your gunna need a terry filter if your going to use obit's or nst's the minimal insulation inside the cores can't handle the voltage spikes from the primary resonant circuit. if you don't get a terry filter use mot's and submerge in canola oil or the like. Good Luck more info @ 4hv(dot)org
now build a seperated polarity type,or devided tank water hho elecroisis type
fuel cell where all the positive electrode fins are on one side of the divider, and negitive on the other side of the cell. The divider go's from the top of the cell,to about 1&1/2 inch-2 inches below the level of the the electrodes, and the tops sealed.
Then port the fuel to the burner and once running reduce the fuel,and use the gas, made by the cell.power it off the tesla coil.
Oh, okay... that makes sense. Nice coil! You will get bigger, beafier sparks if you add a large torroid on top to add some capacitance to the secondary tuned circuit.
thanks for the ideas probably going to tear it all down and tighten the primary and add a vacuum multi gap might even try spinning a torrid ill post another video as soon as it up and running
your gunna need a terry filter if your going to use obit's or nst's the minimal insulation inside the cores can't handle the voltage spikes from the primary resonant circuit. if you don't get a terry filter use mot's and submerge in canola oil or the like. Good Luck more info @ 4hv(dot)org
corester123 1 year ago
now build a seperated polarity type,or devided tank water hho elecroisis type
fuel cell where all the positive electrode fins are on one side of the divider, and negitive on the other side of the cell. The divider go's from the top of the cell,to about 1&1/2 inch-2 inches below the level of the the electrodes, and the tops sealed.
Then port the fuel to the burner and once running reduce the fuel,and use the gas, made by the cell.power it off the tesla coil.
TheBattleWagon 1 year ago
YOU NEED A MMC for that,it will make the sparks biger
deanoriordan07 2 years ago
thanks but its broken now : ( and my obit died
hl2forever 2 years ago
oo ok, you must make a new one or a bigger one.
deanoriordan07 2 years ago
i have no money : ( lol... but id love to make a big one
hl2forever 2 years ago
I guess you like this sort of stuff, Hi-voltage stuff
Are you a member of any geek groups.
I am a member of a Geek Group i can give you the link if you want.You might like it.
deanoriordan07 2 years ago
do you use MMC?
TCDIL95 3 years ago
Why do you call it "mini oil burner tesla daytime" WHAT THE HECK DOES THAT MEAN????
xrayrep 3 years ago
because i originally made two vids one in daytime one at night
hl2forever 3 years ago
Oh, okay... that makes sense. Nice coil! You will get bigger, beafier sparks if you add a large torroid on top to add some capacitance to the secondary tuned circuit.
xrayrep 3 years ago
I dont see much oil burning
bis124 3 years ago
It's the type of transformer he's using, dummy.
integralfrom0to1 2 years ago
Or just a multiple gap spark gap. Should have a bigger top load too. But that is enough of the 2 cents. Looks really neat. Have fun experimenting.
cfavreau 3 years ago
Nice coil. Make a blown spark gap for better performance. I get 2 inch longer arcs when i have my vacuum to suck the stuff away.
triggerhappy77707 3 years ago
thanks for the ideas probably going to tear it all down and tighten the primary and add a vacuum multi gap might even try spinning a torrid ill post another video as soon as it up and running
hl2forever 3 years ago