Added: 2 years ago
From: Jeeperrandy
Views: 2,051
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (37)

Sign In or Sign Up now to post a comment!
  • Comment removed

  • What kind of Cutting stand is that?

  • I take all the edges off of the beach mats in order to prevent any damage. I doubt that it will damage the sword (outside of staples there) but I beleive that the drain is also better. It takes a bit of time and effort. Thanks for the video.

  • @suezbad Good tip. I'll have to try that.

  • what is your apinion on softwood trees if i use a sword with no polish

  • @orangebrock Personally, I woulodn't recommend wood at all. even soft woods are unforgiving. you could end up with a broken, bent or badly scuffed sword.

  • @Jeeperrandy bamboo?

  • @orangebrock Green bamboo is a traditional tameshigiri target and it grows in lots of places ( except where I live in the Great White North ). Dried bamboo it quite hard and could chip or bend your blade

  • As for newspaper, in fact (I don't know if you tried?), you should make up a roll that is approximately the same diameter as one or two tatami mats. My own observations are that newspaper, being compressed together more than tatami, is in fact more challenging for the blade and the cutter. Results will be better if you soak separate batches of paper and then roll them together, though...

    Hint : horizontal cuts are easier than downward ones.

    Tell me when you've tried!

  • Great instructional vid, keep up the good work keeping the traditions of swords and sword fighting alive.

  • another thing about those beach mats, some of the little fizzy borders are stapled to them so ya want to remove those to prevent any sorta damage to your blade.

  • hey how long do you soak the Beach Mat in water for???

    thanks for posting. ^_^

  • @ryryryu1 I used to think the beach mats didn't need to soak as long as real tatami, but after talking to one of the premier cutters on youtube (Revan9729) I found that they actually should soak longer. Not less than 24 hours and ideally 2 days .

  • @Jeeperrandy Thanks, thats what i needed to know...^_^

    take care,

    ryan

  • @ryryryu1 I only soak mine for 12 hours. I do it before I go to bed, then cut them in the morning. Let them soak for 11-14 hours, then let them dry for an hour. This works fine. I cant see them being able to soak up any more water, so any more than 16 hours is unnecessary...in my opinion of course. I dont have actual physical evidence.

  • @LotusDragon09 thank you... ^_^

  • 3:55 - epic!

  • great vid im gonna look into the beach mats

  • Around here they sell for about a dollar each, but they don't hit the stores until almost summer. I buy a box of 45 at a time. Many people I know use these for tameshigiri often, including revan9729 who is a well known youtube cutter.

  • just got back from the dollar store and they said they will probly have them in next month, but now i gotta make a stand for them lol

  • Nice video, I personally like empty soda bottles for test cutting, if your sword isn't perfectly sharp and your technique flawless, it'll turn the bottle into a ballistic nightmare.

  • if you soak your newpaper rolls for about 2-10 seconds it should makeit good for cutting.

  • Very informative, Randy. Thank you for sharing this. I learned quite a bit. :D

  • When i soak my mats in water i add quite a bit of vedgetable cooking oil too.

  • wow i want to try it

  • P.S. nice video

  • The great thing about the beach mats (as well as tatami) is that they are biodegradable. Out front of my place is a lot, that is untamed (over grown brush). I just throw my mats there when I'm finished cutting. I even use them in the bottom of my pots before I put dirt in them for plating. I even put a couple in the middle for plants to attach their roots to them. Recyclable and biodegradable is key!!! Keep mother earth clean!!!

  • P.S great video Randy!!!

  • Funny you should say that. I had a bit in there about biodegradability of the mats and cardboard/paper as opposed to the pool noodle, and I cut it out , along with some other rambling , to keep the vid under 10 minutes.

  • hi randy um i watch your vids and i wanted to know how i would get a tatami stand? plz reply thanks.

  • make one yourself, take a 4x4 cut to whatever height you want, attach 4 pieces of 2x4 along the 4 sides of the 4x4 at one end to make a base, drill a 1 inch diameter hole in the top of the 4x4 a few inches deep, take a piece of 1 inch diameter dowel about 5 inches longer than the hole in the 4x4 is deep, sharpen one end of the dowel and glue the dull end into the 4x4. hope this was helpful.

  • making a tatami stand would be cheaper then buying one

  • Nice explanatory video Randy.

  • I've heard of some people attaching their cut pool noodle chunks to nets to make a trap kind of thing for fishing. I don't know exactly how it works, but that's one way you could recycle them.

  • great vid randy

  • Great video, Randy! I like the diversity you go through. The wind wasn't going to cooperate with the newspaper, eh? Peace.

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more