Added: 3 years ago
From: billg519
Views: 57,650
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (177)

Sign In or Sign Up now to post a comment!
  • Can't wait to find out your electricity bill...

  • is this a pig or just a big mot stack?

  • are those red lines pure electricity or fire?

  • @Aaarrriii1998 This is actually plasma. The initial short arc heats up the air so much that it turns into conductive plasma, allowing me to stretch out the arc. The electricity flows through the plasma keeping it heated until I stretch it too far and the connection is lost.

  • is tat somthin like fire???

  • bellooooooo! in stile arco di fulmini inFAMOUS

  • is at resonance? if not i would like to see it!

  • @ExplosiveAnyThing Caps were used, they aren't too visible in the video always as they are on top of the transformer, but they did boost the output. I was not fully at resonance as I was on a 60A breaker and did not want to trip it.

  • ooo microwave capacitors

  • I thought it was 10k volts to jump a 1cm gap, so how does 12k jump what seems to be 5~7cm?

  • @7FCx The arc is actually being struck much closer than 5-7cm. Angles and distance exaggerate the appearance of the gap. It does strike at around 1cm, the current allows it to be drawn out substantially.

  • That's Chuck Norris's cum...tehehe...

    

  • @billg519 lick it!

  • you gotta love that sound :)

  • scary as fuck D:

  • omg

  • damn id like to touch that jelly

  • English: Where are you 12000 Volt?

    Deutsch: Wo haben Sie 12000 Volt?

    Français: Où obtenez-vous 12000 volts?

  • UNLIMITED POWAAAAAAHHHHHHHHHHH!!!!! 

  • how large is that wire? :/

  • cool beat.

    

  • I want something like that!

  • @xXDarkMidnightSunXx Save up your MOT's and microwave oven caps ... I needed 6 similar MOTs to make up this pack. The cores are under oil.

  • But, will it blend?

  • What transformer did you use? Pole transformer,Mot or what?

  • @ExplosiveAnyThing I made the transformer from 6 MOTs. I cut them apart and made up three double E cores each with a primary and two secondaries. Three of these in series are under oil. Needs a 60A breaker or better to run if unballasted.

  • @billg519 Oh my god!!! 60 amps are..... A LOT!!! nice video by the way .

  • is this plasma?

  • @aceFX1126 Yes, the glowing plasma results from the current flow through the air.

  • hey now if only you were an angry russian with a grudge you could be backlash from ironman

  • ho my god!

  • How much is your electricity bill?

  • @nfs352003 I don't run these things every day, so they don't affect the bill too badly.

  • im gonna have to say yes to this video

  • witchcraft!

  • Ghost Busters ray

  • Impressive! Well that explains everything you wrote to me.

  • Touch it! 0_o

  • oh and it is an aweome video

  • @x3C40x Thanks. :)

  • the only reason i clicked on this is because your user name is the same as my last name. hmm interesting

  • FAKE! !

  • @DoucheBag491 Lets see ... You have no videos posted to your account, and just want to troll. Your screen name says it all. I'm not going to delete your comment, I'll let it stand for all to see. Anyone with a little knowledge knows that this is for real.

  • @DoucheBag491 Lets see ... You have no videos posted to your account, and just want to troll. Your screen name says it all. I'm not going to delete your comment, I'll let it stand for all to see. Anyone with a little knowledge knows that this is for real.

  • @billg519 Real looking electric arc, 60htz sounding electric arc. Nah could'nt be real. Not one bit. Lmao. You using a MOT?

  • @DJSpikesan Nvm. looks like a neon transformer.

  • @billg519 Rage.

  • @DoucheBag491. your 20 and like swagger jagger.hmmmmm enough said .you say that its fake but im guessig you never seen a resonate mot stack ,sorry microwave oven transformer stack to the moron !try buildin one and touch to two outputs coz nothing will happen its fake remember.hahahahaha

  • @DoucheBag491

    Obviously someone here failed physics.

  • @simpsoncheat Nah Id just say he is simple minded ( ;

  • 20 bucks it you touch it.

  • how do you make it

  • @sparta300epic This is made from 6 MOT's, heavily modified by cutting and welding into three 4kV units placed in series. They are in a container under oil.

  • @billg519 oh thanks im playing with it right now thanks

  • Really cool

  • one touch then instant dead

  • isn't that dangerous?

  • @TheFailBin You must have one hell of a toaster!!!

  • Wow.

  • Did you guys see that part where here made an electrical arc!!! That was my favorite part! :)

  • Now attach a mechanism to your arms allowing the use of aiming so you don't get electrified when using it and we have Cole from INFAMOUS!

  • this vid is 10x better when you mute it

  • Why does the arc bend like that if electricity travels along the path of least resistance? Also, why do the pieces have to come so close together to start the arc if it can stretch as far as you stretched it?

  • @mondays89 Voltage determines the arc starting distance. Current allows the arc to be stretched out. A plasma channel forms in the air and is the path of least resistance. Since this plasma channel is in the air, it moves around with air currents.

  • now this is a legit ghost buster

  • you created a monster !!!

  • touch it :D

  • THUMBS UP IF YOU THINK THATS PRETTY COOL

  • omg

  • i made one of those

  • is that screwdriver ment to be so close to the wire?

  • looks like fire 2 me

  • try n touch it :D 

  • Simply awesome.

  • pause at exactly 1:56 or 1:57 you will hear a fart ofter he puts it down

  • It's time to kick ass and chew bubble gum.. and i'm all out of gum..

  • Damn......

  • the air has to smell really terribale

  • THIS IS FREAKIN AWESOME

  • is that arc like hot that it was on fire?

  • @InnocentBearz

    At this current level, the arc is burning hot plasma. Sometimes it melts the tip of the chicken stick electrode. The metal plate that the arc is striking also warms up, it is 1/4 inch thick.

  • So that's how raiden came about...

  • how do you get so much volts .??

  • @LittlemanDR

    Microwave oven transformers under oil.

  • finger...

  • wtf!!!! r u crazy!!!!!

  • But will it blend ?

  • @Maciek1

    Sorry, no blending. I don't think that the blender would like this power source.

  • Haha looks like it never gets old.

  • why i wanna touch that?

  • ale spawara :DD

  • how big is your eletrick bill???

  • @alluxe1 electric* Learn to spell. :)

  • @alluxe1

    I don't run these too often, so electric bill is OK.

  • @billg519 i fucking love the sound it makes!!!!!!!!

  • hey man, can you reply to this video? i'm worried about you and 12k volts :/

  • @TheFuzzyPwnage

    HV is fun and I've been careful with it for over 30 years. Not a voltage and current to start out with though. I started with an oil burner transformer that was limited to a much safer current of 23mA at 10kV. Nice arcs from it but safer as the current is below the 30mA death threshold.

  • @billg519 I love learning about new things! Loved your video man!

  • @TheFuzzyPwnage boo! Don't discourage him...

  • @Voldemorty2001 i'll try not to. though i didn't know what i did wrong.. :/

  • is it can kill justin bieber its goog stuff

  • Great trick. Now stick your hand in it

    

  • can it revive a dead body?

  • wow man be careful O__O

    don't fuck with it

  • i dont want ur electric bill. :D

  • i want it...

  • can i touch? LOL

  • @jakswaful yea. one time :D

  • and where did you get 12k volt from?

  • Comment removed

  • @akinorhan5

    I'll let your "fake" comment stand as a monument to your complete and utter lack of any knowledge concerning electricity. Also, based on your complete inability to spell properly, punctuate, or structure a sentence, you might consider asking your school ("shool") for a tuition refund.

  • @billg519 why are you looking at my english -_- im saying its fake answer at that dont comment for my spelling lol

  • @billg519 okey i will delete my commet its real sorry guy

  • TOUCH It ;)

  • touch it =)

  • the new ultra super mega flame!

  • Yup, that's safe...

  • now thats just shoking :D lol.

  • lol

    i think u should make the handle out of metal

  • I want to touch it.

  • do u even got a electric shock?

  • are you crazy?

  • amps kill not volts (:

  • @RevolutionVivi Exactly. If you take 12,000V and you put it through the average skin resistance of 1.25M Ohms you get an amperage of 9.6mA (0.0096A) which won't even stun you.

  • @x98347x

    This 12kV will punch right through the skin to get to the low-resistance internal body. Flaming fiery death.

  • Touch it.

  • nice sound.

  • thats just scary.

  • Do you think that would charge my iPad hmm???

  • @MrAbt9283

    lol charge it into another fiery dimension !!!

  • my dad bought something like that and was useing it but i came and almost got hit by one of the arc's but my dad pushed me out the way so i didnt get hit :D :P :)

  • please, i can do this with my finger tips.

  • Tutch it!

  • makin a bit of ozone there...

  • 12k would blow any house hold circuit

    im guessing he is using a separate battery

  • @icykickflip

    12kV is the output. A 60A 120V breaker supplies this transformer.

  • Man next time put your balls in between :D

  • sounds like a hair clipper...

  • i like the very long cardboard tube your protecting youself with lol

  • it's cool. i think it cost a lot of electricity.....

  • Sucks to be the person to pay the electricty bill

  • good skilz caus if you touch its game over anbd no sands of time 

  • good skilz caus if you touch its game over

  • Lol if u cantons a way to keep a plasma stick by one blast and stop u could generate about double u used to make it

  • 0:18 what is thas sound before the arc???

  • put a water bottle around it or smth

  • beatiful arcs

  • what transformer is that

  • one day ur gona killyourself 

  • ill give you a nickel if you touch it

  • safe FTW

  • I use quad mots

  • You are one smart lad bill!

  • Holy-Terrorist:>*=* very cool, what your stuff for haves electric arc ?

  • is that flame or electricety?

  • It's electricity all right. It looks like a flame because of the air being turned to flamelike plasma by the high voltage at considerable current.

  • wow......

  • wow i

    dident know that! -_-. awsome i really liked it but i have a Q. whats the lowest voltage to do that (mini)?

  • @billg519 "you've had it too easy for too long, air."

  • you got balls. i wouldent fuck with 12k volts

  • @berserker2391

    I wouldn't be worried about volts, the amps are what kills you

  • What is the buzzing sound

  • 60Hz power hum from the AC.

  • @billg519 u mean the transformer lol

  • @billg519 In different countries the humming sounds different.

  • Power source is modified MOT's under oil. 6 MOT's were heavily modified into 3 large cores producing 4kV each, placed in series. Capacitors are used as a high side ballast to regulate current. A chicken stick is used to avoid electrocution.

  • @billg519 I'd like to know more about this power supply. Do you have more details posted somewhere?

  • @billg519 and how dont they arc over?

  • @billg519 Also, I know what you did to do this, BUT, do you use 2 primaries per giant core or one primary per core with the 2 secondaries

  • cool I hope you don't ever get a shock

  • is that a mot?

  • nice vid Bill. Awesome arcing action!

  • dose it explode mist water?

Loading...