I like these videos because they are good diy without using a lot of expensive equipment. Obviously not meant to restore a classic car but would help freshen up a daily driver that wouldn't justify a $3000 body job.
i have a question. i have a 20 year old toyota with large holes in the roker panels from rust. since this is a structural part of the car (for jacking) i cannot fill it with auto body putty. what should i do.
its a bodyshop job, they'd have to cut the rusted piece out, weld a new piece in, sand it down to fit and spray it to blend it in, its the only real way to get rid of cancerous rust
im sure if you got the same thickness metal or a little thicker and welded it in properly, aslong as the welds are stong, it should hold fine, but if i were you i'd send a quick email to a bodyshop and just ask there opinion aswell, it would be fine in my opinion though.
the rocker is not just structure for jacking but also structure or the entire vehicle.. the rocker will need to be cut out "at proper cut points" and a new rocker properly weldied back in. in must be strong but not stronger then ment to be from factory
Its ok to make rockers stronger. Not frame rails, but rockers are OK. Cars are made with whats called impact zones, but the passenger compartment is not made to absorb energy. Well kind of it is, like windshield posts from a front end wreck, but all in all, that part of the car, the passenger compartment is not made to give way. Its a gray area. If a B pillar is right next to a persons shoulder, is it better to have it give so less energy is passed into the compartment, or better ridged.
Wow, look at that stache'.
SignalStudios 3 days ago
what a joke get some real people to do a video on auto body
jimba2000 5 days ago
we are asked to mortgage the house before we start
rpp644 2 weeks ago
these videos looks like they are from the 80s
tuning944 1 month ago
Do i also need a beautiful mullet?
TheOutspokenman1 1 month ago
lol @ 8:05 he looks him deep in the eyes and declares "we're basically ready to start grinding"
crashdiet69 1 month ago
want a mustache ride?
crashdiet69 1 month ago
mmh ich bin eine gummi puppe
DelisaMariatj106 1 month ago
holy 1990!! good info though~
pranadragon 9 months ago
dude has a sweet rack
wakeoftheflood2 11 months ago
@wakeoftheflood2 "dude has a sweet rack" why would you say ANYTHING like that? you get the homo of the year award.
Crowstew 5 months ago in playlist Repair Rust Spot
scott pussey
hp11208 11 months ago
Hacks.... terrible hacks.
KrisKustomPaint 1 year ago
Billy Ray Cyrus FTW!!!!
Zakkwilder1982 1 year ago
mullet....check, fuckin bitchin mustache....check.....awesomeness....check....begin
kamchuka 1 year ago
mullet!!
95steveexplorer 1 year ago
8:06
FistsOfTime 1 year ago
25 seconds in and this video is already amazing. i hope this video was shot this year.
FistsOfTime 1 year ago
@FistsOfTime def shot this year hahaha
wakeoftheflood2 11 months ago
Mullets rule!!!!!!!!!!!!
vmodrak1 1 year ago
anybody actually going to follow things get a better mask your lungs will last longer
tomhotrod87 2 years ago 2
the cheapo Harbor Freight respirator is $20 and a thousand times better than dust masks - breathes easy, doesn't fog the goggles and
has replaceable filters. When I started using this I quit blowing rusty mud buggars after grinding.
MadSmokerBBQ 1 year ago
also when you work outside?
Killiiminati 1 year ago
yes even outside i have a Friend in need of a double lung transplant, and i dont think you want that. its better to be safe then dead
tomhotrod87 1 year ago
lol from 0:20 to 0:41, it looks like there is a real pistol being pointed at his head
obcaraudio 2 years ago 28
hahaha
evanellakb 2 years ago
oh that's hilarious!
MadSmokerBBQ 1 year ago
wow, that looks nothing like "a real pistol" why are you such a dumb bitch
bbokainen 1 year ago
@obcaraudio Its a Timing Gun lmao
dyer01905 1 year ago
Obcaraudio, that's a timing light. You must live at The Home For The Easily Amused. To each his own.
AppleSouffle 7 months ago
i like his hair
jaggajatt08 2 years ago 14
I like these videos because they are good diy without using a lot of expensive equipment. Obviously not meant to restore a classic car but would help freshen up a daily driver that wouldn't justify a $3000 body job.
drjim86 2 years ago
his voice....its just so flat and borrrrrrrring... really good info though makes me want to but a junker car even more
funnyskater3 2 years ago
i have a question. i have a 20 year old toyota with large holes in the roker panels from rust. since this is a structural part of the car (for jacking) i cannot fill it with auto body putty. what should i do.
TheBlueToyota 2 years ago
its a bodyshop job, they'd have to cut the rusted piece out, weld a new piece in, sand it down to fit and spray it to blend it in, its the only real way to get rid of cancerous rust
bender2o 2 years ago
is it possible if i just did it without reinforcing the roker panel because i think im good enough to do this.
TheBlueToyota 2 years ago
im sure if you got the same thickness metal or a little thicker and welded it in properly, aslong as the welds are stong, it should hold fine, but if i were you i'd send a quick email to a bodyshop and just ask there opinion aswell, it would be fine in my opinion though.
bender2o 2 years ago
thank you. im 13 and love to fix things and this is a 20 year old car so i just want to use it as a pratice car so its ok if i fuck up.
TheBlueToyota 2 years ago 2
the rocker is not just structure for jacking but also structure or the entire vehicle.. the rocker will need to be cut out "at proper cut points" and a new rocker properly weldied back in. in must be strong but not stronger then ment to be from factory
50jofa 2 years ago
Its ok to make rockers stronger. Not frame rails, but rockers are OK. Cars are made with whats called impact zones, but the passenger compartment is not made to absorb energy. Well kind of it is, like windshield posts from a front end wreck, but all in all, that part of the car, the passenger compartment is not made to give way. Its a gray area. If a B pillar is right next to a persons shoulder, is it better to have it give so less energy is passed into the compartment, or better ridged.
YouSpamTard 2 years ago
just what I need
interbug 3 years ago
thank you for uploading this, 5 stars very professional.
thebibleisfiction 3 years ago
this is a great video.
stosstrup666 3 years ago
Thanks for posting! Awesome!
POPPASHANGO 3 years ago