How To: The Nerf Raider CS-35 Mod Tutorial (AR and Safety Removal, Jam door Removal)

[bananakingxD]

where do you pad the plunger?

[janicenice24]

U should integrate it with a long strike

[TheWardensArms]

@janicenice24 That's an awful idea.



[TheLegoStopMotioner]

@janicenice24 The longstrike is a amzaing gun by itself,dont rip it apart and put it into a raider. I agree with TheWardensArms (above)

[beymon2004]

how do i find you on ebay??

[themenofmovie]

Draco are you a lefty?

[ASGPSTS]

do you think the raider spring is the same strength as the recon spring? never mind if you don't know.

[ntecproducoes]

What Do You Remove the nerf to increase power?

[TheRawAnonymousGM]

Are you selling a modded nerf raider as its abit too complicated for me to mod? Thanks

[barneythedog28]

no top comment, i like airoplanes

[Orna123]

ok forget my last comment, i got the gun to work and all abckt ogether, but one question, what was the pooint of the clip lock removal? It still is impossible to take the clip in and out while the pump is foward, because the tube that loads the darts needs to fit inside the clips little curved parts ont he top that holds the darts. so basically the clip still cannot be taken in and out is the priming handle is foward. ?

[Orna123]

Hey i did all your mods but for some reason i cant get the thing to work when its put back together. I only did what you said to in the video, and when i put it all back together the pump wont go back, its like stuck. Any advice to help?

[6661Darklord]

i did this and took off the jam door THAT IS IT and now the gun is a un loading un firing and all and all pull the trigger than nothin gun... wothless

[hominine11]

just saying u should zoom out when showing the whole gun :)

[hominine11]

ur awesome

[bmesch2k]

do you know what the button next to the clip well dose?(not the mag lock)

[XxChIcKeNuGgEtxX]

cool i might try that



[commanderstealth]

i have a problem

my raider is a gear up and it sometimes jams mid way

i that a model default kinda thing of just having a demented reaider then again my friend has 2 and they glide smoother

[ninjablood100]

DUDE I have to thankyou soooo much it worked perfectly and it shoots about 15 ft furthur again Thanks.

[Ps3AirsoftFootballer]

WHICH GUN SHOULD I GET RAIDR OR STAMPEDE

[100fakeman]

@Ps3AirsoftFootballer stampede. comes with three 18-dart mag biatch!and the guns pretty cool

[MrAndre416]

@Ps3AirsoftFootballer which do you like better???

[thegabster173]

@Ps3AirsoftFootballer get the stampede its a lot better because its full auto and it comes with loads of cool attachments plus 3 18 dart mags

[NeutralDepth]

That's a nice ring you have there

[BemusedChain0]

I found a little orange piece attached to a spring and now when i pull the trigger after cocking it, nothing happens. Help?

[bigphantom75]

@BemusedChain0 i would love to help but its nearly impossible without pictures. Is the orange part out of the gun?

[a007master]

2:54 whats that orange piece on the left for?because i toke that out.

[mun1chy]

i done the ar removal and my raider fires much better

[Failurekids]

we fucked up 2 raiders beacause of u u pice shit mother fucker ur a damn prick and go to HeLL

[Overkill90z]

@Failurekids or you are a dumb ass who cant mod for shit

[TrippTheVandal]

@Failurekids How can you be that retarded. Why would you do it to a second one if you fucked up the first time. You cannot blame him for fucking up your raider when you're doing the work,

[achaser100]

@Failurekids or you fucked them up because your name is failurekids and you look like your 8 and you are CoD fags He showed you You opened it HE didn't break it you did

[Failurekids]

@achaser100 IMM 15 I MADE THIS CHANEL A LONG TIME AGO

[achaser100]

@Failurekids actually you made it 2 years ago don't try and lie to me kid.

[nerfreviewdudes]

also if any one else sees the comment below can u plz also go to my channel, click on my like below this comment cuz i dont think it will show up on the search bar. i only have one video up so far, plz give some advice on what i should do next and plz comment rate and subscribe. also give advice on wat i can improve.

[nerfreviewdudes]

hey drac i think ur awesome and i would like to ask if u can just visit my channel and see my nerf gun reviews im just starting with a friend of mine, i dont have alot of videos up yet i just started and would like some tips. plz comment on the video telling me wat i can do for the next video and if u can respond in this week cuz im trying to get a video up every week if i can but i will probably be late since i dont get with my friend every week. i only have one video up so plz give some tips.

[eyeseez]

Would this work if the bullets don't come out of the blaster at all?

[tier1films]

i lost my catchspring and broke my triger spring because of you so in the future do bether totourials

[MineCraftTNT1]

@tier1films It wasn't Drac's fault that u suck shit at modding guns he just shows u what to do whether u do it right is your problem so piss off jackass

[JoshdaROCKSTAR9999VS]

@tier1films You retard, its not HIS fault YOU broke YOUR gun. His tutorials are great, you are just incapable of understanding.

[StrykerVX1]

Which one of the springs should we remove after removing the clip lock? Since the video showed us 2 springs, one going horizontally and one vertically, but you didn't show us which one you removed. Also, the orange piece that was holding the clip lock in place, must we re-attach that?

[PaperProdigy313]

you should do a hvz vid with someone following you hiding and stuff filming you taking out zombies and stuff because i wanna see you in action

[zanesmith666]

what is the bonus of removing the clip lock removal?

could you do a video of taking it apart and putting it together again?

[Jackel961]

thx dude! now my raider is top of the line performance but, she's really picky about the darts i fed her

[jreyesonline]

did this to my brothers and now i gota buy him a new one :(

[NerfOps1001]

is that white piece under the boltsled mandatory for functioning.

[diamondlexie1]

thats very cool red drangons guy

[TheVaJohns]

thank you for not having an annoying voice like all the other people making these vids!!!

[ninjaxb5]

thanks dude my raider is now BEAST

[Kylex671]

Nice one Drac, big fan, but i have a question.

Do you have any modifications to the 36 Drum barrel?

[LuckyLuigi69]

yo drac, would it be okay if you totally drilled everything out of the plunger tube, making it 100% hollow?

[GareBear3565]

@djdanman99 ok thanks

[GareBear3565]

couldn't get the clip lock right. reassembled it and i still had to pump it back to remove the clip even after removing what he told me to remove

[djdanman99]

@GareBear3565 you REALLY have to pull to get the clip out

[Gmandingo98]

how the fuck did you get your dremle in the ar?

[mrrsmurf]

so your an engineer right?

[EPICFERRARIGUY]

@Ortinify You dont watch Drac`s videos, do you? It stands for Humans vs Zombies.

[OMGitsDESMOND]

hey drac loving the vids.... just modded my raider and doing custom white and black paint job :p

[clay69a2]

maybe next time you should actually show how to put it back together so other people dont do it and then have a fucked raider brand new wat a waste of money

[LuckyLuigi69]

does the plunger of this blaster have a small air release hole on it?

[The2552a]

@LuckyLuigi69

[LuckyLuigi69]

so is it okay to remove the dart post inside the plunger while removing the AR?

[dajaker101]

@LuckyLuigi69 yep it is i do that whenever i mod my nerf guns

[SabreFan84]

Hey, I've discovered something about the Raider. On the side that the clip well attached to, there's a tab with a screw in it that's holding a tab with a notch that would mesh with the bolt sled, making it so you can't prime the blaster. I removed that, so there's no need for the clip well, then you can sand down the flange where the clip well was. Now, I haven't decided if I should still have it clip-fed, or if I should single it, basically turning it into a Tactical 12 gauge like in TS2.

[iceking115]

how r u going to put it back????

[SabreFan84]

@LordDraconical Is there any way to minimize the clip well? I mean, why won't it prime without the clip well installed? I've got the clip well minimized down to the back "clips" in so it can still prime. I'm trying to go for a SPAS-12 style shotgun.

[EFG44]

Good to know a person understands proper terms for gun parts :3

[XA7XX7AX]

thanks for this vid, i only removed the thing that controls the amount of air, pretty bad ass, but had a tough time getting the casing back together...got it tho and it shoots way further now.. thanks again!

[plasticmeercat]

please help i modded the clip lock but now when the gun is cocked back the clip falls out.... please... oh and u can pry the jam door off without taking the gun apart

[TriigerHappy86]

can the raider hold a clip without the mag weld??

[4xdblack]

if you hold the triger and cock it over and over, it automaticly fires. if there was a way to make it automaticly load then it could be fully automatic

[haloivgta]

why do u always say philps head we get it

[haloivgta]

why do u always say philps head we get it

[brardshepp]

THANKS!DRAC!

[Archerboy666]

4 people phucked up their raiders

[EPICFERRARIGUY]

@Archerboy666 I phucked up my raider and i still put thumbs up, then again it was me failing, not Drac (if it`s even possible for him to fail), and also i was able to fix it

[Archerboy666]

@EPICFERRARIGUY Sadly enough, i made my Raider shoot like Jesus. Which was apparently bad, because the inside of the plunger punched out the back of the outside of the plunger. (unscrew the the grey thing that holds on the stock). the whole back of the plunger was punched out in a full circle, so no air stays in. In other words, it doesn't shoot lol. But it was fun while it lasted.

[rane998]

@Archerboy666 you shouldve put rubber padding on the back of the plunger... but you can always buy the massacre kit from orange mod works anyway(which comes with a new plunger).. so what the heck!

[NITRICIDE]

@Archerboy666 I think i did...

[Archerboy666]

@NITRICIDE What exactly's wrong?

[a007master]

@Archerboy666 i did i toke that white piece out,put it back in but it doesnt work right any more.

[Archerboy666]

@a007master mine popped out the first time i opened it and, and fell apart into 3 pieces+a spring. i could post a video next weekend showing you how to put it back together if you want.

[a007master]

@Archerboy666 thanks but i fixed it,but when i push the handle forward to shoot i doesnt go all the way,and theres a crack between the 2 barrels if you could show why i would do that that would be great.

[achaser100]

@Archerboy666 12 people are phucks

[JimmySilversJr]

My raider is an older one sitting in the back of the shelf in wal-mart.I found out that older raiders suck _____.Mine doesn't shoot 20 feet with good darts and I am not allowed to mod Nerf guns anymore.

[KafloOop]

OMG I have the same silver screwdriver

[LarryMalice]

Hey Drac, could you post a video of a frontgrip mod for the Raider?

[cyllocybin]

you suck when it comes to showing us how to rebuild it thanks

[Errangit]

@CarbonNerf Good luck*

[Errangit]

@CarbonNerf goof luck and I'm sorry but I can't like comments on my iPhone for some reason. I'll check your channel out. Btw which nerf gun do u suggest I buy?

[unboxingdude1999]

How far does the dart go after the mod?

[Chocosaurus12]

how far does it shoot without a mod?

[drummer8x8]

Haha, "set them aside but dont like........lose them...."

[Chocosaurus12]

where are you from

[TomasVergaraTV]

@Chocosaurus12 i think he's Greek

[Chocosaurus12]

are you super rich cus you can afford a hell of alot of toy guns!!

[DaRiddimBoi]

thanks bro. really improved the gun.

[TheTuneAce]

I would like an aluminum nerf gun with quality mechanisms that would wreck the competition

[knexandnerf]

Please can u subscribe to me. I'll try my best for u!

[Eliteguy8569]

THANK YOU!!!! I did this mod and now my raider is AWESOME!

[Awesomenerfer823645]

I did this and now when I shot it is super loud and hardly goes anywhere. Sounds like I am dry firing. is that normal. \/'''''\/

[develpala]

damn tryed it but now my gun is broke

great vid though

I dont blame u

[XxStuPiDGamRZxX]

my nerf gun only cocks back half way now can u help me

[nerfninja6]

raider.



[ckiger15]

do you have freinds

[Donut117]

@ckiger15 you really dont have any idea how popular this shit is, do you

[PRABODH97]

@ckiger15 are u talking to urself in the mirror?

[Duo53153]

how old are you and you still play with nerf gunz?

[Vakama16]

@Duo53153 You're obviously not in college. It's actually quite a fun activity, and it gets incredibly intense. Also, the fact that he does this ON HIS OWN and makes video on it shows anyone that he has a LOT of drive, confidence, imagination, and inginuity. What are you showing by attempting to mock him? Showing that you're a cocky little punk who believes that he/she believes that he/she is above everyone else.

Essentially, that means you're a dick. Don't comment if you're going to be one.

[TheEvilFryingPan]

whats better the raider or the alphatrooper?

[nstrikefan]

@TheEvilFryingPan i tink the alphatrooper

[TR3V0R315]

@TheEvilFryingPan Raider

[FlazeTheHedgehog1]

@TheEvilFryingPan Raider if you want alot of ammo the ranges dont vary alot raider is a bit bigger howver.

[reuelckj]

@TheEvilFryingPan AT

[JimmySilversJr]

@TheEvilFryingPan I think your better off getting the Alpha Trooper due to the fact that there is only a chance of getting a good new Raider.The Alpha Trooper is a newish gun anyways.

[benthenerfman2010]

@TheEvilFryingPan If you want performance, get the alphatrooper. If you want lots of ammo, get the raider.

[teddycrocs]

@benthenerfman2010 You can put a raider drum in the Rayven. Upvote so people see.

[Littleoli19]

@TheEvilFryingPan raider all the way 4 me

[gopherproduction43]

@TheEvilFryingPan The Raider to fit the drum and its more comfy but the alpha has pump action and the slam fire is smoother as in it doesnt jam as often

[lotsofgames100]

@TheEvilFryingPan raider the reloding on the alpha trooper gets jammed a lot

[MrJMG124]

@TheEvilFryingPan RAIDER

[elott100]

@TheEvilFryingPan i would say the raider cos it does not jam as much as the alpha trooper plus it comes with a stock and a 35 drum

[jakeblaster11]

@TheEvilFryingPan i must say from what i used raider but i dont own a alpha trooper but i belive it would be better

[djdanman99]

@TheEvilFryingPan i love your username

[SantiLambarri]

@TheEvilFryingPan the raider is better, the alpha trooper jams a lot and damages the darts

[rane998]

@TheEvilFryingPan alpha trooper has more range.. raider fires faster a little bit... and raider comes with a 35 drum mag so always a plus... but you can buy second hand drum mags on ebay anyway.. so i choose alpha

[0827ant]

@TheEvilFryingPan Raider CS-35 > Alpha Trooper CS-18

[JackAndRizoGunSmiths]

im using the spring form the raider to amp up my recon's power

[gatzuberserker]

so for the clip lock removal, you only remove the little spring and put the other two orange pieces back right?

[TheSkillzClanx]

Is there any way to make the gun quieter after moding???

[dajaker101]

@TheSkillzClanx Put padding at the end of the plunger tube. This will make the gun quieter and will boost the living time of the plunger tube. Hope this helped you.

[jeffboy709]

With the mod what's its range? Im think about doing this mod for nerf battles if it has really good range and accuracy.

[JoelNgTech]

will the plunger tube break if you remove the air restricter?

[JackAndRizoGunSmiths]

@JoelNgTech not if you cushon it with felt or foam, etc.

[starwarsbro99]

Nice tutorial. The only thing is you should of showed us at least how to put it back together(Discarding the screws). I would of done this but I am a dumbass when it comes to me putting back together a nerf gun. Please make a video and reply to this comment ASAP.

[jacob10198]

Fucking hate you if you would of should us how to put it back together I wouldn't of broke it

[99legoking]

@jackass

[TheSurferEddie]

Hey man :)

Thanks helpful video :)

What does the clip lock doo ???

[Nerfdude324]

Hey drac can you mod my raider 35 and make me a moded alpha trooper

[thebomber905]

YOU SUCK ASS

[99legoking]

@thebomber905 stop talking to urself in the mirror

[pikedeath1]

@thebomber905

what lego king said 

[monkeytits0]

I'd also like 30 modded darts that fit in a un modded clip

[skippy35]

Why did you take out the drum lock? Does that effect performance in any way? If not, what does it effect?

[monkeytits0]

@lordDraconical d like to have a nodded raider with with a dessert tan/camo paint job please include every mod that u use for ur raiders. Message me as soon as possible

[monkeytits0]

@lordDraconu

[GavinImagines]

dear lordDrac i have modded my nerf raider and i took out the white piece1:58 to the left of the trigger and it works fine and slamfire perfect but i was wondering how come noone els takes it out? because i thought it was a lock of some sort but im not sure

[Duncan0425]

I did the AR and it did not make a difference.......however when i drilled out the AR i did not make it right through,. all i did was take out the long orange plastic

AR and did not go all the way through if you know what im trying to say. Did not take the safety and the jam door off though. did not think this made a difference!

[theCHA70]

i want the air rectricter out but idk if i should

[MrJobro1]

what about padding the plunger?

[mrmarite99]

what camera do you use??? plz reply!!!!!!

[Lakerguy1000]

What does the clip lock allow you to do?

[AnnaandNoble]

@Lakerguy1000 yeah

[ogmanny98]

can u do this for me lol cba to do it my self

i'll brake it

[redbarron718]

@ogmanny98 He does comissions, but you have to pay.

[ogmanny98]

@redbarron718 im only joking he cant do mine cuz i liv in england.

[superdude4222]

i took pliers and ripped out my jam door with out opening it

[TheRookie141]

@LordDraconical what if u dont have a drill would a knife work???

[ScattGianmarco]

@TheRookie141 if you dont have a drill grab a philips head screw driver and a hammer and beat the living s··· out of it. It works trust me, takes a bit longer but still does the job

[TheRookie141]

@nicwhat4 u take out the whole thing

[nicwhat4]

HELP, when drilling out the AR do you go to town and leave no plastic in the middle or just take out the one large spike.

[ScattGianmarco]

@nicwhat4 there needs to be a clean whole in it. you need to seed through to the end. remove everything in there

[Theclone1320]

I think I will updata the spreng

[pumello47]

I cant find any springs here in australia that fit is there anywhere online that will work just as well?

[MetalBowser22]

After you remove the AR should you put some padding in the bottom of the plunger tube.

[DARKASSASIN777]

Thanks my raider shoots like 3 times as far