SGP Carbon MacBook Pro Skin

[EvEg173]

Никогда так не обтягивайте,слышите. Перед обтяжкой поверхность нужно обезжирить или пройтись спиртом,а не тряпочкой. И никогда полностью не отклеивайте наклейку/плёнку. Избавляться от пузырей нужно ракелем,а не рукой.

[AdamDrinkall]

My corners keep lifting! Any solution?

[Yonnlopez]

Bubble

[RobTheBang]

ICarbons is a lot better. You don't have that Tear-drop cut-out at the corners.

[AppleRocks458]

That's a beast cover

[MsBoec]

чёрт косорукий!!

[DixieCzech]

I think this sticker makes it look like some cheap laptop with Apple sticker on it..

[MrJasongreen71]

what about the bottom part the part

[cadh11]

stupid way of doing it! use your head, bro!

[URPREY]

@cadh11 what's stupid about doing it the way I did? The material is the same carbon material as the rest of the sticker and you can't tell the difference so please enlighten me, bro.

[iiperento]

@URPREY dude gimve me ur mac! NAO!!

[pthorsteinn]

@URPREY It's not carbon fiber.

[MrDilliption]

how did you fix the corners

[URPREY]

@MrDilliption I used the extra piece of material from the package to cut pieces to cover the corners.

[emceefocus]

@MrDilliption just use a hair dryer on it. actually works

[MoodieDuck]

Will this fit the MacBook Pro 2009 version?

[URPREY]

@MoodieDuck yes they are the same

[Flobbies]

How do you open the enveloppe without tearing everything up? They sent me one too but I don't know how to open the package without ripping it or cutting it. Please reply!

[GatewayXl]

He said He Dig so I Dug em

[nikowhy95]

@URPREY Thanks. But will it fit the 2011 version?

[URPREY]

@nikowhy95 There is no physical difference between the 2010 and 2011 MacBook Pros

[nikowhy95]

@URPREY Will this fit the new MacBook Pro 2010?

[URPREY]

@nikowhy95 Yes, it will

[handsome2302]

Nice video but the Top skin's edges looks ugly. no offense !

[AmbicionEterna]

Is the carbon fiber skin terribly thick? Will the macbook fit inside a standard INCASE sleeve afterwards? Thanks for the review :)

[URPREY]

@AmbicionEterna It's very thin, so I don't imagine it would be an issue but I've never tried it with the INCASE sleeve.

[MrTouchHelping]

LOL its upside down

[Tylaaahh]

@MrTouchHelping No it's not..

[dexa212]

Can you give me free samples? I love the skins that you make a model in this video

[URPREY]

@dexa212 free samples? Unless I specify otherwise, I buy all of the products I review here with my own money.

[blessen]

@dexa212 this has to be one of the dumbest comment/question I've read.

[brokenthorn15]

Corner solution? Heat gun of course. Everyone has one, the way everyone has a Macbook Pro... :'( sniff

[maddoxofficial]

is it easy to remove it after ? xd

[insanejake11]

funny you keep talking while your working to pass time

[insanejake11]

it's like putting a sticker on a lego set....lol

[yangboi88]

you have an airbuble to the right of the mac...hahaha see it?!

[FlipFlopRocker]

Can I have your unused carbon fiber apple? :p



[niooof]

you fixed the corners from the apple :P

[ryankees825]

does it make the macbook over heat



[URPREY]

@ryankees825 no it doesnt

[BoronAlloy]

It does not look, nor feel like carbon fibre! Go look, and feel a real piece of CF, you'll be shocked how much DINOC doesn't imitate the real thing. Two-tone diagonal lines does not equate to being just like carbon fibre. Sadly these skins are cheap & tacky (no adhesive pun intended), which begs the question why? Why whimp out on buying the real McCoy on a $1K item?

[DieNBreatheMMA101]

hey,do they have the skin ''chao chee bye''?please respond,thanks.

[gonzo1709]

Will this work over Speck SeeTrhu satin.....it looks really nice but i dont want to lose the speck protection

[URPREY]

@gonzo1709 I have no idea. I don't have the Speck case for my MBP

[shaz3897]

is it good



[r4nd0m1z3d]

You do know that other skin makers have the exact same design except without the weird corners right?

[muffa08]

haha once i have it imma stick the carbon apple logo on ma itouch ^^

[silvakid]

i see 4

[l4ur0]

The pictures and the video are not the same skin .... in the video you can see the corners of the skin have a little hole but not in the pictures :)

[URPREY]

@l4ur0 it most certainly is the same skin. I used some extra material from the packaging to cover the corners of the skin. Turned out very well.

[skripter888]

@l4ur0

u're right

[vVthinkhardVv]

how did you fix the corners?

and is it still doing its job after a few months?

[vVthinkhardVv]

sorry, just realized you posted this recently... still, how's it holding up?

[URPREY]

@vVthinkhardVv it's been on for a few weeks but it's holding up great with daily usage and sliding it in and out of a laptop sleeve a few times daily

[vVthinkhardVv]

@URPREY thanks for the reply and glad to hear it's going fine.

What's the trick behind the corner fixes?

[URPREY]

@vVthinkhardVv there is a small 3x3 square of material on the packaging. I used that to make corner "patches" to cover the holes. From a foot away you can't tell the difference.

[vVthinkhardVv]

@URPREY Cheers. May get one for myself sometime soon.

[FishDS9]

Great work on this video. I appreciated your comments and the thoroughness of your explanations and the post script at the end with the corner fix.

My only critique is the sound level of your mic and the sfx. I noticed your mic audio was lower than the sfx audio on the vid. I had to adjust my speakers at the start of your commentary and again at the end of the video.

Thanks for posting this Bill!

[URPREY]

@FishDS9 I appreciate the feedback. I probably should have used my normal podcasting mic for the commentary; my current camera doesn't have a separate mic input and sometimes my audio becomes a bit soft. Maybe I'll just buy a new camcorder :-)

[gordyandellen]

Nice stuff Bill,

[ultimo119]

This thing is sweet looking Bill! The combination of that with the 12 South pad must be awesome!

[mlh418]

great!

[Deathinnovember]

Oh man, that looks really cool. I'm impressed. I agree with you, the corners look a little funky, but it's not horrible.

You did a awesome job of explaining the process of installation too.

What a beautiful a skin. I Favorited this video so I can go ahead and purchase this at a later time.

Always enjoy your videos man!

[URPREY]

@Deathinnovember thanks! At the end of the video I show how I fixed the corner issue (I used some extra material from the outside of the envelope to cover the corners). This thing really feels nice on the MBP.