@296bry296 Doesn't have to look close enough to be a mid-air collision to be close. Since WoAI I've had jets pass literally right over me less than 1000 ft radius, they can pass within 300 ft if it's dense and with a little luck.
@ChainChomp2 1000 feet is nothing, trust me. fly on VATSIM on a busy day which is still not like real life traffic, you will have that happen to you atleast 2 times.
@296bry296 I used the 1000 ft as an initial view because regulations want 1000 ft lateral and vertical separation (not exactly a 1000 ft radius). I did join Vatsim but only a for a couple of weeks because the software causes fatal errors when using the flight planner. In Free Flight using WOAI I've had jets pass less than 100 feet above or below me in semi-dense areas.
no, i cant say that i do... if you are, you might be overweight, which i believe if you just load the plane and go you will be. so maybe that is your problem (if you are having one)
what i meant was when you pull back, it stays there and you could get a tail strike easily or you use up the whole runway before you take off. i was just wondering cause i have the same type of plane.
do you have flaps set? you should be using 5-15 degrees of flaps depending on your weight (the heavier the more flaps you need)
check you weight the next time, i would bet money your severely overweight if it cant get off runways. if you just load the plane and fly its defaulted overweight.
@planetrainboat Ive had that problem with some posky planes. Also, the brakes are almost non-existent on some. What I do is increase the rudder scalar value and the toebrakes scalar value in the aircraft.cfg file. Works every time.
Nice video. Ive flown that exact plane from lax to hnl in real life. I think it was the same flight number too :)
@kryton213 This POSKY 767-300er works in fsx too. You just have to assign an fsx default panel to it. Just place the aircraft folder into your fsx aircraft directory and then alias the panel to the default 737. U can PM me if u need more help.
there is a key assignment that you can hit and it will do it... but there it wasnt... i made it look like it was... also to have jetways at all ur graphics has to be set high
1x,2x,4x,8x,16x,32x.64x,128x. 1-16 is all thats allowed while autopilot is on. time compression is where you speed up time in the game. the buttons is R, then use the +/- keys to increase or decrease. so if im doing a flight that is 2hrs long, if i turn it up 2x, it would only take me 1hr to do it in life, 4x would be .5 hr,etc... hope that helps
sorry never saw this comment... u go to the aircraft folder in teh main FS aircraft folder or simobjects-aircraft folder if fsx, and open up the fde and change figures for watever u want to change...
u right click and there will be under views called traffic (i believe its called that) and it will give u a list of near aircraft. u just click on one...
why are changing views all the time?
MrKriszIsten 1 year ago
dude u obviously dont kno anything about flying if you think that was close.
296bry296 1 year ago
@296bry296 Doesn't have to look close enough to be a mid-air collision to be close. Since WoAI I've had jets pass literally right over me less than 1000 ft radius, they can pass within 300 ft if it's dense and with a little luck.
ChainChomp2 1 year ago
@ChainChomp2 1000 feet is nothing, trust me. fly on VATSIM on a busy day which is still not like real life traffic, you will have that happen to you atleast 2 times.
296bry296 1 year ago
@296bry296 I used the 1000 ft as an initial view because regulations want 1000 ft lateral and vertical separation (not exactly a 1000 ft radius). I did join Vatsim but only a for a couple of weeks because the software causes fatal errors when using the flight planner. In Free Flight using WOAI I've had jets pass less than 100 feet above or below me in semi-dense areas.
ChainChomp2 1 year ago
very nice! I subbed :)
Aviation4FSX 1 year ago
Where did you get the repaint for Hawaiian for the Captainsim 767?
airsquad9 1 year ago
@airsquad9 ts not the captainsim model, its projectopensky's.
however you might find one for captainsim at their site or at avsim
flighsimer 1 year ago
perfect song....
TheOreo32 1 year ago
get real traffic woai, makes it alot more realisic
tomsamja 2 years ago
Do you have any troubles taking off with that plane?
Anyway... great video!
planetrainboat 2 years ago
no, i cant say that i do... if you are, you might be overweight, which i believe if you just load the plane and go you will be. so maybe that is your problem (if you are having one)
flighsimer 2 years ago
what i meant was when you pull back, it stays there and you could get a tail strike easily or you use up the whole runway before you take off. i was just wondering cause i have the same type of plane.
planetrainboat 2 years ago
do you have flaps set? you should be using 5-15 degrees of flaps depending on your weight (the heavier the more flaps you need)
check you weight the next time, i would bet money your severely overweight if it cant get off runways. if you just load the plane and fly its defaulted overweight.
flighsimer 2 years ago
i can get off the runway but i think im starting to get it, thank you. i appreciate the help
planetrainboat 2 years ago
@planetrainboat Ive had that problem with some posky planes. Also, the brakes are almost non-existent on some. What I do is increase the rudder scalar value and the toebrakes scalar value in the aircraft.cfg file. Works every time.
Nice video. Ive flown that exact plane from lax to hnl in real life. I think it was the same flight number too :)
zeroturbulence 2 years ago
i will do that. thanks!
planetrainboat 2 years ago
@zeroturbulence yup it was.. .I wann go back soooo bad.
btw I'm lookoing for a HA 767 for FSX
kryton213 1 year ago
@kryton213 This POSKY 767-300er works in fsx too. You just have to assign an fsx default panel to it. Just place the aircraft folder into your fsx aircraft directory and then alias the panel to the default 737. U can PM me if u need more help.
zeroturbulence 1 year ago
it is straight from the projeckopensky page also...
flighsimer 2 years ago
nice video!
captainbutch 2 years ago
how did you get the jetway to come to the aircraft?
mnlside02 3 years ago
there is a key assignment that you can hit and it will do it... but there it wasnt... i made it look like it was... also to have jetways at all ur graphics has to be set high
flighsimer 3 years ago
How did u get the Airlines and also how do u put it on the Flight Sim
brysanhawaii123 3 years ago
how long did the flight really take you?
flightsimpilot123 3 years ago
half hour(if that) with time compression...
flighsimer 3 years ago
what do u mean time compression
Slade366 2 years ago
1x,2x,4x,8x,16x,32x.64x,128x. 1-16 is all thats allowed while autopilot is on. time compression is where you speed up time in the game. the buttons is R, then use the +/- keys to increase or decrease. so if im doing a flight that is 2hrs long, if i turn it up 2x, it would only take me 1hr to do it in life, 4x would be .5 hr,etc... hope that helps
flighsimer 2 years ago
What did you do to that 767? It runs really smooth. All the posky 767's i had could never land normally.
thunderdragon14 3 years ago
u mean turning? i just changed the fde...
flighsimer 3 years ago
how do you change the FDE?
mnlside02 3 years ago
sorry never saw this comment... u go to the aircraft folder in teh main FS aircraft folder or simobjects-aircraft folder if fsx, and open up the fde and change figures for watever u want to change...
flighsimer 2 years ago
i can't fiugre it out what is fraps. i think that my fsx lags because of the fraps. i need your help if you can help me.
mattsta12345 3 years ago
nice landing . you're a good pilot
astronoman11 3 years ago
thanks.
flighsimer 3 years ago
oh btw how did you switch to the AI view?
astronoman11 3 years ago
u right click and there will be under views called traffic (i believe its called that) and it will give u a list of near aircraft. u just click on one...
flighsimer 3 years ago
nice video and song matches
MotoXhonda50 3 years ago
Nice song choices =)
SpaceMedic 4 years ago