HTC Incredible S Screen Take Apart Repair Guide

[Mr9000and1]

can you guys make a video about repairing the wifi?

[RepairsUniverse]

@Mr9000and1 I would depend on the issue with the WiFi. Has the phone been water damaged or have any history - such as previous repairs, major drops, liquid damage, etc.?

[Mr9000and1]

@RepairsUniverse never dropped and never in the water. everything works exept the internet. When i turn the wifi on it says unable to find to network, even tho theres like 16 around me. Its not the OS issue in the phone because i already checked so my conclusion is that the wifi chip burnt out. now the question is how do i fix it and where do i get a wifi chip for the phone

[RepairsUniverse]

@Mr9000and1 The WiFi will be part of the motherboard. I would suggest taking it to a repair shop to get the issue fully diagnosed.

[sergeykirsanov1234]

Очень полезная информация! Но сам не рискну так делать)

[flipping33]

can you do a video for me on how to fix the charging port on the phone. mine is not charging and i would like to know how i can fix it.

[RepairsUniverse]

@flipping33 Really not too much we can show. It is located around 1:40 in the video. I would suggest disassembling and checking for damage or loose cables in that area.

[rotundsaftig]

Can you tell me please where I can get this to Mylars at 5:12 or same looking insulating foil?

[RepairsUniverse]

@rotundsaftig The foam can be found from many repair shops who use model specific adhesive. This is normally quite expensive (for adhesive). This is why we suggest the adhesive strips available at RepairsUniverse (dot) com. They can be cut to fit and make a great bond.

[rotundsaftig]

@RepairsUniverse I meen the two strips you can see always at 3:03 on the right side. I think this must be a polyester foil or somethink else, not a double side adhesive strip for digitizer repair.

[RepairsUniverse]

@rotundsaftig Ah I understand. Yes this is a metal mylar foil material. I am not sure where you can get these. I do know that our housing replacements have them pre attached. They will not effect functionality however if they are ripped or torn.

[shivaagarwal007]

Some part of my touch screen on this phone are not working. What should i do? CAn it be repaired or it needs to get changed?

[RepairsUniverse]

@shivaagarwal007 Has the device been exposed to water or been dropped? The flex cable from the touch screen may have been dislodged or the digitizer may have been damaged. I would suggest opening it up and checking the flex cable to the motherboard connection. If that seems correct I would suggest replacing the touch screen digitizer. These are available at RepairsUniverse (dot) com.

[BoneBeast]

Do you guys ship to sweden?

[RepairsUniverse]

@BoneBeast Yes we do. Shipping to Sweden starts at $7.99.

[MrJFJ93]

But is it then possible to use the old LCD screen with a new glass since it is only the glass that is damaged? or do i have to buy a new LCD screen aswell?

[MrJFJ93]

and if it is possible, how do i put together the new glass module and the old LCD screen? with glue? if so what kind? :) thanks btw

[RepairsUniverse]

@MrJFJ93 Ah, I understand now. Yes, of course. The screens are adhered together, but you can separate them fairly easily. Just take your time and don't force anything. Once you are ready to replace the touch screen, you will need to use adhesive. We suggest the adhesive available at RepairsUniverse (dot) com, this is the best adhesive we have found and have used it for many years without issues. Check out our "Touch Screen Assembly Guide" in our channel for more info about adhesive.

[MrJFJ93]

What if i only want to replace the broken glass module? do i have to pull out the LCD aswell?

[RepairsUniverse]

@MrJFJ93 Yes, the LCD screen is adhered to the outer touch screen digitizer.