@skycollection Nice work as usual skycollection. Hopefully I will post a video of my motor this week. It was running at 42,000 rpm last night and may run faster with adjustment. Similar rotor to yours but with bearings, different type drive coil and no pickup coils yet.
FOR THE MOMENT I CAN NOT DISCLOSE THE DATA INPUT AND OUTPUT WATTS BECAUSE I'M CHANGING THE PICKUP COILS, AND ALL THE INFORMATION IS CHANCHING TOO....! THIS MOTOR IS ONLY "AN EXPERIMENTAL MOTOR-GENERATOR" AND IS NOT FINISHED YET.
You will never get correct answer for this because it would proof that this is not experiment but nonsense!!!
How can he experiment with new kinds of motor-generator-fuckknowswhat-device and say that he doesn't have this results "at the moment"??? What results has he got then???
Answer is more then simple - he has not a clue about electricity and physics in general like many other geniuses on youtube!!!
And as person which has studied electricity for 9 years I know what I'm talking about!!
@tuf83 I am not studied electronics, i am an ECONOMYST...! IN A FEW DAYS i will finish the motor and i will present the results of the generator. thanks for watching.
@tuf83 FOR THE MOMENT I CAN NOT DISCLOSE THE DATA INPUT AND OUTPUT WATTS BECAUSE I'M CHANGING THE PICKUP COILS, AND ALL THE INFORMATION IS CHANCHING TOO....! THIS MOTOR IS ONLY "AN EXPERIMENTAL MOTOR-GENERATOR" AND IS NOT FINISHED YET. THE DATA THAT I SEND YOU IS NOT THE FINAL INFORMATION.
@tuf83 why are you so angry? obviously skycollection found interest in this device and decided to test it for himself. He's not selling you anything, so why then are you mad? The Rodin coil has already been tested by many companies and its efficiency and effectiveness are all regarded as revolutionary. Let this man work and we'll truly know the capabilities, because through him we'll see what a large corp pontentially wouldn't show us.
@larryseyer FOR THE MOMENT I CAN NOT DISCLOSE THE DATA INPUT AND OUTPUT WATTS BECAUSE I'M CHANGING THE PICKUP COILS, AND ALL THE INFORMATION IS CHANCHING TOO....! THIS MOTOR IS ONLY "AN EXPERIMENTAL MOTOR-GENERATOR" AND IS NOT FINISHED YET.
can you compact this configuration down into an RC car chasis and make the rotor into the rear axle? just sayin bro, make a scalable working prototype and then were talkin.
@jackscholze Thanks Jack, this is my PROTOTYPE for the new generator, i will place 10 pickup coils around the twin rotors in order to produce more electricity. thanks fopr watching.
@Magankan No because two compressed starship coils reduce the input voltage of the motor, the resistance of one coil is only 2.5 ohms, two coils is 5.0 ohms...! this generate that the motor works with improved efficiency and btoth coils works synchronized and this helps the rotation of both rotors, is an interesting machinne...! thanks for watching.
Hi skycollection your videos are always very good and your design of coil also very impressive , would you be willing to give us an idea of the efficiency of your motor ,you were showing 27vdc ,is the current also as impressive? .
i understand if you wish to keep such things to yourself .
What is inside the rotor ??/ Magnets ??? It is covered with copper ... we cannot see the internal parts ... what is inside it ???
XoFFoX777 6 days ago
@XoFFoX777 TWO bigs neodymium magnets...! thanks for watching.
skycollection 6 days ago
How heavy is the rotor assembly ??? How much mass are you moving ??? at 28,000 rpm's ???
XoFFoX777 6 days ago
super nice build, nice engineering even if you aren't an engineer. 5 *'s
variablestatus 1 month ago
@skycollection Nice work as usual skycollection. Hopefully I will post a video of my motor this week. It was running at 42,000 rpm last night and may run faster with adjustment. Similar rotor to yours but with bearings, different type drive coil and no pickup coils yet.
mnsman1 3 months ago
FOR THE MOMENT I CAN NOT DISCLOSE THE DATA INPUT AND OUTPUT WATTS BECAUSE I'M CHANGING THE PICKUP COILS, AND ALL THE INFORMATION IS CHANCHING TOO....! THIS MOTOR IS ONLY "AN EXPERIMENTAL MOTOR-GENERATOR" AND IS NOT FINISHED YET.
skycollection 3 months ago
@skycollection This is great! Listen to that hum!
LeonidEmerze 3 months ago
If the input amperage is .6 amps, what is the input voltage?
If the voltage output is 24 volts, what is the output amps?
What is the 'load' on the output? What is it's resistance (if any)
How many watts are used to turn the cranks?
How many watts are the coils producing?
larryseyer 3 months ago
@larryseyer for the moment i have no this results but i will anwser your questions in a few days. You can write me to: skycollection@hotmail.com.
thanks for watching.
skycollection 3 months ago
You will never get correct answer for this because it would proof that this is not experiment but nonsense!!!
How can he experiment with new kinds of motor-generator-fuckknowswhat-device and say that he doesn't have this results "at the moment"??? What results has he got then???
Answer is more then simple - he has not a clue about electricity and physics in general like many other geniuses on youtube!!!
And as person which has studied electricity for 9 years I know what I'm talking about!!
tuf83 3 months ago 2
@tuf83 I am not studied electronics, i am an ECONOMYST...! IN A FEW DAYS i will finish the motor and i will present the results of the generator. thanks for watching.
skycollection 3 months ago
@tuf83 go dry up
mcorrade 3 months ago
@tuf83 FOR THE MOMENT I CAN NOT DISCLOSE THE DATA INPUT AND OUTPUT WATTS BECAUSE I'M CHANGING THE PICKUP COILS, AND ALL THE INFORMATION IS CHANCHING TOO....! THIS MOTOR IS ONLY "AN EXPERIMENTAL MOTOR-GENERATOR" AND IS NOT FINISHED YET. THE DATA THAT I SEND YOU IS NOT THE FINAL INFORMATION.
skycollection 3 months ago
@tuf83 why are you so angry? obviously skycollection found interest in this device and decided to test it for himself. He's not selling you anything, so why then are you mad? The Rodin coil has already been tested by many companies and its efficiency and effectiveness are all regarded as revolutionary. Let this man work and we'll truly know the capabilities, because through him we'll see what a large corp pontentially wouldn't show us.
LeonidEmerze 3 months ago
@larryseyer FOR THE MOMENT I CAN NOT DISCLOSE THE DATA INPUT AND OUTPUT WATTS BECAUSE I'M CHANGING THE PICKUP COILS, AND ALL THE INFORMATION IS CHANCHING TOO....! THIS MOTOR IS ONLY "AN EXPERIMENTAL MOTOR-GENERATOR" AND IS NOT FINISHED YET.
skycollection 3 months ago
Comment removed
larryseyer 3 months ago
can you compact this configuration down into an RC car chasis and make the rotor into the rear axle? just sayin bro, make a scalable working prototype and then were talkin.
jetorbit206 3 months ago
beautiful work and experiments you are doing Jorge. Please keep up all the wonderful building and experiments. aloha
jackscholze 3 months ago
@jackscholze Thanks Jack, this is my PROTOTYPE for the new generator, i will place 10 pickup coils around the twin rotors in order to produce more electricity. thanks fopr watching.
skycollection 3 months ago
Can you not turn both rotors with 1 coil?
Magankan 3 months ago
@Magankan No because two compressed starship coils reduce the input voltage of the motor, the resistance of one coil is only 2.5 ohms, two coils is 5.0 ohms...! this generate that the motor works with improved efficiency and btoth coils works synchronized and this helps the rotation of both rotors, is an interesting machinne...! thanks for watching.
skycollection 3 months ago
comparando la potencia que consume con la potencia que genera , que porcentaje de eficiencia tiene?
kuadroplo 3 months ago
Very nice excellent build I am impressed with balance of the twin rotors the coil in the center acting as a duel power source yes very well done
DrSaminstine 3 months ago
FEEL FREE TO BUY WHATEVER YOU WANT
khoham 3 months ago
impressive
awakaraga 3 months ago
Excellent!
You could try lengthening the the rotors and adding more p/up coils?
thewonn 3 months ago
@thewonn yes, this is the idea, for the moment this is a prototype..! thanks for watching.
skycollection 3 months ago
Hi skycollection your videos are always very good and your design of coil also very impressive , would you be willing to give us an idea of the efficiency of your motor ,you were showing 27vdc ,is the current also as impressive? .
i understand if you wish to keep such things to yourself .
muzzz33 3 months ago
excelente trabajo te felicito amigo, sigue asì deberìas sacar un e-bbok pdf de tus projectos e-book skycollection
MrGeraldino250 3 months ago