Smart Parts Ion Disassembly and assembly

[Pitoloco4127]

no spring?

[Larousse1995]

Geez dude turn the blink down, could hardly hear you.

[thelaxking25]

Hey i was wondering that because i havent relubed the bolt ever, will that cause the gun to shoot little puffs but not actually fire balls, as in the piston fires but not the whole gun

[matthewmarrs123]

my main question where can you find the plug in's for the laser eye's..because the wires on mine are like shot maybe that's why it didn't shoot have the time.

[MrMovieTron]

where can i buy different grips?

[rcsage7]

@MrMovieTron go to Ansgear.com

[DaRkEsThOuR360]

man i cant get the back part of the hose in.... dosent seem to want to go in

[ProdigyM16]

iv been playing speedball for 5 years kept the ion all 5 fully upd now and have a shit pile of money so buy an ion play up have money for gear maybe even an ego or bob long :)

[yo3mommas]

Blink 182 ftw :D

[PAINTBALLFREAKKK01]

great video u helped me alott.

[DangerManXX]

Music is TOO loud to compliment the video. Especially if others don't share your interest in music. In this case it's just annoying. I see this often and find another to watch. LEARN FOLKS.

[Logan11Sheats]

Great video but can you do a video on how to change the trigger because my trigger snapped in half.

[einsnico]

thanks, this video was VERY helpful.

[imsofly74]

hey dude i cant put my back bolt in on the gun it wont find the threads can u help me

[EasternElite]

BEST PAINTBALL GUNZ EVAUR!!!

[wdblogic]

DUDE turn the music down. I can't hear most of what ur saying!

[jizzems79]

wow so much jus to maintain... wow smart parts shit design much...

[CuzIwasBored]

Do I have to do this to get the XE kit on?

[IndyBaller23]

on the part in between the firing bolt and feedneck is there supposed to be an o-ring cause i have one thats keeping me from screwing it down all the way so nothing goes together

[paintballing03]

@no i dnt think so..

[paintballing03]

aww.. dude good vid... i was puttin my board back on the top black peice and where the screws on the wire to connect it i tightened 1 of them so tight that it broke... so i drilled the half of the screw out... put the screw where it wld go an put a lil peice of tape over it... its ok tho bc it stays and is fine...... an only a little like 1 in peice of thape sticks out on both sides... thx :)

[Fatal4tunity]

Thanx man

now i know how to disassembly my ion

[ThePWNKNIGHT]

k i figured it out but are they 5/32 or 1/8 banjo fittings

answer quick please

[ThePWNKNIGHT]

does anyone no where i can get replacement noose or whatever their called screws they fuckin broke when i was screwing them back in .

im am so fuckin pissed

[colonials74]

another good video man but maybe no music nxt time its kinda made u hard to hear

[YMRInumba1]

Ok when I screw in my tank and pull the trigger the air goes into where the board and battery goes. I guess theres a little hole by the solenoid?

[christower50]

if you have the money for the g3 or the mini do not go for the ion. Ion's are for people with no money lol if you like a cheapish gun thats good performing get the g3 if u have a little more get the mini i believe its more.

[ccbshome]

Thanks man! All of you videos for the Ion are great! You have helped me so much! A++++++

[utuberocks452]

cant u just leave the board and stuff in the gun

[penguintheskater]

great vid VERY helpful! awesome!

[erlendply]

Thank you!

This helped me ALOT : D

[jeffhardy3457]

Thanks so much dude im new to paintball. i want to change the body of my ion and now i know yay

[qqddt]

i pushed the bolt back on my ion by mistake do i have to take the gun apart to it back through or can i fire the gun with the bolt back

[faraty2]

you can fire with the bolt back + if u have an on off asa degas it by turning it to the on position then just put your finger in the bolt and pull it out

[MegaMrMuffins]

so is the ion and the ion xe basicly the same thing?

[zsmithp]

xe has bolt out back

[wontonchewer]

yea i broke my eye wire along time ago :(

[paintballin101]

thanks man. awsome vid. finally know how to lube my freakin bolt

[TheNexon99]

awesome vid know i no how to put in a new triger ty

[paintballer1184]

Wow I remember watching this video when I had my ion and now I am currently shooting an Etek.

[blah23]

next time if your gona put music make it lower and put it as instrumental not fuking lyrics cuz i cant hear u

[FlickMyBick21]

Is the ion a good gun ?

[paintballer1184]

Yes, it will let you play tournament paintball stock. However, if you want a better gun don't upgrade, just get a more expensive one.

[LEMONCAK3Z]

im thinkin about gettin a new marker. I got a Spyder MR1 and the trigger is so far off from the contact point. I was thinking about getting a new rockback trigger... but then I realized that its a waste of money cuz spyders suck anyway (LOL) im thinking about which gun to get. its between an ION a DP G3 and a Invert Mini

[nopopallowed]

of those 3 dont even consider an ion. the g3 and mini blow it out of the water.

[LEMONCAK3Z]

ya but i think im gonna get a g3 cuz it has alot less bugs than the mini and it shoots straighter and its cheaper

[ridebmx1921]

i have a ion with black heart, new bolt, feed neack, the upgraded valve, and dye ultra light barral. and i beat my friend in a 1v1, the gun is only 10% of your playing. and good video man!

[falco1407]

@nopopallowed sorry but i dissagree if you get the right upgrades for your ion it will out perform most guns :P only problem is trying to locate the leeks x.x

[AnimalGirl328]

@nopopallowed I was wondering do you know i can clean the trigger? It is sticking

[YMRInumba1]

@LEMONCAK3Z SLG

[UltraCoolMovies]

@LEMONCAK3Z I would say the G3 of those 3 bit the SLG is a good gun to and it is cheaper then te G3

[dpstarcom]

@LEMONCAK3Z DP g3

[dpstarcom]

@LEMONCAK3Z btw if u see how complicated this disassembly is check out the dp g3 its literally a breeze

[X9Justin9X]

@LEMONCAK3Z

dp g3

[HITMANMONSTER]

@LEMONCAK3Z get the invert

[AceLockCo]

I can't hear you over the music. It seems like you have the music volume turned up and your speaking very quietly.

[halocallofduty]

my shooting chamber got a gap in it and now it wont fint in right someone help

[AlpineSkierX]

i have never taken apart a speedball gun before and want to know if it was hard for u to do the first time u tried

[tard1013]

i have that same barrel condom!

[rolltide085]

help i have an anti sphon tank (co2) with my ion which is supposed to keep it from messin up, but when i shoot the ball just rolls out of the barrel anyone kno?

[xbritt99]

Great vid. Helped me out. Thanks!

[goalie336]

my friends bolt wont cock.any suggestions

[MrAmaster102]

mine is so f***ed up... i have no idea what i did to it

[sk8erandp8er]

clamping feed neck new barrel possibly a new trigger, and save the board for last other then that you shouldnt be buy stupid ups that make ur ion look cool.

[Paintbalplaya606]

nice ion!

im about to buy one this week

what kind of drop foward is that? what did you have to buy to make your line from your regulator to your screw in?

[JamaicanBunny2]

thanks, and really nice upgrades, i am gonna upgrade EVERYTHING on my ion soon!!!

[racehonda9]

what is the second song?

[brownracing29]

Good Video but turn the music down!!!!!

[ILikePlayBoyAndStuff]

lmao.. ive been shooting my ion for 2 years.. every sunday never took my bolt or eyes out and dont have a problem with the gun

[yesurfucked]

Very true. bought a used ion from a tournament player. havent cleaned it once. with the exception of wiping off external paint. it still shoots fine and i love it.

[il2rock]

subscribed!!!

[VieraOnlyWow]

im having trouble putting the screw back in the barrel.

[Alexpwnt]

Worth paying a tad more for XE, just use bigger allen and boom out the back of the ion. ( BoB ).

[needsalife1029]

thats not a stock feedneck is it?

[attotaz]

of course not

[needsalife1029]

u have to use a low pressure tank

[P8NTBALLER987]

for what? i use a 3000 psi

[wallnutz123]

dsgballer: i just had tht same problem. u need to set ur dwell. gas the gun up, fire it then keep setin ur dwell higher and higher until u here a loud pop. then go up like two or thre more. then u should be good.

[dsgballer]

my gun is firing at 100 psi and the bolt isnt going all the way i changed the battery idk whats wrong,i ut an evil detentor reg on it and the pessure turned to high and blew the gauge please help

[NightKill55]

thats alot of work to clean the freakin bolt!!

[numanumapluma]

i followed ur steps and when i put it bak together i put my tank on and it started to leak of were the barrel goes at thats were it sounds lik if any body might have an idea on how to fix it message me

[5t4g3one]

do ions come stock with eyes?

[paintballstar777]

yep

[Spartan2552]

And this is why I like the Ion.

[irishXanie]

i just got my ion and its not the xe its like yours but i dont no were the bolt is

[happipillproductions]

He's to awesome to keep the same voice.

[leee121]

do u have to order new banjo fitings straight from smartparts or can u get them from a pro shop

[happipillproductions]

Well that just depends on if your local shop has them, I would guess not, they would probably have to order some. I would just replace them yourself, you can find them on the smartparts website.

[GUNman3893]

the eyes in my gun have this brown crust on top of it. Dont think its rust but dont know how to explain what it is. But what do i do? Should I try and clean it or what.

[leee121]

wow you voice changed alot for this video to your newer ones

[hairyballsack10]

how do you know when your eyes are damged

[nopopallowed]

they wont work.

[paintballing03]

@nopopallowed hey man... i hav the same board as u an everyting ... how do u turn the eyes on an off... please be specific thx

[IndyBaller23]

@paintballing03 pres the power button once, if the light blinks once every like 2 seconds then there on, if it blinks twice at a time in 2 seconds then there off,

[NightKill55]

so to change the body i have to take out everything???

[keoni767]

hey um i was thinking about getting an ion about how far is the effective range for it and how good is it right out of the box.

in your opinion

[playazzz69]

is that gun stock?????????? plz reply i'm new 2 paint ball and i was thinking of buying an ion

[zachproductionss]

do all the ion xe comes with the knob to top left of the trigger

[chevyboy47]

He's a guy... Die in a fire.

[Dennon21]

everyone please dont give this guy hate hes doing a great thing hes helping people who have problems..

[kigen818]

ive nvr had an ion and i wanted 2 know when you buy a stock ion does it hav eyes?

[gituardude1003]

eyepp

[kigen818]

thank you =)

[gituardude1003]

oh i should just add like StroggWarrior said it is petroleum based so only and i cant stress this enough only get it on the front 2 o rings the ones that in this viseo are white and green and use tincy tiny ammounts as it will burn you o rings to shit if you put to much in and you will have to do a compleat gun rebuild very samall amounts of the stuff is plenty to lube the gun up with ok if yo have any questions pm me as its quit a risky thing to do haha i do do it alot though lol

[chimaira1001]

yap.

[bhbh98]

can you use vasciline to lube your ion.

[StroggWarrior]

Try not to, because it is petroleum based, petrolium + high psi = not such a good looking face, happened to my cousin :/

[gituardude1003]

only ther bolt no wear els not to much !!!

[duckyking5]

what grips are you using

[StroggWarrior]

It looks like Hybrid grips don' know wat kind though.

[FUCKSMARTPARTS]

thts alot of work if you get a chop to clean the bolt

[244223]

ummm do u have any leak in you macroline/fittings bc i have the same drop and same asa and do plz respond

[xXJ3udlightxX]

i was thinking about buying this marker do you think i should get any upgrades other than the barrel and the hopper

[NIKEAF1NIKE]

*virtue board*

[deathsquad0]

virtue, yeye =]

[BLD382]

i put a drop forward and ur gonna need a new clamp

[n0dr0g488]

can you repost without music please?

[wilfrpb123]

turn down the music

[bren7dank]

Damnit! Music ruins it, but love the voice change at 0:31.

[woodsballer44]

good video. i have a leak in my ion and the air is comming out through the hole behind where the trigger is. any sugestions? i was thinking maby its one of the hoses inside the gun but im not sure. any help would b appreciated.

[mvpjs07]

I broke my spyder victor at the fields. The screw that holds the air tank in fell out. I'm getting a smart parts ion soon. This video could help me out in putting in a rake trigger for it. Great vid.

[paintball4freak]

i broke the eye wires. anyone know wher i can get new ones?

[qJwOeHrNty]

ohh the wires umm im preety sure that you have to get new eyes

[frostyinrehab11]

dude nice vid but make the music softer

[slog63]

Well explained, you did well.

[09ego]

Great song. Blink for the win.

[xNick777]

Done(: thanks for the vid. really really helped me.

[H011ywo0d]

People like to force their music on you for some reason. The ION is the best marker for the money, ever.

No problems and crazy reliable. All of my Spyders truly suck, I gave them (3) all away with all the extras I had ever bought so I would never be tempted to buy one again.

Just bought an ION. I love this thing.

[xNick777]

thanks! this helped me a lot. i wanted to know how to change the faceplate before i bought a new one. i want yellow or white(: anyways thanks very much. and your right there was another vid like this but there camera sucked and urs was actually still. nice vid. 5 stars. 5/5

[xNick777]

i got yellow lol

[xNick777]

im changing it right now. i just have to put it back together.

[aznpinoy17]

you should also mention not to over tighten the banjo fittings, because i just did that making sure that they were nice and tight and the threaded bottom part of the banjo fitting broke off and is now stuck in my gun.

[SpyderPB819]

Check out the ion forum on pbnation. How to fix that is in the ultimate sticky.

[cabeg10]

i agree no music

[dimetimetom]

dam man that nusic makes me not think straight, nice vid but drop the music

[andrewfool43]

do you absolutly have to lean the bolt after every time you play or every 2 or so?

[nopopallowed]

every few times should be fine. But it depends on how much you shoot each time. It is recommended for most spool valve guns to be done every 8 cases or so.

[Ntrot25120]

hey how do you change the velocity on this gun? im getting it in a couple weeks and id like to know b4 i start shooting it. haha plz reply

[dimetimetom]

bolt under the reg.

[pballinsanity]

this is to confusing somebody help me

[kmontanaro23]

this video helped me a lot actualy all ur videos do. keep it up!

[Angle1101]

Hi I'm new with paintball. What kind of paintball gun you would recommend for me? I would like to play speedball.

I am just beginner so i need good to practice but cheap.

P.S. Contact me by Personal message

Thanks

[inthepeloton]

the ion is the best way to go

[paintballz2470]

hmmm i think you should go with a spyder vs1 or pilot, something pretty easy to maintain that works well, an ion is decent but maintenance is kinda a pain in the ass because you have to like completely take it apart to access the eyes, bolt, detents, etc.

[ATLpaintballer]

ion, vibe, slg, spyder sonix. depends on your budget. sonix is really good for price because it has spring ball detents and has no bolt o rings never chops. ion is the best way to go though. dont spend much upping it. asa and feedneck. no more...

[quazeyman]

trigger, barrel, body, board, its neverending

[ATLpaintballer]

barrel? SOME tourneys allow stock ion boards. hes playing rec to start out with.

[Angle1101]

and what you think of proto slg?

[ATLpaintballer]

great markers. but, if you want to use co2, or play in 1 hr plus games, vibe is the way to go as you can put co2 on it with no issues. slg has a great reg, used on their 1300 dye dm8s, prety good barrel i heard, great board, but it needs a new feedneck. slg is 200, ion is 165, vibe is 140, sonix is 80. i only recommend sonix if you cant afford to shoot a case or two a day.

[xImEdGe24x]

co2 sucks, its very inconsistant and inaccurate. not only that, its one of the causes of global warming. oh and, the slg uses the same type of reg but, it has its own special threads because dye decided to be gay. if anything, go with the proto matrix rail. (also made by dye) it costs around 260 and its just like the better version of the slg. it uses the same regs as the dm8's and it has the same threads as them too. on top of that, it already comes with a good feed neck.

[Paintball9361]

I just did it with my Epiphany, which all in all isn't too different from an Ion. Its relatively simple to do...

Agreed with Robthegreeaat

[checkoutjestybeatz]

yeah like rob the great said, i was scared shitless to take it apart but its easy once you get the hang of it

[robthegreeaat]

i dont understand how people can own an ion and not know how to do any of this. im not saying its a bad vid but i mean come on ... every ion owner should know right from the beginning how to clean and maintain your marker. please. please.please. dont be afraid to open ur gun and clean it after every play ... its much worse to leave it alone! TRUST ME!

[lilyosMOB]

holy shit dude thats one complicated gun btw good vid

[ford927]

hey nice vid but i still am not sure if i am ready to open up my ion i will definatly break a wire:(

i have no skills when it comes to electric stuff but nice vid it helped me understand my ion more

[checkoutjestybeatz]

do it. trust me, its worth it

[ford927]

i know i will its just my forst electronic gun i mean my tippmann i have tooken apart 400times and my spyder even more (manly for reapairs)

[kevler8803]

thnak you, helped me alot, didnt want to open up my gun, other videos dont explain proplery too

[Death656]

this gun is awsome for 169 canadian dollars

[magnaiskool]

Your music is fucking loud

[dye313]

LMFAO 5 mins to just take out the bolt. xD

[hntr84]

dude love this video i am going to get the forest green body kit for my ion and i didnt kno how to take off the big body part awesome

video but i was flipping my shit cuz i have the 360 QEV and shit and i unscrewd it.

and it came of. but again thanks!!

***** video

[pballercory]

if you guys have problems disassembling the gun you can just get a easy bolt out the back for it its 80$ dollers or get an ion xe i got one great gun/ nice vid man

[wilfrpb123]

cool vid

[pbpro115]

good job.keep it up!

[BunkerMonkey123]

I have air coming out the barrel, any suggestions about what could be wrong?

[MXpsycho52]

messed up threads maybe

[BunkerMonkey123]

you have no idea how much this helped me, very thorough and well explained thanks for making this man

[paynestar420]

good video, it really helped

[oubasy]

Fuck Help ME!!!!!!

I was tighting one of the bolts on my ION and Half The Screw Broke Off While Still In And I cant get it out can someone help!! Thanks

[nopopallowed]

Try to JB weld an allen wrench to the broken part. When it is set try to twist it out. It will ruin the allen wrench but save your body. You can use something other then an allen but its a good example.

[98suprainnj]

hey uh how do u remove the donut swivel i bought a new 1 and i dont know how to get the old 1 off

[98suprainnj]

ma gun is leaking bad out barrel nd feed neck i think im missing bolt stopper cuz wen i put tank in i hear thump wen i take apart bolt sticksout of back