You can go to the drinking-water site or simply take two tubes of stainless tubing and keep an 1 mm distance between the two tubes. I also have schematics for the pulse generator on my website. And, no I haven't made any money from the hydrogen projects I have done. I have spent thousands trying to help others and now several groups throughout the world are running vehicles on hydrogen. I cannot however get many to use it in the US because they want the new camero. It's hard to fight propaganda.
How do you make one... no i don't want to be told some bullshit which i have to pay for thank you, hope that is not offensive to you unless that's what u are trying to do
Hi HydrogenAuto, In a rare high quality television documentary DVD that I have,
Stanley Meyers has a similar setup as yourself, except that he was demonstrating mains power hookup (assume it is 115VAC) at approx. half an ampere of current running very cool and with far more hydrogen bubbles involved. I believe it could be optimised more by applying >40kV to get the water vapour/gas into an excited plasma state, thus driving the efficiency of the process even further.
It draws 6 amps at 12 Volts. Whatever that does for ya. I figured how much electricity it takes to put hydrogen to use would be a more important question.
Real question is, do you get at least 101% Faraday? Stanley's wfc produced gas at 1700% Faraday rate. Please at least tell us how many Amps it draws at what Voltage.
try High temperature electrolysis at 80-100c is more efficient economically than traditional room-temperature electrolysis because some of the energy is supplied as heat, which is cheaper than electricity, and because the electrolysis reaction is more efficient at higher temperatures. search Wikipedia
@eloid777 The only issue with heat is that it makes water boil and become a vapor in which it is difficult to make pure hydrogen from. Over heating is and issue we had to work with by using a pulse generator and not using too thick of material because it could not dissapate the heat quickly enough. I would be more than interested to see what results you have came up with. These are just our findings.
Do some reading on titanium dioxide look it up in wikipedia along with HTE, both have been proven scientifically. Hight temperture Elecectrolysis is more effient economically than traditional room temp electroylis because some of the energy is supplied as heat. Which is cheaper than electricity, because the electrolysis reaction is effieceint at higher temps.The process described is more than koh operating at 100c, do some more reading.
@catshazam I have another video which shows a bottle being filled. You can watch it. But really it isn't about how much you can produce per minute, the real key factor is if you can produce it without using lots of energy. This has been our goal since our group started over 7 years ago. Our answer was to not have the tubes surrounded by water and immediately capture the hydrogen into a tank before it gets attracted back to oxygen again. Feel free to check out our other videos and website.
I'm very interested in buying your Meyers water fuel cell- how much are you selling each unit for? I'm also interested in the pulsed voltage generator system which permits the high volume production of Hydrogen and oxygen.
@mindthoughts1974 you can go to our website to get a better idea of what is real and what isn't. I suggest reading our hydrogen information page before purchasing anything. I only have the one unit and don't sell them on a regular basis. Our group mainly just likes to bring information to people but I would sell our large tube system since the newer ones we make are not surrounded by water. Visit drinking-water com.
No. Too many variables make it difficult to get an exact measurement. Even with a flow meter simply temperature or voltage can change the flow. Besides it really doesn't matter. We have one which puts out a tremendous flow of bubbles, but that really doesn't mean it is usable hydrogen.
Yes it could as long as you have the same options such as a re-wired alternator, 110V inverter, and enough battery power. You would also need to modify the engine to run on hydrogen.
You can go to the drinking-water site or simply take two tubes of stainless tubing and keep an 1 mm distance between the two tubes. I also have schematics for the pulse generator on my website. And, no I haven't made any money from the hydrogen projects I have done. I have spent thousands trying to help others and now several groups throughout the world are running vehicles on hydrogen. I cannot however get many to use it in the US because they want the new camero. It's hard to fight propaganda.
hydrogenauto 1 week ago
How do you make one... no i don't want to be told some bullshit which i have to pay for thank you, hope that is not offensive to you unless that's what u are trying to do
SuperRorylewis 2 weeks ago
Hi HydrogenAuto, In a rare high quality television documentary DVD that I have,
Stanley Meyers has a similar setup as yourself, except that he was demonstrating mains power hookup (assume it is 115VAC) at approx. half an ampere of current running very cool and with far more hydrogen bubbles involved. I believe it could be optimised more by applying >40kV to get the water vapour/gas into an excited plasma state, thus driving the efficiency of the process even further.
ShinkoNet 4 months ago
@ShinkoNet I think your heading in the right direction.
a2zhandi 3 months ago
The stanley fuel cell ? The water don't contact the electrodes in his cells.
LOWEFERRARI 5 months ago
It draws 6 amps at 12 Volts. Whatever that does for ya. I figured how much electricity it takes to put hydrogen to use would be a more important question.
hydrogenauto 5 months ago
Real question is, do you get at least 101% Faraday? Stanley's wfc produced gas at 1700% Faraday rate. Please at least tell us how many Amps it draws at what Voltage.
exolosars 6 months ago
@minase0906 can you please send me a copy to my email address? or even to me here via a message?
mindthoughts1974 9 months ago
google
New Way To Split Water Into Hydrogen And Oxygen Developed
eloid777 9 months ago
try High temperature electrolysis at 80-100c is more efficient economically than traditional room-temperature electrolysis because some of the energy is supplied as heat, which is cheaper than electricity, and because the electrolysis reaction is more efficient at higher temperatures. search Wikipedia
eloid777 9 months ago
@eloid777 The only issue with heat is that it makes water boil and become a vapor in which it is difficult to make pure hydrogen from. Over heating is and issue we had to work with by using a pulse generator and not using too thick of material because it could not dissapate the heat quickly enough. I would be more than interested to see what results you have came up with. These are just our findings.
hydrogenauto 9 months ago
Comment removed
eloid777 9 months ago
Comment removed
eloid777 9 months ago
Comment removed
eloid777 9 months ago
This has been flagged as spam show
Do some reading on titanium dioxide look it up in wikipedia along with HTE, both have been proven scientifically. Hight temperture Elecectrolysis is more effient economically than traditional room temp electroylis because some of the energy is supplied as heat. Which is cheaper than electricity, because the electrolysis reaction is effieceint at higher temps.The process described is more than koh operating at 100c, do some more reading.
eloid777 9 months ago
Comment removed
eloid777 9 months ago
Comment removed
eloid777 9 months ago
Comment removed
eloid777 9 months ago
what is the measured amount of hydrogen in liters per min
catshazam 10 months ago
@catshazam I have another video which shows a bottle being filled. You can watch it. But really it isn't about how much you can produce per minute, the real key factor is if you can produce it without using lots of energy. This has been our goal since our group started over 7 years ago. Our answer was to not have the tubes surrounded by water and immediately capture the hydrogen into a tank before it gets attracted back to oxygen again. Feel free to check out our other videos and website.
hydrogenauto 10 months ago
@hydrogenauto FINALLY, a proper analogy of an efficient system NOT based on lpm.
Thanks
a2zhandi 3 months ago
I'm very interested in buying your Meyers water fuel cell- how much are you selling each unit for? I'm also interested in the pulsed voltage generator system which permits the high volume production of Hydrogen and oxygen.
mindthoughts1974 11 months ago
@mindthoughts1974 you can go to our website to get a better idea of what is real and what isn't. I suggest reading our hydrogen information page before purchasing anything. I only have the one unit and don't sell them on a regular basis. Our group mainly just likes to bring information to people but I would sell our large tube system since the newer ones we make are not surrounded by water. Visit drinking-water com.
hydrogenauto 11 months ago
can't you measure the flow exactly?
Jay12341235 2 years ago
No. Too many variables make it difficult to get an exact measurement. Even with a flow meter simply temperature or voltage can change the flow. Besides it really doesn't matter. We have one which puts out a tremendous flow of bubbles, but that really doesn't mean it is usable hydrogen.
hydrogenauto 2 years ago
can this run a doonbuggy like stans?
Jay12341235 2 years ago
Yes it could as long as you have the same options such as a re-wired alternator, 110V inverter, and enough battery power. You would also need to modify the engine to run on hydrogen.
hydrogenauto 2 years ago