 7 months ago
@Asycid I reinstalled to froyobread V012 like yours and it works good. thanks! and thanks AnDyx!! hehe
boyemo11 7 months ago
it works, thanks
RumBG 8 months ago
Who Is The Name Of Your Room???
Is Very stable ...
NANONANONIN 8 months ago
@NANONANONIN
I use FroyoBread v012 from doixanh. I'm not using the v016 because I think (seriously, I don't know for sure) it uses more memory for the system and leave less to applications.
Asycid 8 months ago
I don't want to make multitouch running on startup (haven't changed my hw_config.sh) because the screen shuts down after a while as if I weren't touching it at all!
Can I create a *.sh file with these commands (su and insmod...) so that I can run it everytime I need to enable multitouch instead of writing them in the terminal?
I created and executed (with root explorer) a *.sh file with these exact lines but it didn't work. What did I do wrong? Should I write it differently in the *.sh file?
kostass123 8 months ago
@kostass123
That is why I wrote in the description:
If you don't write the insmod command in hw_config.sh, then you can't load it at boot, and the bugs are remains (the "Unresponsive Touch Screen at calls" and the "Screen Turning Off" problem! If the module loads when the phone is booting up, then there aren't any bug, and yes the "screen off" problem will disappear too in that case... So just try it. If it won't work for you, then simply delete the line that you write in your hw_config.sh :)
Asycid 8 months ago
Everybody must read the video description for further informations!
Thank you.
Asycid 8 months ago