@marklydarkly4545 mines a 141inch....do not use rail extensions if you like to jump....not only did i break the extensions, it broke the rails. you got pipes?
if it's a 96 it's a 597 not a 580 and the stock jets are 260's i had dg pipes on mine and put the jets to 290's, then i put on air filters and changed the jets to 320's and 1 gram lighter weights in the clutch, it maxed out at 123mph and ran at 10,700 rpm. never blew up until i sunk it.
dude thats spinning hard...u will blow you're crank.....and what other mods do u have?....123mph.....bullshit...unless its a drag sled....its not possible with that motor....I race sleds and build engines....
@hammerud yes serious man. top of the line EPI clutch kit cheater heads, ported'n'polished, welded crank triple DG pipes and geared for top end 20:35 gears
@triplepipes if you were pulling that many rpms on a xlt block...just wow dude, i hope your crank shaft was welded. if it was your a very lucky man.one slip of the dowels and BOOM your entire engine is screwed. my xlt with .040 kimpex pistons and mountain gears tops out at 90-95mph depending on how well the trail is packed. im buying psi pipes and deleting my airbox soon. changing up to some faster gears. tinker with clutch when thats all done
the best way to sink your carbs is to take the air box off, then to put either tooth picks or drill bits that are the same size. put one under each slide of the carb. then slowly move the throtle and see which one moves first. that is how i sink my carbs and it runs really strong.
he did not i think he changed the jets to 3 sizes bigger and last week he had a problem with his oil hoses and the engine siezed :( it sucked but we learned some things. i have a 95 and it is running nice i hit over a hundred up at jim creek. i need to do acouple things to it but yeah xlt's are awesome
Why do you call it a snowmachine? It says snowMOBILE on the manual!
bvgpsupt 2 years ago
@bvgpsupt its a sled in idaho , lol
zombiesack 1 year ago
i have the same sled mines a 94 is that a 136inch
marklydarkly4545 2 years ago
@marklydarkly4545 mines a 141inch....do not use rail extensions if you like to jump....not only did i break the extensions, it broke the rails. you got pipes?
oilfield666 2 years ago
Comment removed
shawnyboie 2 years ago
Comment removed
plazzax 3 years ago
if it's a 96 it's a 597 not a 580 and the stock jets are 260's i had dg pipes on mine and put the jets to 290's, then i put on air filters and changed the jets to 320's and 1 gram lighter weights in the clutch, it maxed out at 123mph and ran at 10,700 rpm. never blew up until i sunk it.
triplepipes 3 years ago
Are you any good diagnosing tuning problems by watching a video? I have a 93 580 with pro-5 pipes (3 into 1) and it doesn't run for shit!
Could you help, "Triplepipes"
Thanks.
poopdogsays 2 years ago
@poopdogsays
what video is it? pro-5 pipes eh. put your air screws to 2 turns out and 300 main jets. also if you have triple pipes you should get a clutch kit
triplepipes 1 year ago
dude thats spinning hard...u will blow you're crank.....and what other mods do u have?....123mph.....bullshit...unless its a drag sled....its not possible with that motor....I race sleds and build engines....
hammerud 2 years ago
@hammerud yes serious man. top of the line EPI clutch kit cheater heads, ported'n'polished, welded crank triple DG pipes and geared for top end 20:35 gears
triplepipes 1 year ago
@triplepipes if you were pulling that many rpms on a xlt block...just wow dude, i hope your crank shaft was welded. if it was your a very lucky man.one slip of the dowels and BOOM your entire engine is screwed. my xlt with .040 kimpex pistons and mountain gears tops out at 90-95mph depending on how well the trail is packed. im buying psi pipes and deleting my airbox soon. changing up to some faster gears. tinker with clutch when thats all done
oilfield666 2 years ago
@triplepipes thanks-triple-pipes-i-needed-to-find-out-#s-for-slp-pipes-jet-#s
bigshotxlt21 1 year ago
man i hate trying to sync the carbs on my xlt
SledHeadNE 3 years ago 4
the best way to sink your carbs is to take the air box off, then to put either tooth picks or drill bits that are the same size. put one under each slide of the carb. then slowly move the throtle and see which one moves first. that is how i sink my carbs and it runs really strong.
bikeguy77 2 years ago
@bikeguy77 /-fuck-sake-you-need-a-syncronizer-not-a-fucken-tooth-pick-geeez
bigshotxlt21 1 year ago
@bikeguy77 so when you rejett it what are you doing to the sled cause i wanna put a dg can on my xlt 600
PolarisIndyPower 5 months ago in playlist More videos from stinkalick
@PolarisIndyPower for just a dg can that goes on stock pipe you dont have to rejet
johnathonmelby 1 week ago
Does your buddy want to sell his pipes since he blew the engine? If so drop me a message on youtube. I'm looking for another set
mvvette97 3 years ago
was there much improvement in power?
mvvette97 3 years ago
well not really i was head to head with him on my 95 xlt stock, maybe we did something wrong.
stinkalick 3 years ago
really? that's strange. Did you clutch it also? I just bought a set of SLP triples for my 95 xlt. They clain about 20hp
mvvette97 3 years ago
he did not i think he changed the jets to 3 sizes bigger and last week he had a problem with his oil hoses and the engine siezed :( it sucked but we learned some things. i have a 95 and it is running nice i hit over a hundred up at jim creek. i need to do acouple things to it but yeah xlt's are awesome
stinkalick 3 years ago
So was it an oil pump problem then?
mvvette97 3 years ago
Comment removed
mvvette97 3 years ago
what an awesome sound
furff 3 years ago