i have a walkera 4 as well and recently busted the rotor head, do you know how i can safely separate the ball joints holding everything together in a way so that i can rebuild it with a new head?
I use the esky 4n1. I don't know a lot about these particular blades on this heli. It is not mine. It is identical to mine except for the blades. I make my own high speed blades. I describe the method in a post on one of my other videos. Check it out. (my heli is the green one and the one without a canopy
hi rollintape,another question,before the video begins in the window i read some words,high performance blades,sepped motor 300,u tune up ur heli with this parts???
can i make this too,on my DF4,i want change the batterie too,will build in a lipo.
hi some questions about ur df4,i ask a men in a shop here in germany and he say to me,this heli is not the best,and i say why,he ,the tailmotor is not the best,is it true???
and can u say me what u build in in ur heli the parts??.
Do a search for the (GWS DD tail) It is a CN-12 RXC motor with a ep4530 prop and mounting kit. Also use the longest tail boom possible without hurting the CG.
Awesome! I got the DE 4 for four weeks now and i'm still hovering ;-)
Kapernaum 4 years ago
i have a walkera 4 as well and recently busted the rotor head, do you know how i can safely separate the ball joints holding everything together in a way so that i can rebuild it with a new head?
any help is appreciated
ifhtfir 4 years ago
I do it with a pair of small needlenose pliers and a gentle hand.
broggyr 4 years ago
did you buy this at dealextreme?
legomindstormbuilder 4 years ago
Hey, where they buy Aussie High performance blades
Crazycr35 5 years ago
could i use like 90 FP blades as well ?
where can i buy the DD tail kit in the uk
o0dekker0o 5 years ago
You can use like 90's but not without using a 11.1v lipo and upgrading the 4n1.
rollintape 5 years ago
what 4 n 1 have you upgraded to ?
how are your blades different to FP like 90's ?
o0dekker0o 5 years ago
I use the esky 4n1. I don't know a lot about these particular blades on this heli. It is not mine. It is identical to mine except for the blades. I make my own high speed blades. I describe the method in a post on one of my other videos. Check it out. (my heli is the green one and the one without a canopy
rollintape 5 years ago
ok cool, so you must have a good head speed.
o0dekker0o 5 years ago
How blades do you used ??
Crazycr35 5 years ago
Hey nice flight, the elctronics is stock or modified
Crazycr35 5 years ago
hey would you get the same poreformance if you you use a 7.4 volt 1800mah 10c lipo
onlyemerica734 5 years ago
if i were you i would tie yur arial wire shorter so it can't reach the tail rotor
heliboyno10 5 years ago
hi rollintape,another question,before the video begins in the window i read some words,high performance blades,sepped motor 300,u tune up ur heli with this parts???
can i make this too,on my DF4,i want change the batterie too,will build in a lipo.
sicerely paul.
schnuffellbaer 5 years ago
a good setup is a EM300 main GWS DD tail system on a GWS 13" boom and a 1800mah 12C 7.4 lipo. That should make you happy.
rollintape 5 years ago
hi some questions about ur df4,i ask a men in a shop here in germany and he say to me,this heli is not the best,and i say why,he ,the tailmotor is not the best,is it true???
and can u say me what u build in in ur heli the parts??.
sincerely paul/germany
schnuffellbaer 5 years ago
Do a search for the (GWS DD tail) It is a CN-12 RXC motor with a ep4530 prop and mounting kit. Also use the longest tail boom possible without hurting the CG.
rollintape 5 years ago
Very impressive flight !
I cant't belive this this a DF4 :)
hope you will give us new videos.
Ciolouse 5 years ago